Difference between revisions of "RSB-3730 Display Setting"
From ESS-WIKI
Xingxing.li (talk | contribs) |
Xingxing.li (talk | contribs) |
||
Line 17: | Line 17: | ||
720x480 60 720 736 798 858 480 489 495 525 27000 flags: nhsync, nvsync; type: driver props: | 720x480 60 720 736 798 858 480 489 495 525 27000 flags: nhsync, nvsync; type: driver props: | ||
</pre> | </pre> | ||
− | |||
=== '''LVDS-Panel''' === | === '''LVDS-Panel''' === |
Revision as of 09:30, 3 July 2024
HDMI
When the HDMI Cable is connected, the default resolution from edid will be displayed on the screen.
# modetest -c
id encoder status name size (mm) modes encoders 46 45 connector HDMI-A-1 510x290 8 45 modes: name refresh (Hz) hdisp hss hse htot vdisp vss vse vtot) 1920x1080 60 1920 2008 2052 2200 1080 1084 1089 1125 148500 flags: phsync, pvsync; type: pre- ferred, driver 1920x1080 50 1920 2448 2492 2640 1080 1084 1089 1125 148500 flags: phsync, pvsync; type: driver 1280x720 60 1280 1390 1430 1650 720 725 730 750 74250 flags: phsync, pvsync; type: driver 1280x720 50 1280 1720 1760 1980 720 725 730 750 74250 flags: phsync, pvsync; type: driver 1440x576 50 1440 1464 1592 1728 576 581 586 625 54000 flags: nhsync, nvsync; type: driver 1440x480 60 1440 1472 1596 1716 480 489 495 525 54000 flags: nhsync, nvsync; type: driver 720x576 50 720 732 796 864 576 581 586 625 27000 flags: nhsync, nvsync; type: driver 720x480 60 720 736 798 858 480 489 495 525 27000 flags: nhsync, nvsync; type: driver props:
LVDS-Panel
Press enter after boot, system will stop at u-boot as below, issue the commend in red and press enter.
Set the resolution to 800x480 (Ex: G070VW01.0(97D07G01.012) panel)
=> setenv fdtfile imx8mm-rsb3730-a2-dsi2lvds-800x480.dtb => saveenv => boot
Set the resolution to 1920x1080 (Ex: G215HV01 panel)
=> setenv fdtfile imx8mm-rsb3730-a2-dsi2lvds-1920x1080.dtb => saveenv => boot
MIPI dis-Panel:G101UAN02.0
=> setenv fdtfile imx8mm-rsb3730-a2-dsi-auog101uan02.dtb => saveenv => boot
Note:请注意Panel的电平