Difference between revisions of "IoTGateway/BSP/Android/iMX6/FAQ"
From ESS-WIKI
| Line 11: | Line 11: | ||
| 1 | | 1 | ||
| Compiling | | Compiling | ||
| − | | | + | | Android |
| − | | | + | | <small> |
| + | Please refer to the following sections for details | ||
| + | <sub>([[Android BSP User Guide#To_build|Android]])</sub> | ||
| + | |||
|- | |- | ||
| 2 | | 2 | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| Boot Logo | | Boot Logo | ||
| U-boot | | U-boot | ||
| Line 36: | Line 34: | ||
Set lvds_num to 0, because we use LVDS0 channel.<small> | Set lvds_num to 0, because we use LVDS0 channel.<small> | ||
|- | |- | ||
| − | | | + | | 3 |
| Boot Logo | | Boot Logo | ||
| Kernel | | Kernel | ||
Revision as of 10:23, 15 July 2016
i.MX6 Android - Frequently Asked Questions
| Item | Questions | Solution | |
|---|---|---|---|
| 1 | Compiling | Android |
Please refer to the following sections for details (Android) |
| 2 | Boot Logo | U-boot |
(1) BSP support
(2) Convert the bmp file to hex value.
Example : bmp file name is aaa.c
(3) Step1.
Add aaa.o in board/freescale/common/Makefile
Add aaa.c in board/freescale/common/
Step2.
Modify LCD setting in board/freescale/mx6q-rom-3420/mx6q_rom-3420.c
Fill in correct timing parameters for customer panel (Phill provide parameter).
Step3.
Enable CONFIG_SPLASH_SCREEN config
Set lvds_num to 0, because we use LVDS0 channel.
|
| 3 | Boot Logo | Kernel |
(1) Please rename your Logo file to "android-logo-mask.png"
(2) Replace the logo image file
--> android_M6.0.1_1.0.0/frameworks/base/core/res/assets/images/android-logo-mask.png.
|