Difference between revisions of "AIM-Linux/BSP/WOA/Windows On ARM OS Release note/RSB-3720/RSB3720A1AIM20WIV0007"
From ESS-WIKI
| Line 52: | Line 52: | ||
3.Insert this SD card, adjust boot dip switch to boot from EMMC (OFF-ON-OFF-OFF).<br/> 4.Power on the device, installing the Win10 OS following the system instruction. | 3.Insert this SD card, adjust boot dip switch to boot from EMMC (OFF-ON-OFF-OFF).<br/> 4.Power on the device, installing the Win10 OS following the system instruction. | ||
| + | |||
| + | [[File:Sa66 bootmode.jpg|600px|Sa66 bootmode.jpg]] | ||
Revision as of 01:58, 6 June 2023
Release Note
| SOM | i.MX8MP |
| BSP | W 1.4.0 |
| Windows | W21H2 |
Change Log
| Item |
Change List |
Description |
| 1 | Feature | fix memory size to 6GB |
| 2 | Known Issue | None |
Install the OS to EMMC.
Flash firmware
1.unzip woa_rsb3720_w14_firmware_downloader.img.gz
$ gunzip woa_rsb3720_w14_firmware_downloader.img.gz
2.flash this image to SD card.
$ sudo dd if=woa_rsb3720_w14_firmware_downloader.img of=/dev/sdX bs=10M; sync
3.Insert this SD card, adjust boot dip switch to boot from SD card (ON-ON-OFF-OFF).
4.Power on the device.
5.Watching the screen, power off the device while it show "Flash bootloader for Winodws 10 IT Enterprise ... Done!".
Install OS
1.Unzip tarball file
$ gunzip MSOPK_X23-15068_2021_LTSC_21H2_os_installer_EVK_iMX8MP_W140.img.gz
2.Flash image to SD card
$ sudo dd if=MSOPK_X23-15068_2021_LTSC_21H2_os_installer_EVK_iMX8MP_W140.img of=/dev/sdX bs=10M; sync
3.Insert this SD card, adjust boot dip switch to boot from EMMC (OFF-ON-OFF-OFF).
4.Power on the device, installing the Win10 OS following the system instruction.
