Difference between revisions of "Update image through SD-Card for RK3288"
From ESS-WIKI
Yunjin.jiang (talk | contribs) |
Yunjin.jiang (talk | contribs) |
||
| Line 14: | Line 14: | ||
Step 2 : Choose SD card . | Step 2 : Choose SD card . | ||
| + | |||
| + | [[File:Choosesd.jpg|RTENOTITLE]] | ||
Step 3 : Choose update.img . | Step 3 : Choose update.img . | ||
| + | |||
| + | [[File:Chooseupdateimage.jpg|RTENOTITLE]] | ||
Step 4 : Create SD card . | Step 4 : Create SD card . | ||
| − | <span style="color:#FF0000;">'''NOTE : '''</span> | + | [[File:Create sd.jpg|RTENOTITLE]] |
| + | |||
| + | <span style="color:#FF0000;">'''NOTE : '''</span> | ||
The capacity of SD card is at least 4GB. | The capacity of SD card is at least 4GB. | ||
Revision as of 07:14, 20 December 2018
Generate update.img
Step 1 : Put images to AndroidTool/rockdev/image, Make sure path is correct.
Step 2 : Double click rk3328-mkupdate.bat in AndroidTool/rockdev/ .
If there is no error, you will find update.img in AndroidTool/rockdev/ .
Generate SD card
Step 1 : Insert SD card to PC， Double click SD_Firmware_Tool.exe in SDDiskTool .
Step 2 : Choose SD card .
Step 3 : Choose update.img .
Step 4 : Create SD card .
NOTE :
The capacity of SD card is at least 4GB.
Upgrade image from SD card
Step 1 : Insert SD card to device .
Step 2 : Power up or reboot device， it will boot from SD card to auto upgrade images .
Step 3 : When upgrade is finish, you will get "upgrade sucessful,please remove sdcard" on screen or debug console .
Step 4 : Remove SD card， the device will auto reboot .