Difference between revisions of "IoTGateway/BSP/Android/iMX6/FAQ"
From ESS-WIKI
(→boot logo) |
|||
| Line 15: | Line 15: | ||
=boot logo= | =boot logo= | ||
==u-boot== | ==u-boot== | ||
| + | <small> | ||
| + | (1) BSP support | ||
| + | (2) Convert the bmp file to hex value. | ||
| + | (3) Step1. | ||
| + | Add adv_bmp.o in board/freescale/common/Makefile | ||
| + | Add adv_bmp.c in board/freescale/common/ | ||
| + | Step2. | ||
| + | Modify LCD setting in board/freescale/mx6q-rom-3420/mx6q_rom-3420.c | ||
| + | Fill in correct timing parameters for customer panel (Phill provide parameter). | ||
| + | Step3. | ||
| + | Enable CONFIG_SPLASH_SCREEN config | ||
| + | Set lvds_num to 0, because we use LVDS0 channel. </small> | ||
==kernel== | ==kernel== | ||
Revision as of 04:40, 14 July 2016
i.MX6 Android - Frequently Asked Questions
compiling
u-boot
kernel
application
boot logo
u-boot
(1) BSP support
(2) Convert the bmp file to hex value.
(3) Step1.
Add adv_bmp.o in board/freescale/common/Makefile
Add adv_bmp.c in board/freescale/common/
Step2.
Modify LCD setting in board/freescale/mx6q-rom-3420/mx6q_rom-3420.c
Fill in correct timing parameters for customer panel (Phill provide parameter).
Step3.
Enable CONFIG_SPLASH_SCREEN config
Set lvds_num to 0, because we use LVDS0 channel.
kernel
SDcard image
mini-PCIe