i.MX8 Build Instructions
From ESS-WIKI
Revision as of 11:36, 8 April 2019 by Winston.huang (talk | contribs)
ROM-7720
Build Instructions (based on Freescale i.MX BSP L4.14.78_1.0.0_GA)
Please refer to this link to set Git configuration first.
$ repo init -u git://github.com/ADVANTECH-Corp/adv-arm-yocto-bsp.git -b imx-linux-sumo -m imx-4.14.78-1.0.0_ga.xml
$ repo sync
$ MACHINE=imx8qmrom7720a1 DISTRO=fsl-imx-xwayland source ./fsl-setup-release.sh -b build-xwayland
$ export LC_ALL=en_US.UTF-8 LANG=en_US.UTF-8 LANGUAGE=en_US.UTF-8
$ bitbake fsl-image-qt5-validation-imx
- While bitbake is done, the compressed image file, "fsl-image-qt5-validation-imx-imx8qmrom7720a1.sdcard.bz2", is located on the "tmp/deploy/images/imx8qmrom7720a1/" under the yocto base directory.
To create one bootable SD card
Please use the following command to flash the SD card:
$ bunzip2 -c fsl-image-qt5-validation-imx-imx8qmrom7720a1.sdcard.bz2 | sudo dd of={SDCARD_DEVICE_NAME} bs=1M