Ubuntu L4T User Guide
From ESS-WIKI
Revision as of 08:00, 3 December 2019 by Daniel.hung (talk | contribs)
Contents
Getting Started
Host Environment
Ubuntu 18.04 (recommended) or 16.04
Force Recovery Mode
To enter force recovery mode, you can do:
- 1. Hold the Recovery key
- 2. Power on device
- 3. Wait for 5 seconds and you can release the Recovery key
Once it enters recovery mode successfully, the HDMI output should be disabled and also you can detect a new "nvidia apx" device.
Flash Pre-built Image
Install SDK Components
SDK Manager
Download the SDK Manager for Jetson TX2 series from JetPack website.
You will need a nVidia developer account for access.
After download complete, install via dpkg.
$ sudo dpkg -i sdkmanager_0.9.14-4964_amd64.deb
Then, you're able to run SDK manager.
$ sdkmanager