IoTGateway/BSP/Android/Features/Display

Recommended Display Module List

Module Name	type	Description
96LEDK-A070WV35NB1	single	7" Color TFT-LCD Panel, 800 x 480
96LEDK-A121XG50NE1	single	12.1" Color TFT-LCD Panel, 1024 x 768
CHIMEI INNOLUX M185BGE	single	18.5" Color TFT-LCD Panel, 1366 x 768
AUO M240HW01-VB	single	24" Color TFT-LCD Panel, 1920 x 1080, Dual channels
IDK-1107WR-40WVA1E	single	7" 800x480 LVDS 400nits -20~70℃ LED 6/8-bit with 4-wire Resistive Touch Display Kit
IDK-1115R-40XGC1E	single	LCD DISPLAY, 15" LED panel 1024x768(G) with 5W R-touch
DK-1115P-40XGC1E	single	15" 1024x768 LVDS 400nits -20 to +70℃ LED 50K Projective Capacitive Touch Display Kit
DK-1121WR-30FHA1E	single	21.5” 1920x1080 LVDS 300nits 0~60℃ LED with 5-wire Touch Display Kit
IDS-3112EN-45SVA1E	single	12" SVGA 450nits Open Frame Monitor
IDS-3112N-45SVA1E	single	12" 800 x 600, LED Slim Open Frame Monitor with VGA/DVI Interface
samsung-LTI370N01 Display	Dual channel	37" 1920×540, TFT-LCD, LVDS (2ch,10-bit)Interface

Dual Channel LVDS Display

Calculating Timings parameter of LVDS Panel SOP OS: Yocto 1.8 Modify imx6qdl-advantech.dtsi Step1: In ldb parameter, add parameter --> split-mode; /* dual-channel setting *

  &ldb {
       ext_ref = "true";
       status = "okay";
       split-mode; /* dual-channel setting */

Step2: In lvds-channel@1, change [crtc = "ipu1-di1";] to [crtc = "ipu1-di0";]

       lvds-channel@1 {
               fsl,data-mapping = "spwg";
               fsl,data-width = <24>;
               /* crtc = "ipu1-di1"; */
               crtc = "ipu1-di0"; /* dual-channel setting */
               status = "okay";

Step3: In display-timings native-mode = <&timing0>, Delete the other panel parameter.Add" LTI370LN01 " Parameter

        //Dual channel panel
                       timing0: lti370ln01 {
                               clock-frequency = <148500000>;
                               hactive = <1920>;
                               vactive = <544>;
                               hback-porch = <70>;
                               hfront-porch = <70>;
                               vback-porch = <200>;
                               vfront-porch = <200>;
                               hsync-len = <140>;
                               vsync-len = <185>;
                       };

Calculating Timings parameter Check your panel Timing table Example : samsung 37 inch panel

(1)clock-frequency --> Clock (MHz)

(2)hactive --> Horizontal Active Display Period

(3)vactive --> Vertical Active Display Period

(4)hback-porch + hfront-porch + hsync-len (Total) = Blanking = Horizontal Total - Horizontal Active Display Period

(5)vback-porch + vfront-porch + vsync-len (Total) = Blanking = Vertical Total - Vertical Active Display Period

Touch Screen Panel

IRTOUCH panel [Android 4.4]

 (1) Download IRTOUCH driver  (Irtouch-dualtouch-package-android-v14.2.0.0002.7z)
 (2) Download IRTOUCH SWAP mode tool (Swapmode.7z)
 (3) Swap mode
     You need to check and swap IRTOUCH 0X80.
     Please install SWAP mode tool in win7.
     Run SwapModeTool.exe and choose IRTOUCH 0X80.  
 (4) Installing the IRTOUCH Dual-touch Touchscreen Driver
     (a) irtouchusb-dt.c locate to kernel_imx/driver/input/touchscreen;
     (b) modify Makefile in kernel_imx/driver/input/touchscreen
         add:  "obj-$(CONFIG_TOUCHSCREEN_USBIRTOUCH_DT)	+= irtouchusb-dt.o"
     (c) modify Kconfig in kernel_imx/driver/input/touchscreen
         add:
         config TOUCHSCREEN_USBIRTOUCH_DT
                tristate "IRTOUCH USB Touchscreen Driver For single point"
                depends on USB_ARCH_HAS_HCD
                select USB
                help
                  Say Y here if you have a IRTOUCH based touchscreen
                  controller.
                  If unsure, say N.
                  To compile this driver as a module, choose M here: the
                  module will be called irtouch.
     (d)  You can make menuconfig select TOUCHSCREEN_USBIRTOUCH_DT and build kernel 
          Modify defconfig CONFIG_TOUCHSCREEN_USBIRTOUCH_DT=y
          example : imx6_rsb4410_android_kk44_defconfig
     (e)  Add one line to Android file system's ueventd.rc: 
          File path : device/fsl/imx6/etc/ueventd.freescale.rc  
          /dev/irtouch      0666   root    root
     (f)  Copy "Vendor_6615_Product_0081.idc" and "Vendor_6615_Product_0080.idc" file to the Android file system's /usr/idc directory. 
 (5)  Calibration the Touchscreen
         Install CalibrationTools.apk and run "CalibrationTools" to start calibrate touchscreen. 
         package name:com.irtouch.android.calibration    
         class name:  CalibrationToolsActivity

eGTouch touch panel [Android 4.2 ~ Android 4.4]

 (1) Add "eGalaxCalibrator" PRODUCK PACKAGES in device/fsl/imx6/iMX6.mk
 (2) Add eGtouch file path in device/fsl/imx6/iMX6.mk
     device/fsl/common/input/eGTouch_v2.5.2320.A/eGalaxTouch_VirtualDevice.idc:system/usr/idc/eGalaxTouch_VirtualDevice.idc \
     device/fsl/common/input/eGTouch_v2.5.2320.A/eGTouchA.ini:data/eGTouchA.ini \
     device/fsl/common/input/eGTouch_v2.5.2320.A/eGTouchD:system/bin/eGTouchD \
 (3) Add eGtouch idc and ini file in device/fsl/imx6/BoardConfigCommon.mK
     BOARD_USERDATAIMAGE_PARTITION_SIZE := 128M
     device/fsl/common/input/eGTouch_v2.5.2320.A/eGTouchA.ini
     device/fsl/common/input/eGTouch_v2.5.2320.A/eGTouchD
     device/fsl/common/input/eGTouch_v2.5.2320.A/eGalaxTouch_VirtualDevice.idc
 (4) Add service about eGTouch in device/fsl/rsb_4410/init.rc
      service eGTouchD /system/bin/eGTouchD
        class main
        user root
        group root
        oneshot      [Android 4.2 and 4.4 MP version is include eGTouch function]