Difference between revisions of "ASR-A501 CAN/DEBUG"
From ESS-WIKI
Xingxing.li (talk | contribs) |
Xingxing.li (talk | contribs) |
||
| Line 1: | Line 1: | ||
| + | |||
| + | === '''Hardware pin definition：''' === | ||
[[File:ASR-A501 can debug.png|RTENOTITLE]] | [[File:ASR-A501 can debug.png|RTENOTITLE]] | ||
| Line 21: | Line 23: | ||
=== '''CAN（2 * CAN FD（5M））''' === | === '''CAN（2 * CAN FD（5M））''' === | ||
| − | |||
| − | |||
| − | |||
| − | |||
| | ||
Revision as of 09:22, 19 May 2025
Contents
Hardware pin definition：
DEBUG Port Connection：
1. Connect the debug port cable (1700035538-01) to the Debug port on ASRA501.
2. Connect it to your PC using the USB to RS-232 Cable.
Debug Port Settings：
ASR-A501 can communicate with a host server using serial cables. Common serial communication programs such as HyperTerminal, Tera Term, or PuTTY can be used in these applications. The example below describes the serial terminal setup using HyperTerminal on a Windows host:
1. Connect ASR-A501 with your PC using a serial cable.
2. Open HyperTerminal on your Windows PC, and select the settings demonstrated in the photo below.
3. Insert power adapter to DC jack and power up the board. The Debug console log will be displayed on the terminal screen.
CAN（2 * CAN FD（5M））