Edge Sense LoRa GW Solution
From ESS-WIKI
Contents
Introduction
Gateway Support Lists
Files Archives
Release
- ReyaxSol 0.0.1 (for 2018 embedded world)
- ReyaxSol 0.0.2
- ReyaxSol 0.0.3
- ReyaxSol 1.0.0-rc1 (for Ubuntu 16.04 for QA Test)
- ReyaxSol 1.0.0-rc2 (for Ubuntu 16.04 for QA Test)
- ReyaxSol 1.0.0-rc3 (for Ubuntu 16.04 for QA Test)
- ReyaxSol 1.0.0-rc4 (for Ubuntu 16.04 for QA Test)
- ReyaxSol 1.0.0-rc5 (for Ubuntu 16.04 for QA Test)
- ReyaxSol 1.0.0-rc6 (for Ubuntu 16.04 for QA Test)
- ReyaxSol 1.0.0
Tools
Check version
In Linux, execute command:
$ cat /usr/local/EdgeSense/LoRaMgt_ryx/version
1.0.0-rc6
Monitor Tools
reyaxmon is a monitor tool that it will show RF setting , gateway setting and sensor value from LoRa nodes.
Execute following commands to launch reyaxmon tools.
$ cd /usr/local/EdgeSense/LoRaMgt_ryx
$ sudo ./reyaxmon
Reyax AT Command Demo Script
This demo script is a simple bash script, aim to provide a preliminary understanding about Reyax At Command.
Script version : 0.3-beta
Support Reyax firmware version : RYLRxxP_V0.1.22
Download
- This demo script is available at Reyax-atcmd-demo.bash.tar.gz
- Download the file and upload it to Ubuntu. (Execute "wget http://ess-wiki.advantech.com.tw/wiki/images/4/4b/Reyax-atcmd-demo.bash.tar.gz" in terminal)
- Uncompress the file with command "tar zxfv Reyax-atcmd-demo.bash.tar.gz" , then reyax-atcmd-demo.bash will be ready to use.