Edge Sense LoRa Module Firmware Upgrade

Requirements

ST-LINK/V2

The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families.

https://www.st.com/en/development-tools/st-link-v2.html

STM32 ST-Link Utility

STM32 ST-LINK Utility (STSW-LINK004) is a full-featured software interface for programming STM32 microcontrollers.

This utility is available at http://www.st.com/en/development-tools/stsw-link004.html

RYLRxx6

Insert cable to LoRa module

Open STM32 ST-LINK Utility and select file for RYLRxx6 (ex: RYLRxx6_V0.2.10.hex)

Programming via STM32 ST-Link Utility

Step1 - Connect device

Step2 - Select hex file

Step3 - click "Program verify" button

Step4 - Click "Start"

Reference

• Lora程式更新與燒錄法 V0.93.pdf