Difference between revisions of "ROM-5722 user guide"

From ESS-WIKI
Jump to: navigation, search
Line 1: Line 1:
 +
 
== '''資源特性(Features)''' ==
 
== '''資源特性(Features)''' ==
  
−
*NXP Arm® Cortex®-A53 i.MX8M Plus Quad/Dual up to 1.8 GHz
+
*NXP Arm® Cortex®-A53 i.MX8M Plus Quad/Dual up to 1.8 GHz  
−
*1 x Arm Cortex-M7 core
+
*1 x Arm Cortex-M7 core  
−
*Onboard LPDDR4 6 GB, 4000MT/s memory
+
*Onboard LPDDR4 6 GB, 4000MT/s memory  
−
*1 x 4 lane MIPI-CSI,1 x Dual channel LVDS or 1 x Display Port
+
*1 x 4 lane MIPI-CSI,1 x Dual channel LVDS or 1 x Display Port  
−
*4 x USB2.0, 1 x USB 2.0 OTG, 4 x UART, 5 x I2C, 14 x GPIO, 1 x PCIe3.0, 2 x Gigabit LAN, 2 x CAN-FD
+
*4 x USB2.0, 1 x USB 2.0 OTG, 4 x UART, 5 x I2C, 14 x GPIO, 1 x PCIe3.0, 2 x Gigabit LAN, 2 x CAN-FD  
−
*Neural network accelerator up to 2.3 TOPS
+
*Neural network accelerator up to 2.3 TOPS  
−
*Supports Ycoto Linux and Android
+
*Supports Ycoto Linux and Android  
  
 
== '''訂購資訊(Ordering Information)''' ==
 
== '''訂購資訊(Ordering Information)''' ==
Line 19: Line 20:
 
[[File:ROM-5722 module 2021-10-20 155940.jpg|RTENOTITLE]]
 
[[File:ROM-5722 module 2021-10-20 155940.jpg|RTENOTITLE]]
  
−
 
+
 
  
 
=== '''ROM-DB5901 接口布局圖 Board Dimension Layout''' ===
 
=== '''ROM-DB5901 接口布局圖 Board Dimension Layout''' ===
Line 27: Line 28:
 
[[File:ROM-DB5901 IO.jpg|RTENOTITLE]]
 
[[File:ROM-DB5901 IO.jpg|RTENOTITLE]]
  
−
 
+
 
  
 
=== '''主板内置插针式引脚排序方式 (Pin Header defination) ''' ===
 
=== '''主板内置插针式引脚排序方式 (Pin Header defination) ''' ===
Line 35: Line 36:
 
[[File:ROM-DB5901 IO2.jpg|RTENOTITLE]]
 
[[File:ROM-DB5901 IO2.jpg|RTENOTITLE]]
  
−
{| border="1" cellspacing="1" cellpadding="1"
+
{| border="1" cellpadding="1" cellspacing="1"
 
|-
 
|-
 
| '''Position'''
 
| '''Position'''
Line 42: Line 43:
 
|-
 
|-
 
| BAT1
 
| BAT1
−
| PIN Header for Battery<br/>
+
| PIN Header for Battery
−
| WAFER 8P 2.54mm 180D(M) DIP<br/>A2543WV2-8P<br/>
+
| WAFER 8P 2.54mm 180D(M) DIP<br/> A2543WV2-8P
 
|-
 
|-
 
| BH1
 
| BH1
−
| RTC Battery Holder<br/>
+
| RTC Battery Holder
−
| BATTERY HOLDER 24.9*23.4*8.9<br/>CR2032 BH800.4GG<br/>
+
| BATTERY HOLDER 24.9*23.4*8.9<br/> CR2032 BH800.4GG
 
|-
 
|-
 
| CAN1
 
| CAN1
−
| CANBus Port 1<br/>
+
| CANBus Port 1
−
| BOX HEADER 5x2P 2.54mm 180D(M)<br/>DIP 23N6960-10S10<br/>
+
| BOX HEADER 5x2P 2.54mm 180D(M)<br/> DIP 23N6960-10S10
 
|-
 
|-
 
| CAN2
 
| CAN2
−
| CANBus Port 2<br/>
+
| CANBus Port 2
−
| BOX HEADER 5x2P 2.54mm 180D(M)<br/>DIP 23N6960-10S10<br/>
+
| BOX HEADER 5x2P 2.54mm 180D(M)<br/> DIP 23N6960-10S10
 
|-
 
|-
 
| COM1
 
| COM1
−
| COM Port 1<br/>
+
| COM Port 1
−
| BOX HEADER 5x2P 2.54mm 180D(M)<br/>DIP 23N6960-10S10<br/>
+
| BOX HEADER 5x2P 2.54mm 180D(M)<br/> DIP 23N6960-10S10
 
|-
 
|-
 
| COM3
 
| COM3
−
| COM Port 3 (Debug Port)<br/>
+
| COM Port 3 (Debug Port)
−
| BOX HEADER 5x2P 2.54mm 180D(M)<br/>DIP 23N6960-10S10<br/>
+
| BOX HEADER 5x2P 2.54mm 180D(M)<br/> DIP 23N6960-10S10
 
|-
 
|-
 
| CN4
 
| CN4
−
| PCIex1 Connector 1<br/>
+
| PCIex1 Connector 1
−
| PCIEXPRESS 36P 180D(F) DIP<br/>2EG01817-D2D-DF<br/>
+
| PCIEXPRESS 36P 180D(F) DIP<br/> 2EG01817-D2D-DF
 
|-
 
|-
 
| CN5
 
| CN5
−
| PCIex1 Connector 2<br/>
+
| PCIex1 Connector 2
−
| PCIEXPRESS 36P 180D(F) DIP<br/>2EG01817-D2D-DF<br/>
+
| PCIEXPRESS 36P 180D(F) DIP<br/> 2EG01817-D2D-DF
 
|-
 
|-
 
| CN6
 
| CN6
−
| PCIex1 Connector 3<br/>
+
| PCIex1 Connector 3
−
| PCIEXPRESS 36P 180D(F) DIP<br/>2EG01817-D2D-DF<br/>
+
| PCIEXPRESS 36P 180D(F) DIP<br/> 2EG01817-D2D-DF
 
|-
 
|-
 
| CN11
 
| CN11
−
| SATA Connector<br/>
+
| SATA Connector
−
| Serial ATA 7P 1.27mm 180D(M) DIP<br/>WATM-07DBN4A3B8<br/>
+
| Serial ATA 7P 1.27mm 180D(M) DIP<br/> WATM-07DBN4A3B8
 
|-
 
|-
 
| CN12
 
| CN12
−
| SATA Power Connector<br/>
+
| SATA Power Connector
−
| WAFER 4P 2.5mm 180D(M) DIP<br/>24W1161-04S10-01T<br/>
+
| WAFER 4P 2.5mm 180D(M) DIP<br/> 24W1161-04S10-01T
 
|-
 
|-
 
| CN22
 
| CN22
−
| GPIOx8 sets<br/>
+
| GPIOx8 sets
−
| PIN HEADER 10x2P 2.0mm 180D(M)<br/>DIP 21N22050<br/>
+
| PIN HEADER 10x2P 2.0mm 180D(M)<br/> DIP 21N22050
 
|-
 
|-
 
| CN25
 
| CN25
−
| MXM 3.0 Connector<br/>
+
| MXM 3.0 Connector
−
| MXM Conn. 314P 90D(F) SMD<br/>AS0B821-S78B-7H<br/>
+
| MXM Conn. 314P 90D(F) SMD<br/> AS0B821-S78B-7H
 
|-
 
|-
 
| CN26
 
| CN26
−
| M.2 Key E Slots<br/>
+
| M.2 Key E Slots
−
| NGFF 75P 0.5mm 90D(F) H=4.2mm<br/>SMD AS0BC21-S40BE<br/>
+
| NGFF 75P 0.5mm 90D(F) H=4.2mm<br/> SMD AS0BC21-S40BE
 
|-
 
|-
 
| CN38
 
| CN38
 
| FAN (Reserved)
 
| FAN (Reserved)
−
| WTB Con. 3P 2.54mm 180D(M) DIP<br/>A2543WV0-3P-6T-5e<br/>
+
| WTB Con. 3P 2.54mm 180D(M) DIP<br/> A2543WV0-3P-6T-5e
 
|-
 
|-
 
| CN39
 
| CN39
−
| MIPI-CSI1 (FPC, 4-Lane<br/>
+
| MIPI-CSI1 (FPC, 4-Lane
−
| FPC 39P, 0.6mm, H0.9mm<br/>
+
| FPC 39P, 0.6mm, H0.9mm
 
|-
 
|-
 
| CN40
 
| CN40
−
| MIPI-CSI0 (FPC, 2-Lane)<br/>
+
| MIPI-CSI0 (FPC, 2-Lane)
−
| FPC 39P, 0.6mm, H0.9mm<br/>
+
| FPC 39P, 0.6mm, H0.9mm
 
|-
 
|-
 
| CN41
 
| CN41
−
| MIPI-CSI0 (Mini-SAS, 2-Lane)<br/>
+
| MIPI-CSI0 (Mini-SAS, 2-Lane)
−
| Mini SAS 36P/0.8mm/(M)/LCP/VA/G15u/<br/>S/BK/W<br/>
+
| Mini SAS 36P/0.8mm/(M)/LCP/VA/G15u/<br/> S/BK/W
 
|-
 
|-
 
| CN42
 
| CN42
−
| MIPI-CSI1 (Mini-SAS, 4-Lane)<br/>
+
| MIPI-CSI1 (Mini-SAS, 4-Lane)
−
| Mini SAS 36P/0.8mm/(M)/LCP/VA/G15u/<br/>S/BK/W<br/>
+
| Mini SAS 36P/0.8mm/(M)/LCP/VA/G15u/<br/> S/BK/W
 
|-
 
|-
 
| ESPI_CN1
 
| ESPI_CN1
−
| ESPI<br/>
+
| ESPI
−
| PIN HEADER 6x2P 2.0mm180D(M) SMD<br/>21N22050-12M00B<br/>
+
| PIN HEADER 6x2P 2.0mm180D(M) SMD<br/> 21N22050-12M00B
 
|-
 
|-
 
| I2C_GP_1
 
| I2C_GP_1
−
| I2C Pin Header<br/>
+
| I2C Pin Header
−
| WAFER BOX 4P 2.00mm 180D(M) DIP<br/>721-81-04TW00<br/>
+
| WAFER BOX 4P 2.00mm 180D(M) DIP<br/> 721-81-04TW00
 
|-
 
|-
 
| I2C_CN3
 
| I2C_CN3
−
| Audio Codec Board<br/>
+
| Audio Codec Board
−
| PIN HEADER 2x10P 2.54mm 180D(M)<br/>DIP 21N22564<br/>
+
| PIN HEADER 2x10P 2.54mm 180D(M)<br/> DIP 21N22564
 
|-
 
|-
 
| LVDS0
 
| LVDS0
−
| LVDS0<br/>
+
| LVDS0
−
| Wafer 2x20P/1.25mm/(M)/NY9T/VA/GFL/<br/>S/WH/W<br/>
+
| Wafer 2x20P/1.25mm/(M)/NY9T/VA/GFL/<br/> S/WH/W
 
|-
 
|-
 
| LVDS_BK_PWR
 
| LVDS_BK_PWR
−
| LVDS0 Back Light<br/>
+
| LVDS0 Back Light
−
| WAFER BOX 5P 2.0mm 180D(M) DIP<br/>A2001WV2-5P<br/>
+
| WAFER BOX 5P 2.0mm 180D(M) DIP<br/> A2001WV2-5P
 
|-
 
|-
 
| LVDS1
 
| LVDS1
−
| LVDS1<br/>
+
| LVDS1
−
| Wafer 2x20P/1.25mm/(M)/NY9T/VA/GFL/<br/>S/WH/W<br/>
+
| Wafer 2x20P/1.25mm/(M)/NY9T/VA/GFL/<br/> S/WH/W
 
|-
 
|-
 
| LVDS1_BK_PWR
 
| LVDS1_BK_PWR
−
| LVDS1 Back Light<br/>
+
| LVDS1 Back Light
−
| WAFER BOX 5P 2.0mm 180D(M) DIP<br/>A2001WV2-5P<br/>
+
| WAFER BOX 5P 2.0mm 180D(M) DIP<br/> A2001WV2-5P
 
|-
 
|-
 
| SD1
 
| SD1
−
| SD Card Slot<br/>
+
| SD Card Slot
−
| SD CARD 9P 90D(F) SMD WK2192CS3D-<br/>7H<br/>
+
| SD CARD 9P 90D(F) SMD WK2192CS3D-<br/> 7H
 
|-
 
|-
 
| SPI_CN1
 
| SPI_CN1
−
| SPI Pin Header<br/>
+
| SPI Pin Header
−
| PIN HEADER 4x2P 2.54mm 180D(M)<br/>SMD 21N22564<br/>
+
| PIN HEADER 4x2P 2.54mm 180D(M)<br/> SMD 21N22564
 
|-
 
|-
 
| SW2
 
| SW2
−
| Reset Button<br/>
+
| Reset Button
−
| TACT SW STS-091 SMD 4P H=3.8mm<br/>
+
| TACT SW STS-091 SMD 4P H=3.8mm
 
|-
 
|-
 
| SW4
 
| SW4
−
| SLP Button<br/>
+
| SLP Button
−
| TACT SW STS-091 SMD 4P H=3.8mm<br/>
+
| TACT SW STS-091 SMD 4P H=3.8mm
 
|-
 
|-
 
| SW5
 
| SW5
−
| Power Button<br/>
+
| Power Button
−
| TACT SW STS-091 SMD 4P H=3.8mm<br/>
+
| TACT SW STS-091 SMD 4P H=3.8mm
 
|-
 
|-
 
| USB0_OTG1
 
| USB0_OTG1
−
| USB OTG<br/>
+
| USB OTG
−
| Micro USB 5P/0.65mm/(F)/NY9T/GFL/<br/>RA/S/BK/B<br/>
+
| Micro USB 5P/0.65mm/(F)/NY9T/GFL/<br/> RA/S/BK/B
 
|-
 
|-
 
| USB-4-5
 
| USB-4-5
−
| USB Port 4, Port 5<br/>
+
| USB Port 4, Port 5
−
| PIN HEADER 2x5P 2.0mm 180D(M)<br/>SMD 21N22050<br/>
+
| PIN HEADER 2x5P 2.0mm 180D(M)<br/> SMD 21N22050
 
|}
 
|}
  
−
 
+
&nbsp;
  
 
=== '''Rear I/O&nbsp;''' ===
 
=== '''Rear I/O&nbsp;''' ===
Line 180: Line 181:
 
'''[[File:ROM-DB5901 RearIO.jpg|RTENOTITLE]]'''
 
'''[[File:ROM-DB5901 RearIO.jpg|RTENOTITLE]]'''
  
−
{| border="1" cellspacing="1" cellpadding="1"
+
{| border="1" cellpadding="1" cellspacing="1"
 
|-
 
|-
 
| '''Position'''
 
| '''Position'''
Line 207: Line 208:
 
|-
 
|-
 
| CN33
 
| CN33
−
| Type C Controller Programming Header (Reserved Only)<br/>
+
| Type C Controller Programming Header (Reserved Only)
 
| F
 
| F
 
|-
 
|-
 
| CN34
 
| CN34
−
| USB Type C<br/>
+
| USB Type C
 
| G
 
| G
 
|-
 
|-
−
| CN8<br/>
+
| CN8
−
| GbE Ethernet Connector Port<br/>
+
| GbE Ethernet Connector Port
 
| H
 
| H
 
|-
 
|-
 
| CN3
 
| CN3
−
| USB Port 1/ 2<br/>
+
| USB Port 1/ 2
 
| I
 
| I
 
|-
 
|-
−
| Audio1<br/>
+
| Audio1
−
| MIC Input/ Audio Output<br/>
+
| MIC Input/ Audio Output
 
| J
 
| J
 
|}
 
|}
Line 229: Line 230:
 
=== '''接口引脚定義 (Pin definitions)''' ===
 
=== '''接口引脚定義 (Pin definitions)''' ===
  
−
*[[電池(BAT1)_&_電池扣(BH1)|電池(BAT1)&nbsp;& 電池扣(BH1)]]
+
*[[電池(BAT1)_&_電池扣(BH1)|電池(BAT1)&nbsp;& 電池扣(BH1)]]  
−
*[[CAN(CAN1,CAN2)|CAN(CAN1,CAN2)]]
+
*[[CAN(CAN1,CAN2)|CAN(CAN1,CAN2)]]  
−
*[[串口(COM_DB(COM3)、COM0、COM1_、COM2)|串口(COM_DB(COM3)、COM1、UART0&nbsp;、UART2)]]
+
*[[串口(COM_DB(COM3)、COM0、COM1_、COM2)|串口(COM_DB(COM3)、COM1、UART0&nbsp;、UART2)]]  
−
*[[显示接口(LVDS、HDMI)_LAN接口_USB接口(USB1-2、USB3-4、USB_OTG)_音频接口_电源及指示灯和开关机复位按钮_GPIO接口_MINI_PCIE接口_M.2接口_SPI、I2C_接口|显示接口(LVDS、LVDS Backlight、HDMI、DP)]]
+
*[[显示接口(LVDS、HDMI)_LAN接口_USB接口(USB1-2、USB3-4、USB_OTG)_音频接口_电源及指示灯和开关机复位按钮_GPIO接口_MINI_PCIE接口_M.2接口_SPI、I2C_接口|显示接口(LVDS、LVDS Backlight、HDMI、DP)]]  
−
*[[LAN接口|LAN接口(LAN)]]
+
*[[LAN接口|LAN接口(LAN)]]  
−
*[[USB接口(USB1-2、USB_Type_C、USB_OTG)|USB接口(USB1-2、USB-4-5、USB Type C、USB OTG)]]
+
*[[USB接口(USB1-2、USB_Type_C、USB_OTG)|USB接口(USB1-2、USB-4-5、USB Type C、USB OTG)]]  
−
*[[音频接口(Audio)|音频接口(Audio Output &Audio Codec)]]
+
*[[音频接口(Audio)|音频接口(Audio Output &Audio Codec)]]  
−
*[[电源及指示灯和开关机复位按钮(Power_、LED、Power_Button、Reset_Button、Sleep_Button)|电源及指示灯和开关机复位按钮(Power&nbsp;、LED、Power Button、Reset Button、Sleep Button)&nbsp;]]
+
*[[电源及指示灯和开关机复位按钮(Power_、LED、Power_Button、Reset_Button、Sleep_Button)|电源及指示灯和开关机复位按钮(Power&nbsp;、LED、Power Button、Reset Button、Sleep Button)&nbsp;]]  
−
*[[GPIO接口|GPIO接口]]
+
*[[GPIO接口|GPIO接口]]  
−
*[[MINI_PCIE接口_M.2接口_SPI、I2C_接口|MINI_PCIE接口_M.2接口_SPI、I2C_接口]]
+
*[[MINI_PCIE接口_M.2接口_SPI、I2C_接口|MINI_PCIE接口_M.2接口_SPI、I2C_接口]]  
  
 
=== '''机械尺寸&nbsp; ('''Mechanical Characteristics) ===
 
=== '''机械尺寸&nbsp; ('''Mechanical Characteristics) ===
Line 248: Line 249:
 
'''[[File:ROM-5620 Mechanical Specifications2.jpg|RTENOTITLE]]'''
 
'''[[File:ROM-5620 Mechanical Specifications2.jpg|RTENOTITLE]]'''
  
 +
&nbsp;
  
 +
&nbsp;
  
−
 
+
&nbsp;
−
 
 
−
 
 
  
 
----
 
----
Line 260: Line 261:
 
=== '''系统下载 (OS Download)''' ===
 
=== '''系统下载 (OS Download)''' ===
  
−
*'''Linux系统 (Linux OS)''''''&nbsp; &nbsp;'''
+
*'''Linux系统 (Linux OS)''''''&nbsp; &nbsp;'''  
  
 
'''Yocto 3.0:'''[[IoTGateway/BSP/Linux/iMX8/OS_Support_List_3.0|IoTGateway/BSP/Linux/iMX8/OS Support List 3.0]]
 
'''Yocto 3.0:'''[[IoTGateway/BSP/Linux/iMX8/OS_Support_List_3.0|IoTGateway/BSP/Linux/iMX8/OS Support List 3.0]]
Line 288: Line 289:
 
&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;[[File:SDBootupSwitch.jpg|RTENOTITLE]]
 
&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;[[File:SDBootupSwitch.jpg|RTENOTITLE]]
  
−
 
+
&nbsp;
  
 
Step3:打開電源 和 終端機&nbsp;(Turn on the Power & Terminal)
 
Step3:打開電源 和 終端機&nbsp;(Turn on the Power & Terminal)
Line 296: Line 297:
 
Step4: 解壓縮flash tools 檔案,並複製到U盤中(Unzip the flash tools file , then copy to USB Disk)&nbsp;
 
Step4: 解壓縮flash tools 檔案,並複製到U盤中(Unzip the flash tools file , then copy to USB Disk)&nbsp;
  
−
 
+
&nbsp;
  
 
&nbsp; &nbsp; 解壓縮(Unzip the file )
 
&nbsp; &nbsp; 解壓縮(Unzip the file )
Line 320: Line 321:
 
5. 將U盤連接到ROM-5722系統, 進入flsah tool下的mk_inand資歷夾, 執行指令./mksd-linux.sh /dev/mmcblk2燒錄image到eMMC(Connect USB Disk to ROM-5722 system, browser to mk_inand folder and execute flash shell script "./mksd-linux.sh /dev/mmcblk2"
 
5. 將U盤連接到ROM-5722系統, 進入flsah tool下的mk_inand資歷夾, 執行指令./mksd-linux.sh /dev/mmcblk2燒錄image到eMMC(Connect USB Disk to ROM-5722 system, browser to mk_inand folder and execute flash shell script "./mksd-linux.sh /dev/mmcblk2"
  
−
{| border="1" cellspacing="1" cellpadding="1" style="width:500px;"
+
{| border="1" cellpadding="1" cellspacing="1" style="width:500px;"
 
|-
 
|-
 
| ROM-5722
 
| ROM-5722
−
| <br/>
+
| &nbsp;
 
|-
 
|-
 
| SD card
 
| SD card
Line 347: Line 348:
 
   Flow Control流控：无</pre>
 
   Flow Control流控：无</pre>
  
−
:
+
:&nbsp;
  
 
Tera Term Tool&nbsp;
 
Tera Term Tool&nbsp;
Line 365: Line 366:
 
[[File:Debugcom3nn 2021-09-10 140320.jpg|RTENOTITLE]]
 
[[File:Debugcom3nn 2021-09-10 140320.jpg|RTENOTITLE]]
  
−
 
+
&nbsp;
  
 
Log into Terminal&nbsp; Tool (进入串口调试终端)：
 
Log into Terminal&nbsp; Tool (进入串口调试终端)：
Line 395: Line 396:
 
'''&nbsp; &nbsp; &nbsp; U-boot&nbsp;Command&nbsp;:'''&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;
 
'''&nbsp; &nbsp; &nbsp; U-boot&nbsp;Command&nbsp;:'''&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;
  
−
*Display
+
*Display  
−
**HDMI (default)
+
**HDMI (default)  
−
***imx8mp-rom5722-a1.dtb
+
***imx8mp-rom5722-a1.dtb  
−
**LVDS
+
**LVDS  
−
***g070vw01(LVDS0) + HDMI
+
***g070vw01(LVDS0) + HDMI  
−
****imx8mp-rom5722-a1-lvds0-auo.dtb
+
****imx8mp-rom5722-a1-lvds0-auo.dtb  
−
***g070vw01(LVDS1) + HDMI
+
***g070vw01(LVDS1) + HDMI  
−
****imx8mp-rom5722-a1-lvds1-auo.dtb
+
****imx8mp-rom5722-a1-lvds1-auo.dtb  
−
***g215hvn01(DUAL LVDS) + HDMI
+
***g215hvn01(DUAL LVDS) + HDMI  
−
****imx8mp-rom5722-a1-lvds-dual.dtb
+
****imx8mp-rom5722-a1-lvds-dual.dtb    
−
**DSI
+
**DSI  
−
***adv7535(DSI to HDMI)&nbsp;+ HDMI
+
***adv7535(DSI to HDMI)&nbsp;+ HDMI  
−
****imx8mp-rom5722-a1-adv7535.dtb
+
****imx8mp-rom5722-a1-adv7535.dtb  
−
***auog101uan02(DSI) +&nbsp;HDMI
+
***auog101uan02(DSI) +&nbsp;HDMI  
−
****imx8mp-rom5722-a1-auog101uan02.dtb
+
****imx8mp-rom5722-a1-auog101uan02.dtb      
−
*Camera
+
*Camera  
−
**OV5640 (default)
+
**OV5640 (default)  
−
***imx8mp-rom5722-a1.dtb
+
***imx8mp-rom5722-a1.dtb  
−
**Basler camrea
+
**Basler camrea  
−
***imx8mp-rom5722-a1-basler.dtb
+
***imx8mp-rom5722-a1-basler.dtb    
  
 
=== '''乙太網路使用方法(Ethernent Testing Method)''' ===
 
=== '''乙太網路使用方法(Ethernent Testing Method)''' ===
Line 473: Line 474:
 
[[File:Z39.jpg|RTENOTITLE]]
 
[[File:Z39.jpg|RTENOTITLE]]
  
−
 
+
&nbsp;
 
<pre>Loop-back Test (Take GPIO0 and GPIO2 as examples)   
 
<pre>Loop-back Test (Take GPIO0 and GPIO2 as examples)   
  
Line 511: Line 512:
 
[[File:SW6&7settingn.jpeg|RTENOTITLE]]
 
[[File:SW6&7settingn.jpeg|RTENOTITLE]]
  
−
MODE1&nbsp; MODE0<br/>&nbsp; &nbsp; 0&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 0&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; LOOPBACK<br/>&nbsp; &nbsp; 0&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 1&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; RS232<br/>&nbsp; &nbsp; 1&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 0&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; RS485<br/>&nbsp; &nbsp; 1&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 1&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; RS422
+
MODE1&nbsp; MODE0<br/> &nbsp; &nbsp; 0&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 0&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; LOOPBACK<br/> &nbsp; &nbsp; 0&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 1&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; RS232<br/> &nbsp; &nbsp; 1&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 0&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; RS485<br/> &nbsp; &nbsp; 1&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 1&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; RS422
  
−
Loopback test (eg. ttymxc0)<br/>Connect loopback test tool
+
Loopback test (eg. ttymxc0)<br/> Connect loopback test tool
  
−
#stty ‐F /dev/ttymxc0 115200<br/># stty ‐F /dev/ttymxc0 ‐echo<br/># cat /dev/ttymxc0 &<br/># echo test > /dev/ttymxc0
+
#stty ‐F /dev/ttymxc0 115200<br/> # stty ‐F /dev/ttymxc0 ‐echo<br/> # cat /dev/ttymxc0 &<br/> # echo test > /dev/ttymxc0  
  
 
=== '''蓝牙使用方法(BlueTooth Operating&nbsp;Method)''' ===
 
=== '''蓝牙使用方法(BlueTooth Operating&nbsp;Method)''' ===
Line 543: Line 544:
 
SSH Remote Log into Device&nbsp;
 
SSH Remote Log into Device&nbsp;
  
−
*SSH远程登录,以putty选择putty.exe(或者使用Xshell、SecureCRT等类似软件)
+
*SSH远程登录,以putty选择putty.exe(或者使用Xshell、SecureCRT等类似软件)  
−
*需要设置远程设备的IP、通讯端口(默认22)、通讯方式，登录后验证用户名密码
+
*需要设置远程设备的IP、通讯端口(默认22)、通讯方式，登录后验证用户名密码  
−
 
 
  
 +
&nbsp;
  
 
[[File:SSHsettingdetail.png|RTENOTITLE]]
 
[[File:SSHsettingdetail.png|RTENOTITLE]]
Line 552: Line 553:
 
[[File:Z42.jpg|RTENOTITLE]]
 
[[File:Z42.jpg|RTENOTITLE]]
  
−
 
+
&nbsp;
  
 
[[File:Z43.jpg|RTENOTITLE]]
 
[[File:Z43.jpg|RTENOTITLE]]
Line 689: Line 690:
 
ERROR: Task (/home/adv/adv-release-bsp/sources/meta-fsl-bsp-release/imx/meta-bsp/recipes-multimedia/gstreamer/gstreamer 1.0-plugins-base_1.14.imx.bb:do_unpack) failed with exit code '1'
 
ERROR: Task (/home/adv/adv-release-bsp/sources/meta-fsl-bsp-release/imx/meta-bsp/recipes-multimedia/gstreamer/gstreamer 1.0-plugins-base_1.14.imx.bb:do_unpack) failed with exit code '1'
  
−
<u>'''============================================================<br/>export GIT_SSL_NO_VERIFY=1<br/>#or<br/>git config --global http.sslverify false<br/>============================================================'''</u>
+
<u>'''============================================================<br/> export GIT_SSL_NO_VERIFY=1<br/> #or<br/> git config --global http.sslverify false<br/> ============================================================'''</u>
 +
 
 +
 
 +
 
 +
{| border="0" cellpadding="10" cellspacing="0" style="width:100%;"
 +
|-
 +
| <iframe height="230" key="advonline" level="campaign" path="en/aim-linux_community/" width="100%"></iframe>
 +
|}

Revision as of 09:24, 19 May 2022

資源特性(Features)

  • NXP Arm® Cortex®-A53 i.MX8M Plus Quad/Dual up to 1.8 GHz
  • 1 x Arm Cortex-M7 core
  • Onboard LPDDR4 6 GB, 4000MT/s memory
  • 1 x 4 lane MIPI-CSI,1 x Dual channel LVDS or 1 x Display Port
  • 4 x USB2.0, 1 x USB 2.0 OTG, 4 x UART, 5 x I2C, 14 x GPIO, 1 x PCIe3.0, 2 x Gigabit LAN, 2 x CAN-FD
  • Neural network accelerator up to 2.3 TOPS
  • Supports Ycoto Linux and Android

訂購資訊(Ordering Information)

RTENOTITLE

接口布局和尺寸(Layout and Sizes)

ROM-5722 接口布局圖 Board Dimension Layout 

RTENOTITLE

 

ROM-DB5901 接口布局圖 Board Dimension Layout

RTENOTITLE

RTENOTITLE

 

主板内置插针式引脚排序方式 (Pin Header defination) 

Internal I/O

RTENOTITLE

Position Description Connector Type
BAT1 PIN Header for Battery WAFER 8P 2.54mm 180D(M) DIP
A2543WV2-8P
BH1 RTC Battery Holder BATTERY HOLDER 24.9*23.4*8.9
CR2032 BH800.4GG
CAN1 CANBus Port 1 BOX HEADER 5x2P 2.54mm 180D(M)
DIP 23N6960-10S10
CAN2 CANBus Port 2 BOX HEADER 5x2P 2.54mm 180D(M)
DIP 23N6960-10S10
COM1 COM Port 1 BOX HEADER 5x2P 2.54mm 180D(M)
DIP 23N6960-10S10
COM3 COM Port 3 (Debug Port) BOX HEADER 5x2P 2.54mm 180D(M)
DIP 23N6960-10S10
CN4 PCIex1 Connector 1 PCIEXPRESS 36P 180D(F) DIP
2EG01817-D2D-DF
CN5 PCIex1 Connector 2 PCIEXPRESS 36P 180D(F) DIP
2EG01817-D2D-DF
CN6 PCIex1 Connector 3 PCIEXPRESS 36P 180D(F) DIP
2EG01817-D2D-DF
CN11 SATA Connector Serial ATA 7P 1.27mm 180D(M) DIP
WATM-07DBN4A3B8
CN12 SATA Power Connector WAFER 4P 2.5mm 180D(M) DIP
24W1161-04S10-01T
CN22 GPIOx8 sets PIN HEADER 10x2P 2.0mm 180D(M)
DIP 21N22050
CN25 MXM 3.0 Connector MXM Conn. 314P 90D(F) SMD
AS0B821-S78B-7H
CN26 M.2 Key E Slots NGFF 75P 0.5mm 90D(F) H=4.2mm
SMD AS0BC21-S40BE
CN38 FAN (Reserved) WTB Con. 3P 2.54mm 180D(M) DIP
A2543WV0-3P-6T-5e
CN39 MIPI-CSI1 (FPC, 4-Lane FPC 39P, 0.6mm, H0.9mm
CN40 MIPI-CSI0 (FPC, 2-Lane) FPC 39P, 0.6mm, H0.9mm
CN41 MIPI-CSI0 (Mini-SAS, 2-Lane) Mini SAS 36P/0.8mm/(M)/LCP/VA/G15u/
S/BK/W
CN42 MIPI-CSI1 (Mini-SAS, 4-Lane) Mini SAS 36P/0.8mm/(M)/LCP/VA/G15u/
S/BK/W
ESPI_CN1 ESPI PIN HEADER 6x2P 2.0mm180D(M) SMD
21N22050-12M00B
I2C_GP_1 I2C Pin Header WAFER BOX 4P 2.00mm 180D(M) DIP
721-81-04TW00
I2C_CN3 Audio Codec Board PIN HEADER 2x10P 2.54mm 180D(M)
DIP 21N22564
LVDS0 LVDS0 Wafer 2x20P/1.25mm/(M)/NY9T/VA/GFL/
S/WH/W
LVDS_BK_PWR LVDS0 Back Light WAFER BOX 5P 2.0mm 180D(M) DIP
A2001WV2-5P
LVDS1 LVDS1 Wafer 2x20P/1.25mm/(M)/NY9T/VA/GFL/
S/WH/W
LVDS1_BK_PWR LVDS1 Back Light WAFER BOX 5P 2.0mm 180D(M) DIP
A2001WV2-5P
SD1 SD Card Slot SD CARD 9P 90D(F) SMD WK2192CS3D-
7H
SPI_CN1 SPI Pin Header PIN HEADER 4x2P 2.54mm 180D(M)
SMD 21N22564
SW2 Reset Button TACT SW STS-091 SMD 4P H=3.8mm
SW4 SLP Button TACT SW STS-091 SMD 4P H=3.8mm
SW5 Power Button TACT SW STS-091 SMD 4P H=3.8mm
USB0_OTG1 USB OTG Micro USB 5P/0.65mm/(F)/NY9T/GFL/
RA/S/BK/B
USB-4-5 USB Port 4, Port 5 PIN HEADER 2x5P 2.0mm 180D(M)
SMD 21N22050

 

Rear I/O 

RTENOTITLE

Position Description Name
DCIN DC Jack A
CN15A UART Port 0 B
CN15B UART Port 2 C
CN1A DP Port D
CN1B HDMI Port E
CN33 Type C Controller Programming Header (Reserved Only) F
CN34 USB Type C G
CN8 GbE Ethernet Connector Port H
CN3 USB Port 1/ 2 I
Audio1 MIC Input/ Audio Output J

接口引脚定義 (Pin definitions)

机械尺寸  (Mechanical Characteristics)

ROM-5620 

RTENOTITLE

RTENOTITLE

 

 

 

快速入门 (Quick Start)

系统下载 (OS Download)

  • 'Linux系统 (Linux OS)'   

Yocto 3.0:IoTGateway/BSP/Linux/iMX8/OS Support List 3.0

Linux 燒錄方法 (Linux Flash eMMC Method)

使用Flash tool 燒錄鏡像到eMMC (Flash image into eMMC by Flash Tools) 

Step0: 檢查SD卡在Linux 環境的代號 (check SD card symbol in Linux system) 

RTENOTITLE

Step1: 創造一張可開機的SD 卡 (Create a bootable SD card)

RTENOTITLE

Step2: 將可開機的SD 卡插入底板SD卡卡槽(Plug the SD card into Carrier board 's SD card slot)

 RTENOTITLE

Step4: 確認開機選擇指撥開關 

           SD 卡開機模式:

           RTENOTITLE

 

Step3:打開電源 和 終端機 (Turn on the Power & Terminal)

Z25.jpg

Step4: 解壓縮flash tools 檔案,並複製到U盤中(Unzip the flash tools file , then copy to USB Disk) 

 

    解壓縮(Unzip the file )

RTENOTITLE 

    複製檔案到U盤中 (Copy the flash file to USB Disk) 

  1. 插入U盤到你的Ubuntu 電腦上 (Plug the USB Disk into you Linux PC

  2. 檢視U盤在Ubuntu 系統代號 (Check the USB Disk's symbol in Ubuntu System) 

RTENOTITLE

 3. 掛載U盤在Ubuntu 系統中 (Mount the USB Disk's in US)

RTENOTITLE

4. 複製檔案到U盤(Copy the file to USB disk)

RTENOTITLE

5. 將U盤連接到ROM-5722系統, 進入flsah tool下的mk_inand資歷夾, 執行指令./mksd-linux.sh /dev/mmcblk2燒錄image到eMMC(Connect USB Disk to ROM-5722 system, browser to mk_inand folder and execute flash shell script "./mksd-linux.sh /dev/mmcblk2"

ROM-5722  
SD card /dev/mmcblk1
eMMC /dev/mmcblk2

Z30.jpg

6. 切換開機switch 1:on 2,3,4,5,6:off來設定成從eMMC開機(Change boot switch to "1:on 2,3,4,5,6:off" to boot from eMMC. Reboot system).

     

Debug 串口調試 (Debug port Setting)

以 Tera Term  为例介绍如何使用串口调试功能 

   Baud Rate波特率：115200
   Data 数据位：8
   Parity 奇偶校验：无
   Stop 停止位：1
   Flow Control流控：无
 

Tera Term Tool 

RTENOTITLE

RTENOTITLE

Check the Sriel port in Device Manager (查看PC端的串口号)：

if you can not identify the Serial device , please check your serial driver. 

RTENOTITLE

Debug port connection (串口連接) 

RTENOTITLE

 

Log into Terminal  Tool (进入串口调试终端)：

RTENOTITLE

Linux系统的基本使用(Linux System Basic Operating Method)

UUU 使用方法(USB Connection (OTG port))

Download uuu tool from (Release [ADVv20210429 · ADVANTECH-Corp/uuu · GitHub]) or in the folder.

uuu (Universal Update Utility) for nxp imx chips -- libuuu_1.3.191-67-ga9523ec

RTENOTITLE

The “imx-boot-imx8mprom5722a1-6G.bin-flash_evk” file be included in 5722A1AIM30LIVA0XXX_iMX8MP_6G_misc.tgz. XXX is the version.

Connect USB cable to USB OTG port.

Change boot switch to "4:on 1,2,3,5,6:off" to boot from force recovery mode.

RTENOTITLEType command below to flash eMMC:

RTENOTITLE

Display Setting (ROM-5722)

      U-boot Command :             

  • Display
    • HDMI (default)
      • imx8mp-rom5722-a1.dtb
    • LVDS
      • g070vw01(LVDS0) + HDMI
        • imx8mp-rom5722-a1-lvds0-auo.dtb
      • g070vw01(LVDS1) + HDMI
        • imx8mp-rom5722-a1-lvds1-auo.dtb
      • g215hvn01(DUAL LVDS) + HDMI
        • imx8mp-rom5722-a1-lvds-dual.dtb
    • DSI
      • adv7535(DSI to HDMI) + HDMI
        • imx8mp-rom5722-a1-adv7535.dtb
      • auog101uan02(DSI) + HDMI
        • imx8mp-rom5722-a1-auog101uan02.dtb
  • Camera
    • OV5640 (default)
      • imx8mp-rom5722-a1.dtb
    • Basler camrea
      • imx8mp-rom5722-a1-basler.dtb

乙太網路使用方法(Ethernent Testing Method)

Command : ifconfig 

RTENOTITLE

Command: Ping - I eth1 8.8.8.8  or Ping - I eth0 8.8.8.8  

RTENOTITLE

WiFi使用方法(WIFI Testing Method)

Command : 


# killall wpa_supplicant
# ifconfig wlan0 up
# iwlist mlan0 scan
WEP:
# iwconfig mlan0 txpower auto essid "SSID" channel 4
# udhcpc -i mlan0

WPA/WPA2:
# wpa_passphrase "SSID" > wpa.conf
Type password
# wpa_supplicant -B -Dwext -imlan0 -c/home/root/wpa.conf
# udhcpc -i mlan0

ping 8.8.8.8
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
64 bytes from 8.8.8.8: icmp_seq=1 ttl=54 time=2.10 ms
64 bytes from 8.8.8.8: icmp_seq=2 ttl=54 time=2.10 ms

RTENOTITLE

4G使用方法(4G Testing Method)

Command:
Test 4G: (EWM-C117FL06E - USB)
Step 1: Connect EWM-C117FL06E to Mini PCIE slot on 9680015491 and connect
the card to CN6 PCIe_D slot on ROM-DB5901.
Step 2: Connect the antenna 1750007990-01 to the SMA (F) connector on
9680015491
and connect the IPEX connector to MT1 on EWM-C117FL06E module.
Step 3: Connect the Mini USB cable from 9680015491 to USB 2.0 Type A port on
ROM-DB5901.
Step 4: Power on and execute the pppd command to connect to the network.

RTENOTITLE

RTENOTITLE

GPIO使用方法(GPIO Operating Method)

GPIO pin:

RTENOTITLE

  

Loop-back Test (Take GPIO0 and GPIO2 as examples)  

Step 1: Connect GPIO0 and GPIO2
Step 2: Export GPIO interface

root@imx8mprom5722a1: ~# echo 114 > /sys/class/gpio/export
root@imx8mprom5722a1: ~# echo 124 > /sys/class/gpio/export

Step 3: Set direction

root@imx8mprom5722a1: ~# echo out > /sys/class/gpio/gpio1/direction
root@imx8mprom5722a1: ~# echo in > /sys/class/gpio/gpio2/direction

Step 4: Read value and set output value then check

root@imx8mprom5722a1: ~# cat /sys/class/gpio/gpio2/value
0
root@imx8mprom5722a1: ~# echo 1 > /sys/class/gpio/gpio1/value
root@imx8mprom5722a1: ~# cat /sys/class/gpio/gpio2/value
1

串口使用方法(Serial Port Operating Method)

RS-232 Test

CN15上(SER0/UART3): /dev/ttymxc2

CN15 下(SER2/UART1): /dev/ttymxc0

COM 3 (A53 debug/SER3/UART2): /dev/ttymxc1

COM 1 (M7 debug/SER1/UART4): /dev/ttymxc3

SW7 Setting (SW7設置) 

RTENOTITLE

MODE1  MODE0
    0            0            LOOPBACK
    0            1            RS232
    1            0            RS485
    1            1            RS422

Loopback test (eg. ttymxc0)
Connect loopback test tool

  1. stty ‐F /dev/ttymxc0 115200
    # stty ‐F /dev/ttymxc0 ‐echo
    # cat /dev/ttymxc0 &
    # echo test > /dev/ttymxc0

蓝牙使用方法(BlueTooth Operating Method)

Command : 

$ hciconfig hci0 up
$ bluetoothctl
$ discoverable on
$ pairable on
$ scan on
[NEW] FC:18:3C:8D:75:F4 myphone
$ scan off
$ pair FC:18:3C:8D:75:F4
$ connect FC:18:3C:8D:75:F4

RTENOTITLE

  遠程訪問及文件傳輸(Remote Access and File Transimmion)

              查看主板IP位址 ( Chech IP Address )：​ 

        Command : ifconfig

RTENOTITLE

Windows下SSH访问及文件传输

SSH Remote Log into Device 

  • SSH远程登录,以putty选择putty.exe(或者使用Xshell、SecureCRT等类似软件)
  • 需要设置远程设备的IP、通讯端口(默认22)、通讯方式，登录后验证用户名密码

 

RTENOTITLE

RTENOTITLE

 

RTENOTITLE

RTENOTITLE

通用方法(General Method)

查看CPU温度(Check CPU Temperature)

    root@imx8mprom5722a1:/# cat /sys/devices/virtual/thermal/thermal_zone0/temp 44600

    # 或者直接以度爲單位顯示 echo $[$(cat /sys/class/thermal/thermal_zone0/temp)/1000]° >>> 45°

查看CPU频率(Check CPU Frequency)

           cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq 
           >> 900000
           cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq    
           >> 1200000

查看内存容量(Check Memory Capacity)

root@imx8mprom5722a1:~# busybox free -m
              total        used        free      shared  buff/cache   available
Mem:        6002516      402812     5505276       26668       94428     5493888
Swap:             0           0           0

查看存储容量(Check Storage Capacity)

root@imx8mprom5722a1:~# busybox df -h
Filesystem                Size      Used Available Use% Mounted on
/dev/root                14.1G      3.6G      9.8G  27% /
devtmpfs                  2.4G      4.0K      2.4G   0% /dev
tmpfs                     2.9G         0      2.9G   0% /dev/shm
tmpfs                     2.9G     25.1M      2.8G   1% /run
tmpfs                     2.9G         0      2.9G   0% /sys/fs/cgroup
tmpfs                     2.9G         0      2.9G   0% /tmp
tmpfs                     2.9G    268.0K      2.9G   0% /var/volatile
/dev/mmcblk2p1           83.0M     29.6M     53.5M  36% /run/media/mmcblk2p1
tmpfs                   586.2M      4.0K    586.2M   0% /run/user/0
/dev/mmcblk1p1           83.0M     29.6M     53.5M  36% /run/media/mmcblk1p1
/dev/mmcblk1p2           14.2G      3.6G     10.0G  26% /run/media/mmcblk1p2
root@imx8mprom5722a1:~#

網路Ping測試(Ping Network Testing)

     ping 8.8.8.8
     PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
     64 bytes from 8.8.8.8: icmp_seq=1 ttl=54 time=2.10 ms
     64 bytes from 8.8.8.8: icmp_seq=2 ttl=54 time=2.10 ms

設置RTC (RTC Setting) 

root@imx8mprom5722a1:~# systemctl stop ntpdate.service
root@imx8mprom5722a1:~# date 090816072021 && hwclock -w && date
Wed Sep  8 16:07:00 UTC 2021
Tue Nov 23 07:38:50 UTC 2021
root@imx8mprom5722a1:~# date
Tue Nov 23 07:38:56 UTC 2021
root@imx8mprom5722a1:~#

         

Linux BSP編譯方法(Linux BSP Compile Method)

Yocto 3.0

如果有驗證上的錯誤 請使用以下的方法

### repo sync failed with Server certificate verification failed. CAfile: /etc/ssl/certs/ca-certificates.crt CRLfile: none ERROR: gstreamer1.0-1.14.4.imx-r0 do_unpack: Fetcher failure: Fetch command export PSEUDO_DISABLED=1; export PATH="/hom e/adv/adv-release-bsp/build_x11/tmp/work/aarch64-poky-linux/gstreamer1.0/1.14.4.imx-r0/recipe-sysroot-native/usr/bin/py thon3-native:/home/adv/adv-release-bsp/sources/poky/scripts:/home/adv/adv-release-bsp/build_x11/tmp/work/aarch64-poky-l inux/gstreamer1.0/1.14.4.imx-r0/recipe-sysroot-native/usr/bin/aarch64-poky-linux:/home/adv/adv-release-bsp/build_x11/tm p/work/aarch64-poky-linux/gstreamer1.0/1.14.4.imx-r0/recipe-sysroot/usr/bin/crossscripts:/home/adv/adv-release-bsp/buil d_x11/tmp/work/aarch64-poky-linux/gstreamer1.0/1.14.4.imx-r0/recipe-sysroot-native/usr/sbin:/home/adv/adv-release-bsp/b uild_x11/tmp/work/aarch64-poky-linux/gstreamer1.0/1.14.4.imx-r0/recipe-sysroot-native/usr/bin:/home/adv/adv-release-bsp /build_x11/tmp/work/aarch64-poky-linux/gstreamer1.0/1.14.4.imx-r0/recipe-sysroot-native/sbin:/home/adv/adv-release-bsp/ build_x11/tmp/work/aarch64-poky-linux/gstreamer1.0/1.14.4.imx-r0/recipe-sysroot-native/bin:/home/adv/adv-release-bsp/so urces/poky/bitbake/bin:/home/adv/adv-release-bsp/build_x11/tmp/hosttools"; export HOME="/home/adv"; git -c core.fsyncob jectfiles=0 submodule update --init --recursive failed with exit code 1, output:

Submodule 'common' (

https://anongit.freedesktop.org/git/gstreamer/common.git) registered for path 'common'

Cloning into '/home/adv/adv-release-bsp/build_x11/tmp/work/aarch64-poky-linux/gstreamer1.0/1.14.4.imx-r0/git/common'...

fatal: unable to access '

https://anongit.freedesktop.org/git/gstreamer/common.git/': server certificate verification fa iled. CAfile: /etc/ssl/certs/ca-certificates.crt CRLfile: none

fatal: clone of '

https://anongit.freedesktop.org/git/gstreamer/common.git' into submodule path '/home/adv/adv-release-b sp/build_x11/tmp/work/aarch64-poky-linux/gstreamer1.0/1.14.4.imx-r0/git/common' failed

Failed to clone 'common'. Retry scheduled

Cloning into '/home/adv/adv-release-bsp/build_x11/tmp/work/aarch64-poky-linux/gstreamer1.0/1.14.4.imx-r0/git/common'...

fatal: unable to access '

https://anongit.freedesktop.org/git/gstreamer/common.git/': server certificate verification fa iled. CAfile: /etc/ssl/certs/ca-certificates.crt CRLfile: none

fatal: clone of '

https://anongit.freedesktop.org/git/gstreamer/common.git' into submodule path '/home/adv/adv-release-b sp/build_x11/tmp/work/aarch64-poky-linux/gstreamer1.0/1.14.4.imx-r0/git/common' failed

Failed to clone 'common' a second time, aborting

ERROR: gstreamer1.0-1.14.4.imx-r0 do_unpack: Function failed: base_do_unpack

ERROR: Logfile of failure stored in: /home/adv/adv-release-bsp/build_x11/tmp/work/aarch64-poky-linux/gstreamer1.0/1.14. 4.imx-r0/temp/log.do_unpack.42631

ERROR: Task (/home/adv/adv-release-bsp/sources/meta-fsl-bsp-release/imx/meta-bsp/recipes-multimedia/gstreamer/gstreamer 1.0_1.14.imx.bb:do_unpack) failed with exit code '1'

ERROR: gstreamer1.0-plugins-base-1.14.4.imx-r0 do_unpack: Fetcher failure: Fetch command export PSEUDO_DISABLED=1; expo rt PATH="/home/adv/adv-release-bsp/build_x11/tmp/work/aarch64-mx8mm-poky-linux/gstreamer1.0-plugins-base/1.14.4.imx-r0/ recipe-sysroot-native/usr/bin/python3-native:/home/adv/adv-release-bsp/sources/poky/scripts:/home/adv/adv-release-bsp/b uild_x11/tmp/work/aarch64-mx8mm-poky-linux/gstreamer1.0-plugins-base/1.14.4.imx-r0/recipe-sysroot-native/usr/bin/aarch6 4-poky-linux:/home/adv/adv-release-bsp/build_x11/tmp/work/aarch64-mx8mm-poky-linux/gstreamer1.0-plugins-base/1.14.4.imx -r0/recipe-sysroot/usr/bin/crossscripts:/home/adv/adv-release-bsp/build_x11/tmp/work/aarch64-mx8mm-poky-linux/gstreamer 1.0-plugins-base/1.14.4.imx-r0/recipe-sysroot-native/usr/sbin:/home/adv/adv-release-bsp/build_x11/tmp/work/aarch64-mx8m m-poky-linux/gstreamer1.0-plugins-base/1.14.4.imx-r0/recipe-sysroot-native/usr/bin:/home/adv/adv-release-bsp/build_x11/ tmp/work/aarch64-mx8mm-poky-linux/gstreamer1.0-plugins-base/1.14.4.imx-r0/recipe-sysroot-native/sbin:/home/adv/adv-rele ase-bsp/build_x11/tmp/work/aarch64-mx8mm-poky-linux/gstreamer1.0-plugins-base/1.14.4.imx-r0/recipe-sysroot-native/bin:/ home/adv/adv-release-bsp/sources/poky/bitbake/bin:/home/adv/adv-release-bsp/build_x11/tmp/hosttools"; export HOME="/hom e/adv"; git -c core.fsyncobjectfiles=0 submodule update --init --recursive failed with exit code 1, output:

Submodule 'common' (

https://anongit.freedesktop.org/git/gstreamer/common.git) registered for path 'common'

Cloning into '/home/adv/adv-release-bsp/build_x11/tmp/work/aarch64-mx8mm-poky-linux/gstreamer1.0-plugins-base/1.14.4.im x-r0/git/common'...

fatal: unable to access '

https://anongit.freedesktop.org/git/gstreamer/common.git/': server certificate verification fa iled. CAfile: /etc/ssl/certs/ca-certificates.crt CRLfile: none

fatal: clone of '

https://anongit.freedesktop.org/git/gstreamer/common.git' into submodule path '/home/adv/adv-release-b sp/build_x11/tmp/work/aarch64-mx8mm-poky-linux/gstreamer1.0-plugins-base/1.14.4.imx-r0/git/common' failed

Failed to clone 'common'. Retry scheduled

Cloning into '/home/adv/adv-release-bsp/build_x11/tmp/work/aarch64-mx8mm-poky-linux/gstreamer1.0-plugins-base/1.14.4.im x-r0/git/common'...

fatal: unable to access '

https://anongit.freedesktop.org/git/gstreamer/common.git/': server certificate verification fa iled. CAfile: /etc/ssl/certs/ca-certificates.crt CRLfile: none

fatal: clone of '

https://anongit.freedesktop.org/git/gstreamer/common.git' into submodule path '/home/adv/adv-release-b sp/build_x11/tmp/work/aarch64-mx8mm-poky-linux/gstreamer1.0-plugins-base/1.14.4.imx-r0/git/common' failed

Failed to clone 'common' a second time, aborting

ERROR: gstreamer1.0-plugins-base-1.14.4.imx-r0 do_unpack: Function failed: base_do_unpack

ERROR: Logfile of failure stored in: /home/adv/adv-release-bsp/build_x11/tmp/work/aarch64-mx8mm-poky-linux/gstreamer1.0 -plugins-base/1.14.4.imx-r0/temp/log.do_unpack.51633

ERROR: Task (/home/adv/adv-release-bsp/sources/meta-fsl-bsp-release/imx/meta-bsp/recipes-multimedia/gstreamer/gstreamer 1.0-plugins-base_1.14.imx.bb:do_unpack) failed with exit code '1'

============================================================
export GIT_SSL_NO_VERIFY=1
#or
git config --global http.sslverify false
============================================================


Retrieved from "https://ess-wiki.advantech.com.tw/wiki/index.php?title=ROM-5722_user_guide&oldid=23969"