Difference between revisions of "UIO-4032"
From ESS-WIKI
| Line 1: | Line 1: | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
== '''Specifications''' == | == '''Specifications''' == | ||
| Line 73: | Line 60: | ||
[[File:RSB-3720 4032 ethernet pic2.png|RTENOTITLE]] | [[File:RSB-3720 4032 ethernet pic2.png|RTENOTITLE]] | ||
| + | |||
| + | |||
| + | |||
| + | |||
| + | <!--== '''接口布局和尺寸(Layout and Sizes)''' == --> | ||
| + | |||
| + | <!--'''[[File:UIO-4032 photo1 2021-10-27 143242.jpg|RTENOTITLE]]''' --> | ||
| + | |||
| + | <!-- | ||
| + | |||
| + | <!--'''[[File:UIO-4032 photo2 2021-10-27 143326.jpg|RTENOTITLE]]''' --> | ||
| + | |||
| + | <!-- --> | ||
| + | |||
| + | <!--'''[[File:UIO-4032 photo3 2021-10-27 143358.jpg|RTENOTITLE]]'''--> | ||
Revision as of 04:47, 29 July 2022
Specifications
RSB-3430 測試方法
RS-232 x2 :
Note:ttymxc2 –COM_3 ttymxc3-COM_4
'''$ stty -F /dev/ttymxc2 -echo -onlcr 115200 crtscts $ cat /dev/ttymxc2 & $ echo "Serial Port Test" > /dev/ttymxc2
USB
Insert a USB disk usb 1-1.2: new high-speed USB device number 4 using ci_hdrc usb-storage 1-1.2:1.0: USB Mass Storage device detected scsi2 : usb-storage 1-1.2:1.0 scsi 2:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS sd 2:0:0:0: [sda] 3862528 512-byte logical blocks: (1.97 GB/1.84 GiB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] No Caching mode page found sd 2:0:0:0: [sda] Assuming drive cache: write through sd 2:0:0:0: [sda] No Caching mode page found sd 2:0:0:0: [sda] Assuming drive cache: write through sda: sda1 sd 2:0:0:0: [sda] No Caching mode page found sd 2:0:0:0: [sda] Assuming drive cache: write through sd 2:0:0:0: [sda] Attached SCSI removable disk
LAN
ifconfig eth1 8.8.8.8
RSB-3720 測試方法
COM Port
Rear IO – RS-232 x 2
USB x 2
Ethernet x 1
Note:
ttymxc1 – COM3
ttymxc3 – COM4
RS-232(COM3):
# stty -F /dev/ttymxc1 -echo -onlcr 115200 # cat /dev/ttymxc1 & # echo "Serial Port Test" > /dev/ttymxc1
RS-232(COM3):
# stty -F /dev/ttymxc3 -echo -onlcr 115200 # cat /dev/ttymxc3 & # echo "Serial Port Test" > /dev/ttymxc3
USB
USB3.0 HUB+USB Keyeboard&Mouse USB3.0 driver data copy compare
Ethernet
