How to flash the Debian image into RSB-4680

 0. Need to use Micro USB to connect with RSB-4680 OTG port, and other Type-A USB to connect with your PC .

               

1.  For Android tool , need to modify the config file  , to select English setting . I have added the file in the attached file , please replace  the .ini file into Android tool folder .

 please modified "Selected = 2 "  (F--Phill.liu (talk) 04:03, 10 June 2021 (CEST)or English)

2.  Install DriverAssitant 

3.    Change CN19 ,

Default : pin2 & pin3 connect with a Jumper ,please change pin 1 & pin 2 to connect with Jumper and connect with Micro USB with RSB-4680 OTG port , then turn on the power .

4. Execute AndroidTool in the AndroidTool_Release folder 

5. Found a “MaskROM” Device

Note:   It means "Found a MASKROM Device "  

6.  Before we have changed pin 1 & pin 2 to connect with Jumper, Now we need to change back to pin2 & pin3 to connect with Jumper . (Did not need to turn off the power ) .

7. Execute “執行(execute)“ , it will start to flash Debian image into eMMC flash

Note :  It means "Execute" 

--Phill.liu (talk) 04:03, 10 June 2021 (CEST)

Note:  It means "Download" now . the tool is downloading into Device. 

8. When “下載完成(Download finish )” , please unplug the Micro USB with RSB-4680 , then turn off and turn on the power again .

Note:  It means " Done" , the tool already finished. 

9. Please remove the Micro USB and the poewer , then reboot the device , you will see the Debian Desktop. 

_

---