Difference between revisions of "IoTGateway/AWS/Greengrass"

Revision as of 12:02, 5 September 2017

This article is written based on AWS (Amazon Web Services) Greengrass 1.0.0, and the target device is Advantech RSB-4760 (Qualcomm APQ8016 platform).

Set Up Environment

This section is referred to the AWS Greengrass document and AWS CLI document.

Debian 9 (Stretch)

1. Add ggc_user and ggc_group using the following commands:

sudo useradd ggc_user
sudo groupadd ggc_group

2. Install missing dependencies using the following commands:

sudo apt-get update
sudo apt-get install sqlite3

3. Set up cgroups

wget https://raw.githubusercontent.com/tianon/cgroupfs-mount/master/cgroupfs-mount
chmod 777 cgroupfs-mount
sudo bash ./cgroupfs-mount

4. Install Pip

curl -O https://bootstrap.pypa.io/get-pip.py
python get-pip.py --user  

# Add an export command to your profile script, e.g. ~/.profile
export PATH=~/.local/bin:$PATH

# Load the profile into your current session
source ~/.profile

# Verify that pip is installed correctly
pip --version

5. Installing the AWS CLI with Pip

pip install awscli --upgrade --user

# Verify that the AWS CLI installed correctly
aws --version

Set Up AWS Greengrass

This section is referred to this AWS Greengrass document.

Download the AWS Greengrass Core Software

Sign in to the AWS Management Console and navigate to the AWS IoT console. Then, download the AWS Greengrass Core Software from Software page.

Copy the tar file into target device, and use the following command to extract the tar file:

sudo tar -zxvf greengrass-platform-version.tar.gz -C /

Where platform is either:

• linux-armv7l
• linux-x86-64
• linux-aarch64

PS: You are also able to download this AWS Greengrass core software in the next step.

Create an AWS Greengrass Group

Open the AWS IoT console and, in the navigation pane, choose Greengrass. On the Define a Greengrass group tile, choose Get Started. 

On the Set up your Greengrass Group page, choose Use easy creation, and then follow the instructions. Finally, you can see the page as below.

Download the public/private key pairs & certificate, and keep them safe. When the download has completed choose Finish.

Install certificates on your Core device

1. Download the AWS IoT root CA certificate from Verisign.

2. Copy the Core's private key, certificate, and the AWS IoT root CA certificate into the /greengrass/configuration/certs directory of your device using the following names:

• cloud.pem.crt

The Core certificate downloaded from the console,e.g. ce69fc71e9.cert.pem.

• cloud.pem.key

The private key downloaded from the console, e.g. ce69fc71e9.private.key.

• root-ca.pem

The AWS IoT root CA certificate from Symantec.

Create an AWS Greengrass Core Device in the Cloud

Provisioning an AWS Greengrass Core

Get Connected to AWS