WISE-1530 RF Continue Tx Manual

From ESS-WIKI
Revision as of 04:27, 19 July 2017 by Erick.huang (talk | contribs)
Jump to: navigation, search

Preparing for Hardware

The user needs to prepare for hardware as following:

  • WISE-1530, WISE-1500 and WISE-ED22.
  • 802.11b/g/n (2.4 GHz) Wireless Access Point (AP).
  • PC running the Microsoft® Windows® 7 operating systems

Please refer to the following steps for setup a WISE-1530 boards.

Step01: Please prepare boards as below.

          RTENOTITLE

① WISE-1530

② WISE-1500

③ Power connector

④ Reset button

⑤ UART connector

⑥ RF connector    

Step02: Connect the WISE-1530 to PC via USB-to-UART cable.

  • Install USB-to-UART driver.
  • The device will be visible in the Device Manager as below, user can use serial port tools (putty, tera term ...etc.). 

          WISE-1530 uart2.png

RF Test 

You can see " Console app start, type 'help' " on console screen, after power on.

Step01: Use 'join' to Connect to AP

    join <ssid> <open|wpa_aes|wpa_tkip|wpa2|wpa2_tkip|wpa2_aes|wep> [key] [channel] [ip netmask gateway]

    Ex: join join RT66 wpa2_aes 987135238

Step02: Use 'Iperf' to Test Tx/Rx

   iperf [-s|-c host ip] [options]

   -u: use UDP mode

   -t: time(second)

   Ex.  as client: iperf -c 192.168.8.1 -u -t 30

Retrieved from "https://ess-wiki.advantech.com.tw/wiki/index.php?title=WISE-1530_RF_Continue_Tx_Manual&oldid=7562"