Yocto User Guide - Eclipse Plug-in for iMX6 series

Prerequisites

Installing cross toolchain

Please use bitbake command to build one toolchain installer or get a pre-built one.

Qt4 SDK

Please perform following command to make toolchain installer.

$ bitbake fsl-image-x11 -c populate-sdk

Please change working directory to where installer located and perform the following command.

$ sudo ./poky-eglibc-x86_64-fsl-image-x11-cortexa9hf-vfp-neon-toolchain-qt4-1.5.3.sh

Qt5 SDK

Please perform following command to make toolchain installer.

$ bitbake fsl-image-x11-qt5 -c populate-sdk

Please change working directory to where installer located and perform the following command.

$ sudo ./poky-eglibc-x86_64-fsl-image-x11-qt5-cortexa9hf-vfp-neon-toolchain-1.5.3.sh

Working with Eclipse

Installing the Eclipse IDE

Please download "eclipse-standard-kepler-R-linux-gtk-x86_64.tar.gz" manually, put it to directory ~/FILES/ and perform the following commands:

$ cd ~/ $ tar xvf ~/FILES/eclipse-standard-kepler-R-linux-gtk-x86_64.tar.gz

Starting the Eclipse IDE

$ source /opt/poky/1.5.3/environment-setup-cortexa9hf-vfp-neon-poky-linux-gnueabi
$ ~/eclipse/eclipse

1.select your workspace location

2.Make sure you are in your Workbench and select "Install New Software" from the "Help" pull-down menu.

3.Select "Kepler - http://download.eclipse.org/releases/kepler" from the "Work with:" pull-down menu.

4.Expand the box next to "Linux Tools" and select the LTTng - Linux Tracing Toolkit boxes.

5.Expand the box next to "Mobile and Device Development" and select the following boxes:

6.Expand the box next to "Programming Languages" and select the following boxes:

7.Complete the installation and restart the Eclipse IDE.