Difference between revisions of "IoTGateway/BSP/Android/BinaryImage"

Revision as of 03:56, 3 February 2017

Android Image Downloads

Flashing

${BOARD} : target board name (list below)

rsb_4410 / rom_3420 / rom_5420 / rom_7420 / ubc_ds31 / ubc_200 / rsb_6410

${BSPHOME} : the directory that BSP tarball extacted to

${SD_DEVICE} : device name of SD card in Ubuntu (e.g. /dev/sdf)

${MMC_DEVICE} : device name of on-board eMMC in Android (e.g. /dev/block/mmcblk0)

debug console / serial console

serial terminal program (e.g. minicom, putty, teraterm ...) that serial port is configured to 115200 8N1

terminal console

terminal program (e.g. gnome-terminal, xfce4-terminal ...)

Perform the following command in terminal console

$ cd ${BSPHOME}/scripts

$ ./mksd-android.sh ${SD_DEVICE}

Boot up from SD card

Perform the following commands in debug console

# cd /data/mkimage/scripts

# sh ./mksd-android.sh ${MMC_DEVICE}

Remove SD card, then target board can boot up from onboard eMMC.

Release Note

@@ Line 7: / Line 7: @@
 <br/><span style="font-size: medium;"><span style="color: rgb(0, 175, 240);">Flashing</span></span>
-<span style="font-size: medium;"><span style="color: rgb(0, 175, 240);"></span></span>
 <span style="color: rgb(128, 0, 128);">'''${BOARD}'''</span>&nbsp;: target board name (list below)
@@ Line 26: / Line 26: @@
 :terminal program (e.g. gnome-terminal, xfce4-terminal ...)
-<span style="font-size: medium;"><span style="color: rgb(0, 175, 240);"></span></span><span style="font-size: medium;"><span style="color: rgb(0, 175, 240);"></span></span>
 === <span id="to_create_a_bootable_sd_card" class="mw-headline"><span style="color: rgb(0, 102, 204);">To create a bootable SD card</span></span> ===
@@ Line 40: / Line 42: @@
 ::<code># sh ./mksd-android.sh <span style="color: rgb(128, 0, 128);">'''${MMC_DEVICE}'''</span></code>
 :Remove SD card, then target board can boot up from onboard eMMC.
-<span style="font-size: medium;"><span style="color: rgb(0, 175, 240);"></span></span>