Difference between revisions of "AOM-DB3500 Display"
From ESS-WIKI
Xingxing.li (talk | contribs) |
Xingxing.li (talk | contribs) |
||
| Line 5: | Line 5: | ||
[[File:ROM-6881 HDMI DP screen.png.jpg|RTENOTITLE]] | [[File:ROM-6881 HDMI DP screen.png.jpg|RTENOTITLE]] | ||
| + | |||
== '''HW Setting：''' == | == '''HW Setting：''' == | ||
| Line 33: | Line 34: | ||
'''[[File:AOM-DB3500 J15.png|700x500px|AOM-DB3500 J15.png]]''' | '''[[File:AOM-DB3500 J15.png|700x500px|AOM-DB3500 J15.png]]''' | ||
| + | |||
| + | | ||
{| border="1" cellpadding="1" cellspacing="1" style="width: 500px;" | {| border="1" cellpadding="1" cellspacing="1" style="width: 500px;" | ||
| Line 49: | Line 52: | ||
[[File:AOM-DB3500 J16.png|700x500px|AOM-DB3500 J16.png]] | [[File:AOM-DB3500 J16.png|700x500px|AOM-DB3500 J16.png]] | ||
| + | |||
| + | | ||
{| border="1" cellpadding="1" cellspacing="1" style="width: 500px;" | {| border="1" cellpadding="1" cellspacing="1" style="width: 500px;" | ||
Revision as of 09:03, 25 November 2025
Contents
Configure Resolution for HDMI/DP screen
1. Click “Applications” -> “Settings”->“Display”.
2. Choose “HDMI-1”or “DP-1”, then choose “Resolution”.
3. Click “Apply”.
HW Setting：
| J15：EDP VDD Power Select | |
| Pin | Function |
| 3-5 | +V3.3（Default） |
| 1-3 | +V5 |
| 3-4 | +V12 |
| Other |
No Function Do Note Use |
| J16：EDP Backlight Power Select | |
| Pin | Function |
| 1-2 | +V5 |
| 3-4 | +V12（Default） |
| J12：EDP Hot-Plug Detect Select | |
| Pin | Function |
| 1-2 | LVDS & DSI |
| 2-3 | EDP0_HPD（Default） |
SW setting：
Multi-Display
AOM-3821 supports three kinds of displays — HDMI, eDP, DP
1.DP physical interface is Type-C
2.DP is always open and cannot be closed
| Support EDP Panel | |
| Panel Model | B156XTN07.1 |
Dual-Display
"HDMI + DP” is the default configuration.
- HDMI + DP
# fw_setenv display0 hdmi0-default # fw_setenv display1 # fw_setenv display2 # fw_setenv display3 # reboot
- eDP + DP
# fw_setenv display0 # fw_setenv display1 edp1-1366x768 # fw_setenv display2 # fw_setenv display3 # reboot
Triple-Display
- HDMI + eDP + DP
# fw_setenv display0 hdmi0-default # fw_setenv display1 edp1-1366x768 # fw_setenv display2 # fw_setenv display3 # reboot