Revision as of 04:10, 26 February 2016

Abstract

The main way WSN API SDK can be extended is to add new "NET" modules into its palette. Customer can follow the general C API, structure, command, event and define ( called "NAL" layer Interface ) to add its own "NET" modules (ex: zigbee, bluetooth... ).

Definition

MAX_SN_INF_NAME       16  // Max size of Interface's Name
MAX_SN_INF_ID         64  // Max size of Interface's Unique ID
MAX_SN_INF_NUM         8  // Max supports interface number
MAX_SN_COM_NAME       32  // Max size of Communication(Net) Type Name
MAX_SN_UID            64  // Max size of SenHub Unique ID
MAX_SN_HOSTNAME       32  // Max size of SenHub Name
MAX_SN_SNO            32  // Max size of SenHub's Serial Number
MAX_SN_PRODUCT_NAME   32  // Max size of SenHub's Product Name

typedef enum {
        // Interface: 1000 ~ 1999
        SN_Inf_UpdateInterface_Data      = 1000,  // Update Interface data from Sensor Network Library  
        SN_Inf_SendInfoSpec              = 1001,  // Update Interface InfoSpec (Capability)	 
        // Sensor Node: 2000 ~ 2999
        SN_SenHub_Register               = 2000,  // Sensor Hub Register
        SN_SenHub_SendInfoSpec           = 2001,  // Update Sensor Hub InfoSpec (Capability)
        SN_SenHub_AutoReportData         = 2002,  // Update Sensor Hub data
        SN_SenHub_Disconnect             = 2003,  // Sensor Hub disconnect
        SN_SetResult                     = 3000,	 
 }SN_EVENT_ID;

typedef enum {
        SN_Set_ReportSNManagerDataCbf  = 3000,
        // Get / Set
        SN_Inf_Get                     = 6000,
        SN_Inf_Set                     = 6001,
        SN_SenHub_Get                  = 6020,
        SN_SenHub_Set                  = 6021,
 }SN_CTL_ID;

typedef enum {
       SN_ER_NOT_IMPLEMENT             =  -13,   /*	Does Not Support this command (501)       */
       SN_ER_TIMEOUT                   =  -12,   /*	Request Timeout	(408)                     */
       SN_ER_SYS_BUSY                  =  -11,   /*	System is busy (503)                      */
       SN_ER_VALUE_OUT_OF_RNAGE        =  -10,   /*	Value is out of range (416)               */
       SN_ER_SYNTAX_ERROR              =   -9,   /*	Format is correct but syntax error (422)  */
       SN_ER_FORMAT_ERROR              =   -8,   /*	Format error (415)                        */
       SN_ER_REQUEST_ERROR             =   -7,   /*	Request error (400)                       */
       SN_ER_RESOURCE_LOSE             =   -6,   /*	SenHub disconnect (410)                   */
       SN_ER_RESOURCE_LOCKED           =   -5,   /* 	Resource is in setting (426)              */
       SN_ER_NOT_FOUND                 =   -4,   /*	Resource Not Found (404)                  */
       SN_ER_WRITE_ONLY                =   -3,   /*	Read Only (405)                           */
       SN_ER_READ_ONLY                 =   -2,   /*	Write Only (405)                          */
       SN_ER_FAILED                    =   -1,   /*	Failed (500)                              */
       SN_OK                           =    0,   /*	Success	(200)                             */
       SN_INITILIZED                   =    1,   /*	Library had initilized                    */
 } SN_CODE;