Difference between revisions of "AIR 030 Development"
From ESS-WIKI
| Line 39: | Line 39: | ||
2 5 0 0 I225 FLASH | 2 5 0 0 I225 FLASH | ||
</pre> | </pre> | ||
| − | Flash Mac Address | + | |
| − | To get <span style="color:#0000ff">'''-nic'''</span> value and <span style="color:#0000ff">'''BDF'''</span> value please using above method. | + | Flash Mac Address To get <span style="color:#0000ff">'''-nic'''</span> value and <span style="color:#0000ff">'''BDF'''</span> value please using above method. |
| − | <pre> | + | <pre>$ sudo -s |
| − | $ sudo -s | ||
# setpci -s 0004:04:00.0 COMMAND=0007 | # setpci -s 0004:04:00.0 COMMAND=0007 | ||
# ./EepromAccessTool -nic=1 -f=FXVL_15F2_LM_2MB_ARK_1.82_D.bin -mac=D4E5F6123456 | # ./EepromAccessTool -nic=1 -f=FXVL_15F2_LM_2MB_ARK_1.82_D.bin -mac=D4E5F6123456 | ||
</pre> | </pre> | ||
| + | |||
The other Intel-I226 | The other Intel-I226 | ||
| − | # setpci -s 0004:05:00.0 COMMAND=0007 | + | <pre> |
| − | # ./EepromAccessTool -nic=2 -f=FXVL_15F2_LM_2MB_ARK_1.82_D.bin -mac=D4E5F6123457 | + | #setpci -s 0004:05:00.0 COMMAND=0007 |
| + | #./EepromAccessTool -nic=2 -f=FXVL_15F2_LM_2MB_ARK_1.82_D.bin -mac=D4E5F6123457 | ||
</pre> | </pre> | ||
| + | Please do cold reboot after flash mac address. | ||
| + | |||
| + | How to check whether the flash proccess is success or not | ||
| + | #1.lspci command - If it is 0x125<span style="color:#ff0000">'''f'''</span> value, it failed. | ||
| + | #2.ifconfig -a - Check the nerwork interface is available. ex: eth0, eth1 and so on. | ||
| + | |||
=== Boot On Off === | === Boot On Off === | ||
Revision as of 09:13, 14 October 2022
Contents
Flash
Extract image
$ tar -zxvf air030_image_XXXXXX.tar.gz
Flash image
$ cd bootloader $ sudo -s # source flashcmd.txt
Tools
Flash Mac
Check All Intel-226 Module in PCI bus, The BDF(bus number/device number/function number) value will be first column.
ubuntu@localhost:~$ lspci 0004:00:00.0 PCI bridge: NVIDIA Corporation Device 229c (rev a1) 0004:01:00.0 PCI bridge: ASMedia Technology Inc. Device 2806 (rev 01) 0004:02:00.0 PCI bridge: ASMedia Technology Inc. Device 2806 (rev 01) 0004:02:06.0 PCI bridge: ASMedia Technology Inc. Device 2806 (rev 01) 0004:02:0e.0 PCI bridge: ASMedia Technology Inc. Device 2806 (rev 01) 0004:04:00.0 Ethernet controller: Intel Corporation Device 15f2 (rev 03) 0004:05:00.0 Ethernet controller: Intel Corporation Device 15f2 (rev 03)
Check NIC value with EepromAccessTool tool.
ubuntu@localhost:~$ ./EepromAccessTool Intel(R) EEPROM Access Tool NVM/OTP Programming Example Tool Version 0.8.0 Provided under the terms of a CNDA. Do Not Distribute. Copyright(C) 2017-2020 by Intel(R) Corporation NIC BUS DEV FUN Silicon Memory Type Present === === === === ===== ====================== Check Command open to write error 1 4 0 0 I225 FLASH Check Command open to write error 2 5 0 0 I225 FLASH
Flash Mac Address To get -nic value and BDF value please using above method.
$ sudo -s # setpci -s 0004:04:00.0 COMMAND=0007 # ./EepromAccessTool -nic=1 -f=FXVL_15F2_LM_2MB_ARK_1.82_D.bin -mac=D4E5F6123456
The other Intel-I226
#setpci -s 0004:05:00.0 COMMAND=0007 #./EepromAccessTool -nic=2 -f=FXVL_15F2_LM_2MB_ARK_1.82_D.bin -mac=D4E5F6123457
Please do cold reboot after flash mac address.
How to check whether the flash proccess is success or not
- 1.lspci command - If it is 0x125f value, it failed.
- 2.ifconfig -a - Check the nerwork interface is available. ex: eth0, eth1 and so on.
Boot On Off
The boot count message will be printed before log-in.
Reset the boot count please remove bootCount.tt.
$ rm bootCount.tt
Image
The test image is available HERE.
| Image | Release Note | |
|---|---|---|
| 1 | air030_image_20221006.tar.gz | The first boot up image verified on AGX-ORIN Devkit. |
| 2 | air030_image_20221006_bootonoff.tar.gz | Based on air030_image_20221006.tar.gz added boot on off feature (The system will power off after 40 seconnds) |