Difference between revisions of "AIR 030 Development"
From ESS-WIKI
Line 50: | Line 50: | ||
#./EepromAccessTool -nic=2 -f=FXVL_15F2_LM_2MB_ARK_1.82_D.bin -mac=D4E5F6123457 | #./EepromAccessTool -nic=2 -f=FXVL_15F2_LM_2MB_ARK_1.82_D.bin -mac=D4E5F6123457 | ||
</pre> | </pre> | ||
+ | |||
<span style="color:#0000ff">'''Please do cold reboot after flash mac address.'''</span> | <span style="color:#0000ff">'''Please do cold reboot after flash mac address.'''</span> | ||
Line 65: | Line 66: | ||
== Image == | == Image == | ||
− | The test image is available [https://advantecho365-my.sharepoint.com/personal/jack501_chen_advantech_com/_layouts/15/onedrive.aspx?ga=1&id=/personal/jack501_chen_advantech_com/Documents/AIR-030/image HERE]. | + | The test image is available [https://advantecho365-my.sharepoint.com/personal/jack501_chen_advantech_com/_layouts/15/onedrive.aspx?ga=1&id=/personal/jack501_chen_advantech_com/Documents/AIR-030/image HERE]. <u>The 1st and 2nd image is only available for AGX-ORIN devkit.</u> |
{| border="1" cellpadding="1" cellspacing="1" style="width: 800px;" | {| border="1" cellpadding="1" cellspacing="1" style="width: 800px;" |
Revision as of 09:16, 14 October 2022
Contents
Flash
Extract image
$ tar -zxvf air030_image_XXXXXX.tar.gz
Flash image
$ cd bootloader $ sudo -s # source flashcmd.txt
Tools
Flash Mac
Check All Intel-226 Module in PCI bus, The BDF(bus number/device number/function number) value will be first column.
ubuntu@localhost:~$ lspci 0004:00:00.0 PCI bridge: NVIDIA Corporation Device 229c (rev a1) 0004:01:00.0 PCI bridge: ASMedia Technology Inc. Device 2806 (rev 01) 0004:02:00.0 PCI bridge: ASMedia Technology Inc. Device 2806 (rev 01) 0004:02:06.0 PCI bridge: ASMedia Technology Inc. Device 2806 (rev 01) 0004:02:0e.0 PCI bridge: ASMedia Technology Inc. Device 2806 (rev 01) 0004:04:00.0 Ethernet controller: Intel Corporation Device 15f2 (rev 03) 0004:05:00.0 Ethernet controller: Intel Corporation Device 15f2 (rev 03)
Check NIC value with EepromAccessTool tool.
ubuntu@localhost:~$ ./EepromAccessTool Intel(R) EEPROM Access Tool NVM/OTP Programming Example Tool Version 0.8.0 Provided under the terms of a CNDA. Do Not Distribute. Copyright(C) 2017-2020 by Intel(R) Corporation NIC BUS DEV FUN Silicon Memory Type Present === === === === ===== ====================== Check Command open to write error 1 4 0 0 I225 FLASH Check Command open to write error 2 5 0 0 I225 FLASH
Flash Mac Address To get -nic value and BDF value please using above method.
$ sudo -s # setpci -s 0004:04:00.0 COMMAND=0007 # ./EepromAccessTool -nic=1 -f=FXVL_15F2_LM_2MB_ARK_1.82_D.bin -mac=D4E5F6123456
The other Intel-I226
#setpci -s 0004:05:00.0 COMMAND=0007 #./EepromAccessTool -nic=2 -f=FXVL_15F2_LM_2MB_ARK_1.82_D.bin -mac=D4E5F6123457
Please do cold reboot after flash mac address.
How to check whether the flash proccess is success or not
- lspci command - If it is 0x125f value, it failed.
- ifconfig -a - Check the nerwork interface is available. ex: eth0, eth1 and so on.
Boot On Off
The boot count message will be printed before log-in.
Reset the boot count please remove bootCount.tt.
$ rm bootCount.tt
Image
The test image is available HERE. The 1st and 2nd image is only available for AGX-ORIN devkit.
Image | Release Note | |
---|---|---|
1 | air030_image_20221006.tar.gz | The first boot up image verified on AGX-ORIN Devkit. |
2 | air030_image_20221006_bootonoff.tar.gz | Based on air030_image_20221006.tar.gz added boot on off feature (The system will power off after 40 seconnds) |