Difference between revisions of "HBW test/test"
From ESS-WIKI
| Line 3: | Line 3: | ||
== Prerequisites == | == Prerequisites == | ||
| + | * PTN3460 Programming Guide | ||
=== On Host PC === | === On Host PC === | ||
* LVDS panel's EDID config (128 bytes) | * LVDS panel's EDID config (128 bytes) | ||
* (optional) one utility to edit EDID config | * (optional) one utility to edit EDID config | ||
| − | |||
=== On RSB-3810 (Ubuntu) === | === On RSB-3810 (Ubuntu) === | ||
* i2c-tools installed | * i2c-tools installed | ||
| Line 13: | Line 13: | ||
sudo apt install i2c-tools | sudo apt install i2c-tools | ||
</syntaxhighlight> | </syntaxhighlight> | ||
| + | use EDID 6 as example below | ||
| − | == Convert EDID config to | + | == Convert EDID config to shell script == |
| + | === On RSB-3810 (Ubuntu) === | ||
<syntaxhighlight lang="bash"> | <syntaxhighlight lang="bash"> | ||
EDIDNEW=6 # set EDID | EDIDNEW=6 # set EDID | ||
| Line 45: | Line 47: | ||
</syntaxhighlight> | </syntaxhighlight> | ||
| − | + | run the script and reboot | |
<syntaxhighlight lang="bash"> | <syntaxhighlight lang="bash"> | ||
sudo ./$SCRIPT | sudo ./$SCRIPT | ||
| Line 51: | Line 53: | ||
</syntaxhighlight> | </syntaxhighlight> | ||
| − | == | + | == config u-boot env to ebable LVDS display == |
| − | |||
| − | |||
| − | |||
| − | |||
| − | + | === On RSB-3810 (U-Boot) === | |
| − | + | Press any key to stop auto boot | |
| − | + | set DISPLAY to the new edid's dtbo (EDID 6 as example below) | |
| − | |||
| − | |||
| − | == | ||
| − | ( | ||
| − | |||
* Multi-display (HDMI + LVDS) | * Multi-display (HDMI + LVDS) | ||
: The LVDS is always major display that has nothing to do with the specified order. | : The LVDS is always major display that has nothing to do with the specified order. | ||
Revision as of 08:27, 2 January 2024
Prerequisites
- PTN3460 Programming Guide
On Host PC
- LVDS panel's EDID config (128 bytes)
- (optional) one utility to edit EDID config
On RSB-3810 (Ubuntu)
- i2c-tools installed
sudo apt update
sudo apt install i2c-tools
use EDID 6 as example below
Convert EDID config to shell script
On RSB-3810 (Ubuntu)
EDIDNEW=6 # set EDID
EDIDBIN=g070vw01v0.bin
SCRIPT=set_new_edid.sh
REG81=`printf "0x%02x" 0` # Please refer to the PTN3460 Programming Guide to set correct value
REG84=`printf "0x%02x" $((2*EDIDNEW + 1))`
REG85=`printf "0x%02x" $EDIDNEW`
cat << EOT > $SCRIPT
#!/bin/bash
i2cset -f -y 2 0x20 0x85 $REG85 b
$(
xxd -c 16 -ps $EDIDBIN |
sed "s/../0x& /g; s/ *$//" |
for ADDR in `seq 0x00 0x10 0x70`; do
read
echo i2cset -f -y 2 0x20 `printf "0x%02x" $ADDR` $REPLY i
done
)
i2cset -f -y 2 0x20 0x81 $REG81 b
i2cset -f -y 2 0x20 0x84 $REG84 b
i2cset -f -y 2 0x20 0xe8 0x01 0x78 0x45 0x56 i
EOT
chmod +x $SCRIPT
run the script and reboot
sudo ./$SCRIPT
sudo reboot
config u-boot env to ebable LVDS display
On RSB-3810 (U-Boot)
Press any key to stop auto boot set DISPLAY to the new edid's dtbo (EDID 6 as example below)
- Multi-display (HDMI + LVDS)
- The LVDS is always major display that has nothing to do with the specified order.
setenv list_dbto "gpu-mali.dtbo video.dtbo apusys.dtbo hdmi.dtbo lvds6.dtbo"
saveenv
reset
- LVDS only
setenv list_dbto "gpu-mali.dtbo video.dtbo apusys.dtbo lvds6.dtbo"
saveenv
reset