DeviceOn ePaper Azure Marketplace

Deploy DeviceOn/ePaper from Azure Marketplace

test

Step 3. You will enter to Azure portal and please click on Start with pre-set configuration to be quick deployment

Step 4. This page includes our recommended configuration for DeviceOn/ePaper Server, you can click on Continue to create VM, following the default setting.

Step 5. On this page, please fill in the following information. Please note that the red-star items are required.
5-1. Select your Azure subscription
5-2. Create a new resource group or pick an existed one
5-3. Decide on your virtual machine name
5-4. Select the region of the virtual machine. You can pick one which is the nearest one to your location
5-5. Select DeviceOn ePaper - Gen2 as default image
5-6. Create an administrator account with username and password. Please note that you must remember them for remote access your virtual machine (with SSH connection).
5-7. Then click Next to continue to set-up the advanced setting, or click the Review + create to remain to default instead (skip to Step 9).

Step 6. On this page, you can choose the disk type on the virtual machine, or use the disk Standard SSD instead. Then click Next to move on.

Step 7. On this page, you can configure the network interface, or use the default setting instead. Then click Next to move on.

Step 8. On this page, you can schedule the power management of the virtual machine for reducing unnecessary costs, or use the default setting instead. Then click Review + create to move on.

Step 9. On this page, Azure will validate your virtual machine ( within 5 minutes) and summarize your product details including the prices and legal terms. Please click Create to move on.

Step 10. A few minutes later, you can see below the picture that your virtual machine has been created.

Step 2. Open a browser and enter the URL with the server IP to access DeviceOn/ePaper server. Please enter your default account and password (Please get in touch with Advantech provider to get one) and click the Sign In button to sign in

Step 3. If you access the server for the first time, you need to activate the server with a license key (Please get in touch with Advantech provider to get one). Then click submit button to move on

Step 4. Please assign Server IP to the server configuration for FTP usage (which should be the same as the server IP). Then click submit button to move on.

Step 5. Server activation is done. Now you can connect your devices to the server

This section demonstrates the inbound port used in this VM

Step 2. Check out whether the firewall inbound rules in the following table has been set or not (We have set-up the needed port by default).

Step 3. We recommend to close SSH connection port 22 (Enable it if you want to access VM via SSH connection for debug purpose).

Step 4. We recommend to close Service Monitor port 8090 (Enable it if you want to monitor each service for debug purpose).