MCU/WISE-1570-FirmwareUpdate-For-BC95

From ESS-WIKI
Revision as of 09:28, 6 September 2017 by Will.chen (talk | contribs)
Jump to: navigation, search

Introduction

Running CCS installer

Step01: Prepare boards. Note: If you want to get pin-definition detailed, please get in touch with the contact person from ADVANTECH.

WISE1520 SDK Install ccs 01.png

Step02: Check the number of COM port detected from PC. Note: If you don't setup WISE-ED22 before, please refer to link for it firstly.

WISE1520 SDK install ccs 02.png

Step03: Find batch file “Codeloader-Erase.bat”, check the number of com port detected from PC in it and run it to erase for BC95. Note: If you don't have programming tool "Codeloader", please get in touch with the contact person from ADVANTECH.

Step04: Find batch file “Codeloader-Erase.bat”, check the number of com port detected from PC in it and run it to erase for BC95.

Step03: Find batch file “Codeloader-Erase.bat”, check the number of com port detected from PC in it and run it to erase for BC95.

Step04: Find batch file “CodeLoaderBC95HA.bat”, modify the number of com port detected from PC in it and run it to program for BC95.

WISE1520 SDK Install ccs 03.png

Step05: Press the "SW1" button on WISE-ED22 and you will see as below on terminal.

WISE1520 SDK Install ccs 04.png


Retrieved from "https://ess-wiki.advantech.com.tw/wiki/index.php?title=MCU/WISE-1570-FirmwareUpdate-For-BC95&oldid=8307"