Display Setting (RSB-3710)
From ESS-WIKI
Revision as of 10:22, 20 January 2022 by Phill.liu (talk | contribs) (Created page with "== Enter U-boot interrupt modehttp://ess-wiki.advantech.com.tw/wiki/index.php?title=How_to_Config_Multi-Display_for_RK3399_RSB4710&action=edit§ion=3 edit == Connect d...")
Contents
Enter U-boot interrupt mode[edit]
Connect device to debug port, and open debug console.
Press "ctrl + c" key before power up the device, until get the following information on debug console :
Hit any key to stop autoboot: 0 => <INTERRUPT> =>
Then you can input the following cammand to config Multi-Display.
eDP + HDMI[edit]
setenv prmry_screen edp-1920x1080 setenv extend_screen hdmi-default saveenv reset
or
setenv prmry_screen hdmi-default setenv extend_screen edp-1920x1080 saveenv reset
eDP + LVDS[edit]
setenv prmry_screen edp-1920x1080 setenv extend_screen lvds-g070vw01 saveenv reset
or
setenv prmry_screen lvds-g070vw01 setenv extend_screen edp-1920x1080 saveenv reset
LVDS + HDMI[edit]
setenv prmry_screen hdmi-default setenv extend_screen lvds-g070vw01 saveenv reset
or
setenv prmry_screen lvds-g070vw01 setenv extend_screen hdmi-default saveenv reset
eDP + DP[edit]
setenv prmry_screen edp-1920x1080 setenv extend_screen dp-default saveenv reset
or
setenv prmry_screen dp-default setenv extend_screen edp-1920x1080 saveenv reset
LVDS + DP[edit]
setenv prmry_screen dp-default setenv extend_screen lvds-g070vw01 saveenv reset
or
setenv prmry_screen lvds-g070vw01 setenv extend_screen dp-default saveenv reset
HDMI + DP[edit]
setenv prmry_screen hdmi-default setenv extend_screen dp-default saveenv reset
or
setenv prmry_screen dp-fefault setenv extend_screen hdmi-default saveenv reset