Difference between revisions of "WISE-1530 RF Continue Tx Manual"
From ESS-WIKI
Erick.huang (talk | contribs) |
Erick.huang (talk | contribs) |
||
| Line 38: | Line 38: | ||
'''Step01: '''Use 'join' to Connect to AP | '''Step01: '''Use 'join' to Connect to AP | ||
| − | join <ssid> <open|wpa_aes|wpa_tkip|wpa2|wpa2_tkip|wpa2_aes|wep> [key] [channel] [ip netmask gateway] | + | join <ssid> <open|wpa_aes|wpa_tkip|wpa2|wpa2_tkip|wpa2_aes|wep> [key] [channel] [ip netmask gateway]<span style="background-color:#A9A9A9;"></span> |
| − | Ex: join join RT66 wpa2_aes 987135238 | + | <span style="background-color:#E6E6FA;">Ex: join join RT66 wpa2_aes 987135238</span> |
[[Category:Editor]] | [[Category:Editor]] | ||
Revision as of 02:44, 19 July 2017
Preparing for Hardware
The user needs to prepare for hardware as following:
- WISE-1530, WISE-1500 and WISE-ED22.
- 802.11b/g/n (2.4 GHz) Wireless Access Point (AP).
- PC running the Microsoft® Windows® 7 operating systems
Please refer to the following steps for setup a WISE-1530 boards.
Step01: Please prepare boards as below.
① WISE-1530
② WISE-1500
③ Power connector
④ Reset button
⑤ UART connector
⑥ RF connector
Step02: Connect the WISE-1530 to PC via USB-to-UART cable.
- Install USB-to-UART driver.
- The device will be visible in the Device Manager as below, user can use serial port tools (putty, tera term ...etc.).
RF Test
You can see " Console app start, type 'help' " on console screen, after power on.
Step01: Use 'join' to Connect to AP
join <ssid> <open|wpa_aes|wpa_tkip|wpa2|wpa2_tkip|wpa2_aes|wep> [key] [channel] [ip netmask gateway]
Ex: join join RT66 wpa2_aes 987135238