EPC-R5710 CANBus or CAN-FD
From ESS-WIKI
Revision as of 01:44, 8 September 2023 by Xingxing.li (talk | contribs) (Created page with " === '''CANBus or CAN-FD''' === Two epc-r5710s are required. One of them acts as the receiver and executes the command of (step1), while the other acts as the sender an...")
CANBus or CAN-FD
Two epc-r5710s are required. One of them acts as the receiver and executes the command of (step1), while the other acts as the sender and executes the command of (Step2).
The (can) ports of two machines need to be linked together
The receiver needs to complete the line preparation
A：Pin2——>B：Pin2，
A：Pin7——>B：Pin7
