Difference between revisions of "AIM-Linux/BSP/WOA/Windows On ARM OS Release note/RSB-3720/RSB3720A1AIM20WIV0008"
(Created page with " '''Release Note ''' {| bgcolor="#F8F8F8" border="1" cellpadding="1" cellspacing="1" width="30%" |- | '''SOM ''' | i.MX8MP |- | '''BSP ''' | W 1.4.1 |- | '''Wi...") |
|||
Line 2: | Line 2: | ||
'''Release Note ''' | '''Release Note ''' | ||
− | {| bgcolor="#F8F8F8" border="1" cellpadding="1" cellspacing="1" width="30%" | + | {| bgcolor="#F8F8F8" border="1" cellpadding="1" cellspacing="1" data-darkreader-inline-bgcolor="" style="--darkreader-inline-bgcolor: #1c1e1f;" width="30%" |
|- | |- | ||
| '''SOM ''' | | '''SOM ''' | ||
Line 16: | Line 16: | ||
'''Change Log''' | '''Change Log''' | ||
− | {| bgcolor="#F8F8F8" border="1" cellpadding="1" cellspacing="1" width="" | + | {| bgcolor="#F8F8F8" border="1" cellpadding="1" cellspacing="1" data-darkreader-inline-bgcolor="" style="--darkreader-inline-bgcolor: #1c1e1f;" width="" |
|- | |- | ||
| '''Item''' | | '''Item''' | ||
Line 28: | Line 28: | ||
| '''1''' | | '''1''' | ||
| Feature | | Feature | ||
− | | | + | | UART<br/> I2C<br/> RTC |
|- | |- | ||
| '''2''' | | '''2''' | ||
Line 35: | Line 35: | ||
|} | |} | ||
− | '''Boot UEFI from SD card'''.<br/> 1.Unzip tarball file | + | <span style="color:#0070c0">'''Single phass step'''</span><br/> <span style="color:#FF0000">'''The full features are available only on this image'''</span><br/> 1.Flash image to SD card |
+ | <pre>$ gunzip woa_rsb3720_w141_sd_downloader_20230907.img.gz | ||
+ | $ sudo dd if=woa_rsb3720_w141_sd_downloader_20230907.img of=/dev/sdX bs=10M; sync | ||
+ | </pre> | ||
+ | |||
+ | 2.Insert this SD card, adjust boot dip switch to boot from SD card (ON-ON-OFF-OFF).<br/> 3.Power on the device and waiting for it flash finished.<br/> 4.Power off the device, adjust boot dip switch to boot from EMMC (OFF-ON-OFF-OFF).<br/> 5.Power on the device, finishing set up process. | ||
+ | |||
+ | <span style="color:#0070c0">'''Dual phass step'''</span><br/> '''Boot UEFI from SD card'''.<br/> 1.Unzip tarball file | ||
<pre>$ gunzip MSOPK_X23-15068_2021_LTSC_21H2_os_installer_EVK_iMX8MP_W141.img.gz | <pre>$ gunzip MSOPK_X23-15068_2021_LTSC_21H2_os_installer_EVK_iMX8MP_W141.img.gz | ||
</pre> | </pre> |
Revision as of 05:59, 8 December 2023
Release Note
SOM | i.MX8MP |
BSP | W 1.4.1 |
Windows | W21H2 |
Change Log
Item |
Change List |
Description |
1 | Feature | UART I2C RTC |
2 | Known Issue | None |
Single phass step
The full features are available only on this image
1.Flash image to SD card
$ gunzip woa_rsb3720_w141_sd_downloader_20230907.img.gz $ sudo dd if=woa_rsb3720_w141_sd_downloader_20230907.img of=/dev/sdX bs=10M; sync
2.Insert this SD card, adjust boot dip switch to boot from SD card (ON-ON-OFF-OFF).
3.Power on the device and waiting for it flash finished.
4.Power off the device, adjust boot dip switch to boot from EMMC (OFF-ON-OFF-OFF).
5.Power on the device, finishing set up process.
Dual phass step
Boot UEFI from SD card.
1.Unzip tarball file
$ gunzip MSOPK_X23-15068_2021_LTSC_21H2_os_installer_EVK_iMX8MP_W141.img.gz
2.Flash image to SD card
$ sudo dd if=MSOPK_X23-15068_2021_LTSC_21H2_os_installer_EVK_iMX8MP_W141.img of=/dev/sdX bs=10M; sync
3. Unzip RSB3720A1AIM20WIV0008.7z (Open command line windows as administrator role)
$ cd RSB3720A1AIM20WIV0008
4. Flash firmware to SD card (e: is SD card driver letter)
$ flash_bootloader.cmd /device MX8M_PLUS_EVK /target_drive e:
5.Insert this SD card, adjust boot dip switch to boot from SD card (ON-ON-OFF-OFF).
6.Power on the device.
Boot UEFI from EMMC.
Flash firmware
1.unzip woa_rsb3720_w14_firmware_downloader.img.gz
$ gunzip woa_rsb3720_w141_firmware_downloader.img.gz
2.flash this image to SD card.
$ sudo dd if=woa_rsb3720_w14_firmware_downloader.img of=/dev/sdX bs=10M; sync
3.Insert this SD card, adjust boot dip switch to boot from SD card (ON-ON-OFF-OFF).
4.Power on the device.
5.Watching the screen, power off the device while it show "Flash bootloader for Winodws 10 IT Enterprise ... Done!".
Install OS
1.Unzip tarball file
$ gunzip MSOPK_X23-15068_2021_LTSC_21H2_os_installer_EVK_iMX8MP_W141.img.gz
2.Flash image to SD card
$ sudo dd if=MSOPK_X23-15068_2021_LTSC_21H2_os_installer_EVK_iMX8MP_W141.img of=/dev/sdX bs=10M; sync
3.Insert this SD card, adjust boot dip switch to boot from EMMC (OFF-ON-OFF-OFF).
4.Power on the device, installing the Win10 OS following the system instruction.