Difference between revisions of "UIO-4030"
From ESS-WIKI
| Line 36: | Line 36: | ||
pin#9: gpio 125, pin#10: gpio 126 | pin#9: gpio 125, pin#10: gpio 126 | ||
pin#11: gpio 127, pin#12: 133</pre> | pin#11: gpio 127, pin#12: 133</pre> | ||
| + | |||
| + | == '''RSB-3720 測試方法: ''' == | ||
| + | |||
| + | '''RS-232(COM3):''' | ||
| + | <pre># stty -F /dev/ttymxc1 -echo -onlcr 115200 | ||
| + | # cat /dev/ttymxc1 & | ||
| + | # echo "Serial Port Test" /dev/ttymxc1</pre> | ||
| + | |||
| + | '''RS-485''' | ||
| + | |||
| + | '''Note: ''' | ||
| + | |||
| + | '''Adam-4520<br/>Data- : Pin1<br/>Data+ : Pin2<br/>Remember to set up RS-485 before test.''' | ||
| + | <pre># stty -F /dev/ttyUSB0 speed 115200 ignbrk -brkint -icrnl -imaxbel -opost -onlcr -isig -icanon -iexten -echo -echoe -echok -echoctl -echoke | ||
| + | # cat /dev/ttyUSB0 & | ||
| + | # echo "Serial Test" > /dev/ttyUSB0</pre> | ||
| + | |||
| + | '''GPIO''' | ||
| + | |||
| + | Note:<br/>input pin#5: gpio 504(DB9-1)<br/>output pin#6: gpio 505(DB9-6)<br/>input pin#7: gpio 506(DB9-2)<br/>output pin#8: gpio 507(DB9-7)<br/>input pin#9: gpio 508(DB9-3)<br/>output pin#10: gpio 509(DB9-8)<br/>input pin#11: gpio 139(DB9-4)<br/>output pin#12: gpio 138(DB9-9) | ||
| + | <pre># echo 504 > /sys/class/gpio/export | ||
| + | # echo 505 > /sys/class/gpio/export | ||
| + | # echo out > /sys/class/gpio/gpio2/direction | ||
| + | # echo in > /sys/class/gpio/gpio1/direction | ||
| + | # cat /sys/class/gpio/gpio1/value | ||
| + | # echo 1 > /sys/class/gpio/gpio2/value | ||
| + | # cat /sys/class/gpio/gpio1/value | ||
| + | </pre> | ||
| + | |||
| + | [[File:RSB-3720 GPIOp1.png]] | ||
| + | <pre># echo 506 > /sys/class/gpio/export | ||
| + | # echo 507 > /sys/class/gpio/export | ||
| + | # echo out > /sys/class/gpio/gpio4/direction | ||
| + | # echo in > /sys/class/gpio/gpio3/direction | ||
| + | # cat /sys/class/gpio/gpio3/value | ||
| + | # echo 1 > /sys/class/gpio/gpio4/value | ||
| + | # cat /sys/class/gpio/gpio3/value</pre> | ||
| + | |||
| + | [[File:RSB-3720 GPIOp2.png]] | ||
| + | <pre># echo 508 > /sys/class/gpio/export | ||
| + | # echo 509 > /sys/class/gpio/export | ||
| + | # echo out > /sys/class/gpio/gpio6/direction | ||
| + | # echo in > /sys/class/gpio/gpio5/direction | ||
| + | # cat /sys/class/gpio/gpio5/value | ||
| + | # echo 1 > /sys/class/gpio/gpio6/value | ||
| + | # cat /sys/class/gpio/gpio5/value | ||
| + | </pre> | ||
| + | |||
| + | [[File:RSB-3720 GPIOp3.png]] | ||
| + | <pre># echo 139 > /sys/class/gpio/export | ||
| + | # echo 138 > /sys/class/gpio/export | ||
| + | # echo out > /sys/class/gpio/gpio8/direction | ||
| + | # echo in > /sys/class/gpio/gpio7/direction | ||
| + | # cat /sys/class/gpio/gpio7/value | ||
| + | # echo 1 > /sys/class/gpio/gpio8/value | ||
| + | # cat /sys/class/gpio/gpio7/value</pre> | ||
| + | |||
| + | [[File:RSB-3720 GPIOp4.png]] | ||
Revision as of 08:10, 29 October 2021
接口布局和尺寸(Layout and Sizes)
Specifications
RSB-3430 測試方法:
Note: RS-232: /dev/ttymxc2
GPIO : need to connect loopback.
RS-485: pin1 data- & pin2 data+ (ttyUSB0)
RS-232
$ stty -F /dev/ttymxc2 -echo -onlcr 115200 crtscts $ cat /dev/ttymxc2 & $ echo "Serial Port Test" > /dev/ttymxc2
RS485
Test RS-485 with Adam-4520.
$ stty -F /dev/ttyUSB0 115200 $ echo "Serial Test" > /dev/ttyUSB0
GPIO
[EXTENSION I/O B] pin#5: gpio 121, pin#6: gpio 122 pin#7: gpio 123, pin#8: gpio 124 pin#9: gpio 125, pin#10: gpio 126 pin#11: gpio 127, pin#12: 133
RSB-3720 測試方法:
RS-232(COM3):
# stty -F /dev/ttymxc1 -echo -onlcr 115200 # cat /dev/ttymxc1 & # echo "Serial Port Test" /dev/ttymxc1
RS-485
Note:
Adam-4520
Data- : Pin1
Data+ : Pin2
Remember to set up RS-485 before test.
# stty -F /dev/ttyUSB0 speed 115200 ignbrk -brkint -icrnl -imaxbel -opost -onlcr -isig -icanon -iexten -echo -echoe -echok -echoctl -echoke # cat /dev/ttyUSB0 & # echo "Serial Test" > /dev/ttyUSB0
GPIO
Note:
input pin#5: gpio 504(DB9-1)
output pin#6: gpio 505(DB9-6)
input pin#7: gpio 506(DB9-2)
output pin#8: gpio 507(DB9-7)
input pin#9: gpio 508(DB9-3)
output pin#10: gpio 509(DB9-8)
input pin#11: gpio 139(DB9-4)
output pin#12: gpio 138(DB9-9)
# echo 504 > /sys/class/gpio/export # echo 505 > /sys/class/gpio/export # echo out > /sys/class/gpio/gpio2/direction # echo in > /sys/class/gpio/gpio1/direction # cat /sys/class/gpio/gpio1/value # echo 1 > /sys/class/gpio/gpio2/value # cat /sys/class/gpio/gpio1/value
# echo 506 > /sys/class/gpio/export # echo 507 > /sys/class/gpio/export # echo out > /sys/class/gpio/gpio4/direction # echo in > /sys/class/gpio/gpio3/direction # cat /sys/class/gpio/gpio3/value # echo 1 > /sys/class/gpio/gpio4/value # cat /sys/class/gpio/gpio3/value
# echo 508 > /sys/class/gpio/export # echo 509 > /sys/class/gpio/export # echo out > /sys/class/gpio/gpio6/direction # echo in > /sys/class/gpio/gpio5/direction # cat /sys/class/gpio/gpio5/value # echo 1 > /sys/class/gpio/gpio6/value # cat /sys/class/gpio/gpio5/value
# echo 139 > /sys/class/gpio/export # echo 138 > /sys/class/gpio/export # echo out > /sys/class/gpio/gpio8/direction # echo in > /sys/class/gpio/gpio7/direction # cat /sys/class/gpio/gpio7/value # echo 1 > /sys/class/gpio/gpio8/value # cat /sys/class/gpio/gpio7/value
