Difference between revisions of "RSB-3730 user guide"
From ESS-WIKI
Xingxing.li (talk | contribs) (→BSP/Linux編譯) |
|||
| Line 19: | Line 19: | ||
=== '''產品官網鏈結（Product official website link）''' === | === '''產品官網鏈結（Product official website link）''' === | ||
| − | [https://www.advantech.com/en/products/5912096e-f242-4b17-993a-1acdcaada6f6/rsb-3730/mod_5d7887e6-b7e3-427c-8729-b81ac7d89ccd RSB-3730 | + | [https://www.advantech.com/en/products/5912096e-f242-4b17-993a-1acdcaada6f6/rsb-3730/mod_5d7887e6-b7e3-427c-8729-b81ac7d89ccd '''RSB-3730 '''] |
| − | |||
| − | | ||
== '''硬件接口說明（Hardware interface description）''' == | == '''硬件接口說明（Hardware interface description）''' == | ||
| Line 127: | Line 125: | ||
=== '''系統下載（OS Dowload）''' === | === '''系統下載（OS Dowload）''' === | ||
| − | + | *'''''Linux系统 (Linux OS) ''''' | |
| − | | + | [http://ess-wiki.advantech.com.tw/view/RRSB-3730_Release_Note Yocto 3.0] |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
=== '''系统更新方法（System update method）''' === | === '''系统更新方法（System update method）''' === | ||
| Line 251: | Line 190: | ||
=== [[RSB-3730_UIO_Test|'''UIO Test''']] === | === [[RSB-3730_UIO_Test|'''UIO Test''']] === | ||
| − | |||
== '''BSP/Linux編譯''' == | == '''BSP/Linux編譯''' == | ||
=== '''[[Yocto_Linux_BSP_Ver.A_User_Guide_for_RSB-3730_series_-Yocto_3.0|Yocto Linux BSP Ver.A User Guide for RSB-3730 series -Yocto 3.0]]''' === | === '''[[Yocto_Linux_BSP_Ver.A_User_Guide_for_RSB-3730_series_-Yocto_3.0|Yocto Linux BSP Ver.A User Guide for RSB-3730 series -Yocto 3.0]]''' === | ||
Revision as of 08:33, 21 December 2023
Contents
產品介绍（Product Presentation）
產品特性(Product Features)
- NXP i.MX 8M PLUS 4xA53@1.8GHz
- Integrate 2.3 TOPS NPU and extend 8-26 TOPS AI card
- 4kP30,1080p60 HEVC, H.264, VP9, VP8 decoding
- 1080p60 H.265, H.264 encoding
- 1xHDMI2.0
- 5xGbE LAN, 1xGbE Fiber
- USB3.0,USB2.0,RS232,RS485,CAN FD,SATA,SD
- 8 Channels Mic Array
- Support AI card/5G/4G/GPS/ Wi-Fi 5/Wi-Fi6/BT
- Support TPM,TCM
- Linux and, Andriod
- Embeded DeviceOn, DeviceOn.CommBridge
產品官網鏈結（Product official website link）
硬件接口說明（Hardware interface description）
接口布局圖 Board Layout
接口尺寸 Board Dimension
Jumper List
| Jumper list | |
| VDD | VDD 3.3V &5V LVDS VDD & Backlight power level select |
| BLP1 | LVDS Backlight power 12V select |
| SW1 | AT &ATX Mode select and boot mode select |
| BTN | Power Button |
Connector List
| COM1/DEBUG2 | Debug CONN |
| BAT | RTC CONN |
| M.2 | M.2 CONN |
| LINE OUT | LINE OUT CONN |
| MIC IN | MIC IN CONN |
| UIO1 | UIO1 |
| UIO2 | UIO2 |
| LVDS | LVDS CONN |
| SD | SD slot |
| SIM | SIM slot |
| OTG | OTG |
| DCIN | DC-IN JACK |
| USB1 | USB CONN |
| HDMI | HDMI CONN |
| COM | COM CONN |
| RST | RST CONN |
| LED | LED |
| Mini PCIE | Mini PCIE CONN |
| LAN1 | RJ45 LAN |
快速入門（Quick Start）
系統下載（OS Dowload）
- Linux系统 (Linux OS)
系统更新方法（System update method）
Device Routes：
eMMC：/dev/mmcblk2
SD: /dev/mmcblk1
QSPI: /dev/mtd0
For example：SD test
# dd if=/dev/urandom of=data bs=1 count=1024 # dd if=/dev/mmcblk1 of=backup bs=1 count=1024 skip=4096 # dd if=data of=/dev/mmcblk1 bs=1 seek=4096 # dd if=/dev/mmcblk1 of=data1 bs=1 count=1024 skip=4096 # diff data data1 # dd if=backup of=/dev/mmcblk1 bs=1 seek=4096
Install the System from SD Card
1. Copy imx-image-full-imx8mmrsb3730a2-xxxxxx.rootfs.sdcard package to your desk- top. use ubuntu OS.
2. Insert SD card to PC.
3. Make a bootable SD card. For example, the node of an SD card is /dev/sdv.
# umount /dev/sdv* # dd if=./imx-image-full-imx8mmrsb3730a2-xxxx.rootfs.sdcard \ of=/dev/sdv bs=1M # sync
4. Insert SD card and copy imx-image-full-imx8mmrsb3730a1-xxxxxx.rootfs.sdcard to USB disk.
5. Insert USB disk and SD card then boot the whole system from SD card by changing SW1 to 1-2 ON.
6. Enter usb disk folder, make a bootable emmc.
# cd /run/media/sda1/ # umount /dev/mmcblk2* # dd if=./imx-image-full-imx8mmrsb3730a2-xxxx.rootfs.sdcard \ of=/dev/mmcblk2 bs=1M # sync