Difference between revisions of "UART（ROM-5880）"
From ESS-WIKI
Xingxing.li (talk | contribs) |
Xingxing.li (talk | contribs) |
||
| Line 27: | Line 27: | ||
[[File:SOM-DB2510 SW1.PNG|RTENOTITLE]][[File:SOM-DB2510 SW2.PNG|RTENOTITLE]] | [[File:SOM-DB2510 SW1.PNG|RTENOTITLE]][[File:SOM-DB2510 SW2.PNG|RTENOTITLE]] | ||
| + | |||
| + | [[File:SOM-DB2510 J21.png]] | ||
| + | |||
| + | === '''RS-232 Test：''' === | ||
| + | |||
| + | 1. 4-wire (Take COM1 for example). | ||
| + | <pre># /tools/test/adv/uart/rs232_4_wire_test.sh /dev/ttyS3</pre> | ||
| + | |||
| + | 2. 2-wire (Take COM4 for example). | ||
| + | <pre># /tools/test/adv/uart/rs232_2_wire_test.sh /dev/ttyS5</pre> | ||
Revision as of 09:13, 5 December 2023
User Debian/Linux UART/serial port access is through the tty-devices. The ttydevices have different names depending on UART drivers for different boards.The default value is RS232.
| Device Node | COM Port Name |
| /dev/ttyS3 | COM1（RS232 4-wire） |
| /dev/ttyS4 | COM3（RS232 4-wire） |
| /dev/ttyS5 | COM4（RS232 2-wire） |
| /dev/ttyS7 | COM2（RS232 2-wire） |
HW Setting for SOM-DB2510
SW1/2：1->ON ，2->OFF
J21：2-3
RS-232 Test：
1. 4-wire (Take COM1 for example).
# /tools/test/adv/uart/rs232_4_wire_test.sh /dev/ttyS3
2. 2-wire (Take COM4 for example).
# /tools/test/adv/uart/rs232_2_wire_test.sh /dev/ttyS5