Windows IoT Enterprise

BSP Version

Windows : W21H2 (19044.1288.211006-0501.21h2_release_svc_refresh_CLIENT_ENTERPRISES_OEM_A64FRE_en-us.iso)

NXP BSP :
W1.0.0 → ROM-5720
W1.1.0 → RSB-3720

Released Image

• OS_Support_List_Windows_On_Arm

Build Environment on Host

Currently, we adopt Docker as build environment.

You can get the latest version of advrisc/u18.04-imx8lbv1 Docker image for developing nVidia jetson projects.

Docker command:

$ docker pull advrisc/u18.04-imx8lbv1:latest

Run Docker example

Step1 Run docker container (example)

$ docker run -it --name <CONTAINER_NAME> -v <BSP_PATH>:/home/adv/BSP:rw advrisc/u18.04-imx8lbv1:latest /bin/bash

Step2 In container, change the user. (example)

 adv@7cc0fa834366:~$ sudo chown adv:adv -R BSP

Getting Linux Source Code

PLEASE DOWNLOAD SOURCE CODE IN THE DOCKER (both download code and build code are the same user.)
NXP_BSP_W1.0.0

$ cd ~/BSP
$ mkdir jetson_linux_risc
$ cd jetson_linux_risc
$ git config --global user.name "Your Name"
$ git config --global user.email you@example.com
$ repo init -u https://AIM-Linux@dev.azure.com/AIM-Linux/ms-iot-ent/_git/NXP_BSP_W1.0.0
$ repo sync

NXP_BSP_W1.1.0

$ repo init -u https://AIM-Linux@dev.azure.com/AIM-Linux/ms-iot-ent/_git/NXP_BSP_W1.1.0

Setting up build environment

Install Dependency Packages

$ sudo apt-get update
$ sudo apt-get upgrade -y

$ sudo apt install gnupg ca-certificates
$ sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv-keys 3FA7E0328081BFF6A14DA29AA6A19B38D3D831EF
$ echo "deb https://download.mono-project.com/repo/ubuntu stable-bionic main" | sudo tee /etc/apt/sources.list.d/mono-official-stable.list
$ sudo apt update

$ sudo apt-get install attr build-essential python3.8 python3.8-dev python3.8-venv device-tree-compiler bison flex swig iasl uuid-dev wget git bc libssl-dev zlib1g-dev python3-pip mono-devel gawk -y

Set up UEFI

$ pushd mu_platform_nxp
$ pip3 install -r requirements.txt --upgrade
$ pip3 install pycryptodome
$ pip3 install pyelftools
$ python3 NXP/${uefi_folder}/PlatformBuild.py --setup
$ python3 NXP/${uefi_folder}/PlatformBuild.py --update
$ popd

Download the Arm64 cross-compiler.

$ pushd ~
$ wget https://releases.linaro.org/components/toolchain/binaries/7.4-2019.02/aarch64-linux-gnu
/gcc-linaro-7.4.1-2019.02-x86_64_aarch64-linux-gnu.tar.xz
$ tar xf gcc-linaro-7.4.1-2019.02-x86_64_aarch64-linux-gnu.tar.xz
$ rm gcc-linaro-7.4.1-2019.02-x86_64_aarch64-linux-gnu.tar.xz
$ popd

The cross compiler prefix is required to be exported later into AARCH64_TOOLCHAIN_PATH variable.

export AARCH64_TOOLCHAIN_PATH=~/gcc-linaro-7.4.1-2019.02-x86_64_aarch64-linux-gnu/bin/aarch64-linux-gnu 

Building

ROM-5720

$ cd ~/<BSP>/
$ source ~/venv/win_fw_build/bin/activate
$ export AARCH64_TOOLCHAIN_PATH=~/gcc-linaro-7.4.1-2019.02-x86_64_aarch64-linux-gnu/bin/aarch64-linux-gnu-
$ ./adv-buildme64.sh -b 5720 -t all -c -fw

RSB-3720

$ cd ~/<BSP>/
$ ./adv-buildme64.sh -b 3720 -t all -c -fw

The firmware will be generated in the

~/<BSP>/imx-windows-iot/BSP/firmware/<PRODUCT>/firmware.bin

Flash

Please do WIN OS INSTALLER first then do firmware flash later if you would like to boot the system from SD card

RSB-3720 ROM-5722

OS Installer

$ sudo dd if=XXX_os_installer_${EVK_BOARD_NAME}.img of=/dev/sdX bs=10M; sync

(Where X is disk drive in system)

Firmware
The RSB-3720 support OS boot from SD card ONLY
1).Unzip firmware image
2).Go to image folder and type following command (if SD card is mounted on e drive)

RSB-3720

flash_bootloader.cmd /device ROM3720_iMX8MP_6GB /target_drive e:

ROM-5722

flash_bootloader.cmd /device ROM5722_iMX8MP_6GB /target_drive e:

Miscellaneous

Flash mac address

- Open Registry Editor
- HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\xxxx
- Check the folders xxxx e.g. 0000, 0001.. and find your wanted ethernet interface (iMX Ethernet)
- Add new string variable called NetworkAddress and set address in format xx-xx-xx-xx-xx-xx
- Restart board