Difference between revisions of "WISE-1530 RF Continue Tx Manual"
Erick.huang (talk | contribs) |
Erick.huang (talk | contribs) |
||
| Line 32: | Line 32: | ||
[[File:WISE-1530 uart2.png|640x464px|WISE-1530 uart2.png]] | [[File:WISE-1530 uart2.png|640x464px|WISE-1530 uart2.png]] | ||
| − | = RF Test | + | = RF Test Command = |
You can see " Console app start, type 'help' " on console screen, after power on. | You can see " Console app start, type 'help' " on console screen, after power on. | ||
| − | ''' | + | '''Join: '''Connect to AP |
join <ssid> <open|wpa_aes|wpa_tkip|wpa2|wpa2_tkip|wpa2_aes|wep> [key] [channel] [ip netmask gateway] | join <ssid> <open|wpa_aes|wpa_tkip|wpa2|wpa2_tkip|wpa2_aes|wep> [key] [channel] [ip netmask gateway] | ||
| Line 42: | Line 42: | ||
<span style="background-color:#D3D3D3;">Ex: join join RT66 wpa2_aes 987135238</span> | <span style="background-color:#D3D3D3;">Ex: join join RT66 wpa2_aes 987135238</span> | ||
| − | <span style="background-color:# | + | <span style="background-color:#D3D3D3;"></span>'''Ping: ''' |
| − | iperf [-s|-c host ip] [options] | + | ping <destination> [-i <interval in ms>] [-n <number>] [-l <length>] |
| + | |||
| + | <span style="background-color:#D3D3D3;">Ex: ping 192.168.1.1 -i 10 -n 10</span> | ||
| + | |||
| + | '''Iperf: '''Test Tx | ||
| + | |||
| + | iperf [-s|-c host ip] [options] | ||
-u: use UDP mode | -u: use UDP mode | ||
| Line 50: | Line 56: | ||
-t: time(second) | -t: time(second) | ||
| − | <span style="background-color:#D3D3D3;">Ex. as client: iperf -c 192.168. | + | <span style="background-color:#D3D3D3;">Ex. as client: iperf -c 192.168.1.1 -u -t 30</span> |
[[Category:Editor]] | [[Category:Editor]] | ||
Revision as of 03:37, 19 July 2017
Preparing for Hardware
The user needs to prepare for hardware as following:
- WISE-1530, WISE-1500 and WISE-ED22.
- 802.11b/g/n (2.4 GHz) Wireless Access Point (AP).
- PC running the Microsoft® Windows® 7 operating systems
Please refer to the following steps for setup a WISE-1530 boards.
Step01: Please prepare boards as below.
① WISE-1530
② WISE-1500
③ Power connector
④ Reset button
⑤ UART connector
⑥ RF connector
Step02: Connect the WISE-1530 to PC via USB-to-UART cable.
- Install USB-to-UART driver.
- The device will be visible in the Device Manager as below, user can use serial port tools (putty, tera term ...etc.).
RF Test Command
You can see " Console app start, type 'help' " on console screen, after power on.
Join: Connect to AP
join <ssid> <open|wpa_aes|wpa_tkip|wpa2|wpa2_tkip|wpa2_aes|wep> [key] [channel] [ip netmask gateway]
Ex: join join RT66 wpa2_aes 987135238
Ping:
ping <destination> [-i <interval in ms>] [-n <number>] [-l <length>]
Ex: ping 192.168.1.1 -i 10 -n 10
Iperf: Test Tx
iperf [-s|-c host ip] [options]
-u: use UDP mode
-t: time(second)
Ex. as client: iperf -c 192.168.1.1 -u -t 30