Difference between revisions of "RSB-4710 user guide"

Revision as of 02:51, 21 March 2022

資源特性(Features)

• Rockchip RK3399 ARM Dual Cortex-A72 and Quad Cortex-A53 1.8 GHz
• Onboard 2GB LPDDR4 memory and 16GB eMMC
• Dual HDMI(4K 60fps + 1080P), 1 x eDP, 1 x dual channel LVDS, 1 x MIPI CSI
• Supports 4K H.264/H.265 video decoder
• 6 x serial, 1 x USB3.0, 4 x USB2.0 ,1 x USB OTG, 2 x GbE, 1 x SPI, 1 x I2C, 5 x GPIOs
• M.2 for WIFI/BT support, mini-PCIe for 3G/4G support
• Supports Debian9/10 and Android7.1/10.0

訂購資訊(Ordering Information)

更换一张RSB-4710订购咨询图片

Packing List

接口布局和尺寸(Layout and Sizes)

接口布局圖 Board Dimension Layout 

更换一张RSB-4710正面接口图

 Connector List

接口引脚定義 (Pin definitions)

• 电池扣（RTC）
• 串口（RS-232 (COM1)，RS-232/Debug Port (COM2/DEBUG)，RS-232/485 (COM56)，Internal RS-232 (COM34)）
• 显示接口（LVDS,LVDS_BL,EDP,HDMI）
• LAN接口（LAN1，LAN2）
• USB接口（USB1，Pin Header，OTG）
• 音频接口（Audio）
• Micro SD & Nano SIM Card
• 电源及指示灯和开关机复位按钮（DC Power，Power Button and LED）
• Mini PCIe & MIPI CSI 接口
• M.2接口
• GPIO接口
• SPI ，I2C接口
• RSB-4710 Jumper List

机械尺寸  (Mechanical Characteristics)

插一张RSB-4710机械尺寸图

快速入门 (Quick Start)

系统下载 (OS Download)

Debian 9 ：

Baidu link for Debian9 Password：dn35

Debian 10：

Baidu link for Debian10 Password：nvpp
Dropbox link for Debian10

Android 7.1.2

Baidu for Android 7.1.2   提取码：1r5f

RISC Platform (RSB4710/RSB4710Lite/ROM5780)

Android 10.0

Baidu for Android 10.0   提取码：muqf

RISC Platform (RSB4710/ROM5780)

Android &Debian 燒錄方法 (Android Flash eMMC Method) 

There are three ways to update images：

1._Using_AndroidToool.

There is no limitation by this way.

2._Using_storage（such sd_or_USB_disk）with_update.zip_in_it.

There are some limitations：

（1）The device must be able to boot up to Android system.

（2）Only update images from the same os,  eg : 

        Android6.0 upgrade to Android6.0 or Android7.1 upgrade to Android7.1.

（3）Using update.zip to upgrade. (see more detail in "Create OTA zip" on how to create update.zip)

3._Using_bootup_sd_disk made_by SDDiskTool.

（1）Only update images from the same os,  eg : 

         Android6.0 upgrade to Android6.0 or Android7.1 upgrade to Android7.1.

（2）Using update.img to upgrade.

Linux系统的基本使用(Linux System Basic Operating Method)

User Guide

RISC series(RSB-3710/RSB-4710/ROM-5780)

• Linux BSP User Guide for rk3399 series Debian9/Debian10
• Getting Start
• MAC_Address

DS-100 

• Linux BSP User Guide for rk3399 series Debian9
• Linux BSP User Guide for rk3399 series DeviceOn
• Linux BSP User Guide for SGI [DMS-SA53]

乙太網路使用方法(Ethernent Testing Method)

Command : ifconfig 

root@linaro-alip:~# ifconfig
docker0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        inet 172.17.0.1  netmask 255.255.0.0  broadcast 172.17.255.255
        ether 02:42:bc:42:ea:29  txqueuelen 0  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.127.101  netmask 255.255.255.0  broadcast 192.168.127.255
        inet6 fe80::f388:3086:eb32:1c03  prefixlen 64  scopeid 0x20<link>
        ether 3a:20:49:42:53:53  txqueuelen 1000  (Ethernet)
        RX packets 26  bytes 4937 (4.8 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 44  bytes 4934 (4.8 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
        device interrupt 24
eth1: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        ether 20:25:70:4d:20:73  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1  (Local Loopback)
        RX packets 564  bytes 37788 (36.9 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 564  bytes 37788 (36.9 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

Command : ping 192.168.127.101

root@linaro-alip:~# ping 192.168.127.101
PING 192.168.127.101 (192.168.127.101) 56(84) bytes of data.
64 bytes from 192.168.127.101: icmp_seq=1 ttl=64 time=0.152 ms
64 bytes from 192.168.127.101: icmp_seq=2 ttl=64 time=0.136 ms
64 bytes from 192.168.127.101: icmp_seq=3 ttl=64 time=0.135 ms
64 bytes from 192.168.127.101: icmp_seq=4 ttl=64 time=0.133 ms
64 bytes from 192.168.127.101: icmp_seq=5 ttl=64 time=0.136 ms
^C
--- 192.168.127.101 ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 6ms
rtt min/avg/max/mdev = 0.133/0.138/0.152/0.012 ms
root@linaro-alip:~#

WiFi使用方法(WIFI Testing Method)

4G使用方法(4G Testing Method)

蓝牙使用方法(BlueTooth Operating Method)

音訊使用方法(BlueTooth Operating Method)

I2C 測試( I2C Test method) 

看門狗測試 (Watch Dog Test method) 

攝像頭測試(Camera Test method) 

遠程訪問及文件傳輸(Remote Access and File Transimmion)

              查看主板IP位址 ( Chech IP Address )：​

        Command : ifconfig

通用方法(General Method)

      查看CPU温度(Check CPU Temperature)

    root@imx8mprsb3720a1:/# cat /sys/devices/virtual/thermal/thermal_zone0/temp   40000

    # 或者直接以度爲單位顯示 echo $[$(cat /sys/class/thermal/thermal_zone0/temp)/1000]° >>> 40°

      查看CPU频率(Check CPU Frequency)

           cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq 
           >> 1200000
           cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq    
           >> 1800000

      查看内存容量(Check Memory Capacity)

root@imx8mprsb3720a1:/# busybox free -m
              total        used        free      shared  buff/cache   available
Mem:        6002524      393988     5517304       18460       91232     5507676
Swap:             0           0           0

      查看存储容量(Check Storage Capacity)

root@imx8qxprom5620a1:/# busybox df -h
Filesystem                Size      Used Available Use% Mounted on
/dev/root                13.4G      1.7G     11.1G  13% /
devtmpfs                395.8M      4.0K    395.8M   0% /dev
tmpfs                   876.4M         0    876.4M   0% /dev/shm
tmpfs                   876.4M     16.5M    859.9M   2% /run
tmpfs                   876.4M         0    876.4M   0% /sys/fs/cgroup
tmpfs                   876.4M      4.0K    876.4M   0% /tmp
tmpfs                   876.4M    280.0K    876.2M   0% /var/volatile
/dev/mmcblk0p2           13.6G      1.7G     11.3G  13% /run/media/mmcblk0p2
/dev/mmcblk0p1           63.9M     23.4M     40.5M  37% /run/media/mmcblk0p1
/dev/mmcblk1p1           63.9M     23.4M     40.5M  37% /run/media/mmcblk1p1
tmpfs                   175.3M     88.0K    175.2M   0% /run/user/0
root@imx8qxprom5620a1:/#

設置RTC (RTC Setting) 

 Disable RTC sync service
# systemctl disable ntpd.service
 
# systemctl stop systemd-timesyncd
# systemctl stop ntpdate.service
 
Set system time to current, then write to RTC
# date 040710522021 && hwclock -w && date
 
Set incorrect time, then read time from RTC
# date 010100002000 && hwclock -r && date
 
Restart the RTC time to system time
# hwclock -s && date

QT 安装步骤

Qt5Creator_toolchain_Qt_5.11.3