MIO-2361 Yocto 3.0_1.0.0000 BSP Release Notes
From ESS-WIKI
Revision as of 10:16, 3 May 2021 by Winston.huang (talk | contribs)
Introduction
This BSP is based on Yocto 3.0 ("Zeus") and Intel Yocto BSP 6.0 (Intel-corei7-64).
Major packages version list:
| Package | Version |
| Linux Kernel | 5.4.8 |
| Systemd | 243.2 |
| Chromium | 79.0.3945 |
| Docker-ce | 19.03.2 |
| SUSI | 4.2.16327 |
| Qt5 | 5.13.2 |
| Qt5 Creator | 4.9.2 |
Quick Start Guide
Please see x86 Yocto BSP Quick Start Guide
Docker image for Build Environment
Please see Build docker image
How to create installer USB
Please see Create Bootable Device
Revision History
| Revision | Date | Description |
| 1.0.0000 | 2021-04-26 | Initial Version |
Known issues
| Subject | Work Around |
| If a HDD/USB with previously installed BSP is also connected to target, the bootloader on Live media may load a rootfs from this HDD/USB instead of its own rootfs image. In this case the installation will fail. | |
| root user playback video file via VLC media player will pop "Audio output failed" | |
| Hardware acceleration can not enable while playback video on Youtube via Chromium | |
| No sound output while playback video on Youtube via Chromium | |
| No correct audio output device can be selected while use adv user to playback video file via VLC media player | |
| All COM port was config as debug port | Use below command to disable debug function# for N in 0 1 2; do systemctl disable serial-getty@ttyS$N; done # sed -i "s/console=ttyS0\S* //" /boot/loader/entries/boot.conf # reboot |