IoTGateway/BSP/Linux/Quark/Bluetooth Testing Guide

Bluetooth Testing Guide

Getting Started

Prerequisites

All operations in this guide are based on BlueZ5, please make sure the verion of used BSP is 2011 at lease.

Convert BlueZ4 to BueZ5 if BSP quarkLBV2011 used

In LBV2011 the BlueZ4 is used by default, it is necessary to do the following precedures to convert to use BlueZ5.
Download the File:QuarkLBV2011 convert to BlueZ5.tar.gz, and perform below command

$ tar xvf quarkLBV2011_convert_to_BlueZ5.tar.gz -C ${BSP_HOME}

Rebuild the image-full by

$ bitbake image-full