ROM-5620 user guide
From ESS-WIKI
Contents
- 1 資源特性(Features)
- 2 訂購資訊(Ordering Information)
- 3 接口布局和尺寸(Layout and Sizes)
- 4 快速入门 (Quick Start)
- 5 Linux系统的基本使用(Linux System Basic Operating Method)
- 5.1 UUU 使用方法(USB Connection (OTG port))
- 5.2 Display Setting (ROM-5620)
- 5.3 乙太網路使用方法(Ethernent Testing Method)
- 5.4 WiFi使用方法(WIFI Testing Method)
- 5.5 4G使用方法(4G Testing Method)
- 5.6 GPIO使用方法(GPIO Operating Method)
- 5.7 串口使用方法(Serial Port Operating Method)
- 5.8 蓝牙使用方法(BlueTooth Operating Method)
- 5.9 遠程訪問及文件傳輸(Remote Access and File Transimmion)
- 6 通用方法(General Method)
- 7 Linux BSP編譯方法(Android BSP Compile Method)
資源特性(Features)
- NXP i.MX 8X processor with 2-4 x Arm Cortex-A35 cores
- 1 x Arm Cortex-M4F core and 1x Tensilica® HiFi 4 DSP
- Onboard 2GB LPDDR4 memory and eMMC 16GB
- 2 x single channel LVDS or 2 x 4-LANE MIPI DSI
- 1 x USB 3.0, 1 x USB 2.0 Host, 1 x USB2.0 OTG, 2 x CAN, 3 x UART, 4 x I2C, 12 x GPIO, 1 x PCIe 3.0, 1 x 4-lane MIPI CSI camera input and 2 x Gigabit LAN
- Supports OpenGL 3.0/2.1 ; OpenGL ES 3.1/3.0/2.0/1.1 and OpenCL 2.0 hardware accelerators
- Supports 4K hardware decode engine
- Low power consumption desgin
- Supports Linux and Android BSP
訂購資訊(Ordering Information)
接口布局和尺寸(Layout and Sizes)
ROM-5620 接口布局圖 Board Dimension Layout
ROM-DB5901 接口布局圖 Board Dimension Layout
主板内置插针式引脚排序方式 (Pin Header defination)
Internal I/O
Position | Description | Connector Type |
BAT1 | PIN Header for Battery |
WAFER 8P 2.54mm 180D(M) DIP A2543WV2-8P |
BH1 | RTC Battery Holder |
BATTERY HOLDER 24.9*23.4*8.9 CR2032 BH800.4GG |
CAN1 | CANBus Port 1 |
BOX HEADER 5x2P 2.54mm 180D(M) DIP 23N6960-10S10 |
CAN2 | CANBus Port 2 |
BOX HEADER 5x2P 2.54mm 180D(M) DIP 23N6960-10S10 |
COM1 | COM Port 1 |
BOX HEADER 5x2P 2.54mm 180D(M) DIP 23N6960-10S10 |
COM3 | COM Port 3 (Debug Port) |
BOX HEADER 5x2P 2.54mm 180D(M) DIP 23N6960-10S10 |
CN4 | PCIex1 Connector 1 |
PCIEXPRESS 36P 180D(F) DIP 2EG01817-D2D-DF |
CN5 | PCIex1 Connector 2 |
PCIEXPRESS 36P 180D(F) DIP 2EG01817-D2D-DF |
CN6 | PCIex1 Connector 3 |
PCIEXPRESS 36P 180D(F) DIP 2EG01817-D2D-DF |
CN11 | SATA Connector |
Serial ATA 7P 1.27mm 180D(M) DIP WATM-07DBN4A3B8 |
CN12 | SATA Power Connector |
WAFER 4P 2.5mm 180D(M) DIP 24W1161-04S10-01T |
CN22 | GPIOx8 sets |
PIN HEADER 10x2P 2.0mm 180D(M) DIP 21N22050 |
CN25 | MXM 3.0 Connector |
MXM Conn. 314P 90D(F) SMD AS0B821-S78B-7H |
CN26 | M.2 Key E Slots |
NGFF 75P 0.5mm 90D(F) H=4.2mm SMD AS0BC21-S40BE |
CN38 | FAN (Reserved) | WTB Con. 3P 2.54mm 180D(M) DIP A2543WV0-3P-6T-5e |
CN39 | MIPI-CSI1 (FPC, 4-Lane |
FPC 39P, 0.6mm, H0.9mm |
CN40 | MIPI-CSI0 (FPC, 2-Lane) |
FPC 39P, 0.6mm, H0.9mm |
CN41 | MIPI-CSI0 (Mini-SAS, 2-Lane) |
Mini SAS 36P/0.8mm/(M)/LCP/VA/G15u/ S/BK/W |
CN42 | MIPI-CSI1 (Mini-SAS, 4-Lane) |
Mini SAS 36P/0.8mm/(M)/LCP/VA/G15u/ S/BK/W |
ESPI_CN1 | ESPI |
PIN HEADER 6x2P 2.0mm180D(M) SMD 21N22050-12M00B |
I2C_GP_1 | I2C Pin Header |
WAFER BOX 4P 2.00mm 180D(M) DIP 721-81-04TW00 |
I2C_CN3 | Audio Codec Board |
PIN HEADER 2x10P 2.54mm 180D(M) DIP 21N22564 |
LVDS0 | LVDS0 |
Wafer 2x20P/1.25mm/(M)/NY9T/VA/GFL/ S/WH/W |
LVDS_BK_PWR | LVDS0 Back Light |
WAFER BOX 5P 2.0mm 180D(M) DIP A2001WV2-5P |
LVDS1 | LVDS1 |
Wafer 2x20P/1.25mm/(M)/NY9T/VA/GFL/ S/WH/W |
LVDS1_BK_PWR | LVDS1 Back Light |
WAFER BOX 5P 2.0mm 180D(M) DIP A2001WV2-5P |
SD1 | SD Card Slot |
SD CARD 9P 90D(F) SMD WK2192CS3D- 7H |
SPI_CN1 | SPI Pin Header |
PIN HEADER 4x2P 2.54mm 180D(M) SMD 21N22564 |
SW2 | Reset Button |
TACT SW STS-091 SMD 4P H=3.8mm |
SW4 | SLP Button |
TACT SW STS-091 SMD 4P H=3.8mm |
SW5 | Power Button |
TACT SW STS-091 SMD 4P H=3.8mm |
USB0_OTG1 | USB OTG |
Micro USB 5P/0.65mm/(F)/NY9T/GFL/ RA/S/BK/B |
USB-4-5 | USB Port 4, Port 5 |
PIN HEADER 2x5P 2.0mm 180D(M) SMD 21N22050 |
Rear I/O
Position | Description | Name |
DCIN | DC Jack | A |
CN15A | UART Port 0 | B |
CN15B | UART Port 2 | C |
CN1A | DP Port | D |
CN1B | HDMI Port | E |
CN33 | Type C Controller Programming Header (Reserved Only) |
F |
CN34 | USB Type C |
G |
CN8 |
GbE Ethernet Connector Port |
H |
CN3 | USB Port 1/ 2 |
I |
Audio1 |
MIC Input/ Audio Output |
J |
接口引脚定義 (Pin definitions)
- 電池(BAT1) & 電池扣(BH1)
- CAN(CAN1,CAN2)
- 串口(COM_DB(COM3)、COM1、UART0 、UART2)
- 显示接口(LVDS、LVDS Backlight、HDMI、DP)
- LAN接口(LAN)
- USB接口(USB1-2、USB-4-5、USB Type C、USB OTG)
- 音频接口(Audio Output &Audio Codec)
- 电源及指示灯和开关机复位按钮(Power 、LED、Power Button、Reset Button、Sleep Button)
- GPIO接口
- MINI_PCIE接口_M.2接口_SPI、I2C_接口
机械尺寸 (Mechanical Characteristics)
ROM-5620
快速入门 (Quick Start)
系统下载 (OS Download)
- Linux系统 (Linux OS)
Linux 燒錄方法 (Linux Flash eMMC Method)
Debug 串口調試 (Debug port Setting)
Linux系统的基本使用(Linux System Basic Operating Method)
UUU 使用方法(USB Connection (OTG port))
Display Setting (ROM-5620)
U-boot Command :
setenv fdt_file xxxx.dtb
env save
boot
- Display
- LVDS
- g070vw01
- adv-imx8mxp-rom5620-a1.dtb
- g150xgel05
- adv-imx8qxp-rom5620-a1-lvds-chimei.dtb
- g215hvn01
- adv-imx8qxp-rom5620-a1-lvds-dual.dtb
- g070vw01
- LVDS to HDMI
- adv-imx8qxp-rom5620-a1-hdmi-bridge.dtb
- DSI to HDMI
- adv-imx8qxp-rom5620-a1-hdmi-bridge.dtb
- DSI
- auog101uan02
- adv-imx8qxp-rom5620-a1-auog101uan02.dtb
- auog101uan02
- LVDS
乙太網路使用方法(Ethernent Testing Method)
Command : ifconfig
Command: Ping - I eth1 8.8.8.8 or Ping - I eth0 8.8.8.8
WiFi使用方法(WIFI Testing Method)
Command :
# killall wpa_supplicant
# ifconfig wlan0 up
# wpa_passphrase "SSID" "PASSWORD" > /tmp/wpa.conf
# wpa_supplicant -BDwext -iwlan0 -c/tmp/wpa.conf
# udhcpc -b -i wlan0
ping 8.8.8.8
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
64 bytes from 8.8.8.8: icmp_seq=1 ttl=54 time=2.10 ms
64 bytes from 8.8.8.8: icmp_seq=2 ttl=54 time=2.10 ms
4G使用方法(4G Testing Method)
'''Command: ''' '''Test 4G: (EWM-C117FL06E - USB) Step 1: Connect EWM-C117FL06E to Mini PCIE slot on 9680015491 and connect the card to CN6 PCIe_D slot on ROM-DB5901. Step 2: Connect the antenna 1750007990-01 to the SMA (F) connector on 9680015491 and connect the IPEX connector to MT1 on EWM-C117FL06E module. Step 3: Connect the Mini USB cable from 9680015491 to USB 2.0 Type A port on ROM-DB5901. Step 4: Power on and execute the pppd command to connect to the network.''' '''[[File:4GTest2021-09-09 133204.jpg|RTENOTITLE]]'''
GPIO使用方法(GPIO Operating Method)
串口使用方法(Serial Port Operating Method)
蓝牙使用方法(BlueTooth Operating Method)
Command :
$ hciconfig hci0 up
$ bluetoothctl
$ discoverable on
$ pairable on
$ scan on
[NEW] FC:18:3C:8D:75:F4 myphone
$ scan off
$ pair FC:18:3C:8D:75:F4
$ connect FC:18:3C:8D:75:F4
遠程訪問及文件傳輸(Remote Access and File Transimmion)
通用方法(General Method)
查看CPU温度(Check CPU Temperature)
查看CPU频率(Check CPU Frequency)
查看内存容量(Check Memory Capacity)
查看存储容量(Check Storage Capacity)
網路Ping測試(Ping Network Testing)
ping 8.8.8.8 PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data. 64 bytes from 8.8.8.8: icmp_seq=1 ttl=54 time=2.10 ms 64 bytes from 8.8.8.8: icmp_seq=2 ttl=54 time=2.10 ms