Difference between revisions of "UIO-4032"
From ESS-WIKI
| Line 53: | Line 53: | ||
# cat /dev/ttymxc1 & | # cat /dev/ttymxc1 & | ||
# echo "Serial Port Test" > /dev/ttymxc1</pre> | # echo "Serial Port Test" > /dev/ttymxc1</pre> | ||
| + | |||
| + | [[File:RSB-3720 4032 232 pic1.png]] | ||
| + | |||
| + | '''RS-232(COM3):''' | ||
| + | <pre># stty -F /dev/ttymxc3 -echo -onlcr 115200 | ||
| + | # cat /dev/ttymxc3 & | ||
| + | # echo "Serial Port Test" > /dev/ttymxc3</pre> | ||
| + | |||
| + | [[File:RSB-3720 4032 232 pic2.png]] | ||
| + | |||
| + | '''USB ''' | ||
| + | <pre>USB3.0 HUB+USB Keyeboard&Mouse | ||
| + | USB3.0 driver data copy compare</pre> | ||
| + | |||
| + | '''Ethernet''' | ||
| + | |||
| + | [[File:RSB-3720 4032 ethernet pic1.png]] | ||
| + | |||
| + | [[File:RSB-3720 4032 ethernet pic2.png]] | ||
Revision as of 08:20, 29 October 2021
接口布局和尺寸(Layout and Sizes)
Specifications
RSB-3430 測試方法
RS-232 x2 :
Note:ttymxc2 –COM_3 ttymxc3-COM_4
'''$ stty -F /dev/ttymxc2 -echo -onlcr 115200 crtscts $ cat /dev/ttymxc2 & $ echo "Serial Port Test" > /dev/ttymxc2
USB
Insert a USB disk usb 1-1.2: new high-speed USB device number 4 using ci_hdrc usb-storage 1-1.2:1.0: USB Mass Storage device detected scsi2 : usb-storage 1-1.2:1.0 scsi 2:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS sd 2:0:0:0: [sda] 3862528 512-byte logical blocks: (1.97 GB/1.84 GiB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] No Caching mode page found sd 2:0:0:0: [sda] Assuming drive cache: write through sd 2:0:0:0: [sda] No Caching mode page found sd 2:0:0:0: [sda] Assuming drive cache: write through sda: sda1 sd 2:0:0:0: [sda] No Caching mode page found sd 2:0:0:0: [sda] Assuming drive cache: write through sd 2:0:0:0: [sda] Attached SCSI removable disk
LAN
ifconfig eth1 8.8.8.8
RSB-3720 測試方法
COM Port
Rear IO – RS-232 x 2
USB x 2
Ethernet x 1
Note:
ttymxc1 – COM3
ttymxc3 – COM4
RS-232(COM3):
# stty -F /dev/ttymxc1 -echo -onlcr 115200 # cat /dev/ttymxc1 & # echo "Serial Port Test" > /dev/ttymxc1
RS-232(COM3):
# stty -F /dev/ttymxc3 -echo -onlcr 115200 # cat /dev/ttymxc3 & # echo "Serial Port Test" > /dev/ttymxc3
USB
USB3.0 HUB+USB Keyeboard&Mouse USB3.0 driver data copy compare
Ethernet
