Difference between revisions of "ROM-6881 How to configurate Static IP"
From ESS-WIKI
Xingxing.li (talk | contribs) |
Xingxing.li (talk | contribs) |
||
| Line 2: | Line 2: | ||
== Ethernet == | == Ethernet == | ||
| − | ROM-6881 supports two Ethernet ports : eth0/eth1. Both ports are using “DHCP”mode by default. The following configurations and tests are taking eth0 for example. | + | ROM-6881 supports two Ethernet ports : eth0/eth1. Both ports are using “DHCP”mode by default. The following configurations and tests are taking eth0 for example. |
| − | # The LAN signal of the core board ROM-6881 is connected to the SOM-DB2510 interface of the mainboard as LAN0 LAN1. | + | #The LAN signal of the core board ROM-6881 is connected to the SOM-DB2510 interface of the mainboard as LAN0 LAN1. |
== Configure to Static IP == | == Configure to Static IP == | ||
| Line 10: | Line 10: | ||
1. Click “Applications” -> “Settings” -> “Advanced Network Configration”. | 1. Click “Applications” -> “Settings” -> “Advanced Network Configration”. | ||
| − | + | [[File:ROM-6881 Eethernet.png|500x300px]] | |
| − | + | 2. Double-click “Wired Connection 1” to configure it. | |
| − | + | [[File:ROM-6881 Ethernet wired connection.png|500x300px]] | |
| − | + | == Configure to DHCP == | |
| − | + | | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
Revision as of 03:23, 5 January 2024
Ethernet
ROM-6881 supports two Ethernet ports : eth0/eth1. Both ports are using “DHCP”mode by default. The following configurations and tests are taking eth0 for example.
- The LAN signal of the core board ROM-6881 is connected to the SOM-DB2510 interface of the mainboard as LAN0 LAN1.
Configure to Static IP
1. Click “Applications” -> “Settings” -> “Advanced Network Configration”.
2. Double-click “Wired Connection 1” to configure it.
Configure to DHCP