Android BSP User Guide for rk3399 series
From ESS-WIKI
== 資源特性(Features) ==
- Rockchip RK3399 ARM Dual Cortex-A72 and Quad Cortex-A53 1.8 GHz
*Onboard 2GB LPDDR4 memory and 16GB eMMC
*Dual HDMI(4K 60fps + 1080P), 1 x eDP, 1 x dual channel LVDS, 1 x MIPI CSI
*Supports 4K H.264/H.265 video decoder
*6 x serial, 1 x USB3.0, 4 x USB2.0 ,1 x USB OTG, 2 x GbE, 1 x SPI, 1 x I2C, 5 x GPIOs
*M.2 for WIFI/BT support, mini-PCIe for 3G/4G support
*Supports Debian9/10 and Android7.1/10.0
Contents
- 1 訂購資訊(Ordering Information)
- 2 Packing List
- 3 接口布局和尺寸(Layout and Sizes)
- 4 Connector List
- 5 快速入门 (Quick Start)
- 6 Android 燒錄方法 (Android Flash eMMC Method)
- 7 Linux系统的基本使用(Linux System Basic Operating Method)
- 8 通用方法(General Method)
- 8.1 乙太網路使用方法(Ethernent Testing Method)
- 8.2 設置RTC (RTC Setting)
- 8.3 WiFi使用方法(WIFI Testing Method)
- 8.4 4G使用方法(4G Testing Method)
- 8.5 蓝牙使用方法(BlueTooth Operating Method)
- 8.6 音訊使用方法(BlueTooth Operating Method)
- 8.7 I2C 測試( I2C Test method)
- 8.8 看門狗測試 (Watch Dog Test method)
- 8.9 攝像頭測試(Camera Test method)
- 8.10 遠程訪問及文件傳輸(Remote Access and File Transimmion)
- 9 How to build Android 7 BSP (Android 7 BSP 編譯)
- 10 How to build Android 10 BSP (Android 10 BSP 編譯)
訂購資訊(Ordering Information)
Packing List
接口布局和尺寸(Layout and Sizes)
接口布局圖 Board Dimension Layout
Connector List
接口引脚定義 (Pin definitions)
- 电池扣（RTC）
*串口（RS-232 (COM1)，RS-232/Debug Port (COM2/DEBUG)，RS-232/485 (COM56)，Internal RS-232 (COM34)）
*显示接口（LVDS,LVDS_BL,EDP,HDMI）
*LAN接口（LAN1，LAN2）
*USB接口（USB1，Pin Header，OTG）
*音频接口（Audio）
*Micro SD & Nano SIM Card
*电源及指示灯和开关机复位按钮（DC Power，Power Button and LED）
*Mini PCIe & MIPI CSI 接口
*M.2接口
*GPIO接口
*SPI ，I2C接口
*RSB-4710 Jumper List
机械尺寸 (Mechanical Characteristics)
快速入门 (Quick Start)
系统下载 (OS Download)
Android 7 ：
Baidu link for Debian9 Password：dn35
| Product |
Date |
Release |
Release Note |
Binary OS Image Name |
| RSB-4710 |
|
|
[] |
RSB4710A2android.img.tgz |
Android 10：
Baidu link for Debian10 Password：nvpp
Dropbox link for Debian10
| Product |
Date |
Release |
Release Note |
Binary OS Image Name |
| RSB-4710 |
2021-04-14 |
Beta |
Release Note |
RSB4710A2AIM20DIV251012_2021-04-14.img.tgz |
Android 燒錄方法 (Android Flash eMMC Method)
There are three ways to update images：
1._Using_AndroidToool.
There is no limitation by this way.
2._Using_storage（such sd_or_USB_disk）with_update.zip_in_it.
There are some limitations：
（1）The device must be able to boot up to Android system.
（2）Only update images from the same os, eg :
Android6.0 upgrade to Android6.0 or Android7.1 upgrade to Android7.1.
（3）Using update.zip to upgrade. (see more detail in "Create OTA zip" on how to create update.zip)
3._Using_bootup_sd_disk made_by SDDiskTool.
（1）Only update images from the same os, eg :
Android6.0 upgrade to Android6.0 or Android7.1 upgrade to Android7.1.
（2）Using update.img to upgrade.
Linux系统的基本使用(Linux System Basic Operating Method)
User Guide
RISC series(RSB-3710/RSB-4710/ROM-5780)
DS-100
- Linux BSP User Guide for rk3399 series Debian9
*Linux BSP User Guide for rk3399 series DeviceOn
*Linux BSP User Guide for SGI [DMS-SA53]
通用方法(General Method)
乙太網路使用方法(Ethernent Testing Method)
Command : ifconfig root@linaro-alip:~# ifconfig<br/> docker0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500<br/> inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255<br/> ether 02:42:83:27:77:c0 txqueuelen 0 (Ethernet)<br/> RX packets 0 bytes 0 (0.0 B)<br/> RX errors 0 dropped 0 overruns 0 frame 0<br/> TX packets 0 bytes 0 (0.0 B)<br/> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500<br/> inet 192.168.127.101 netmask 255.255.255.0 broadcast 192.168.127.255<br/> inet6 fe80::e405:b000:5963:d697 prefixlen 64 scopeid 0x20<link><br/> ether c6:ff:6c:34:9d:7d txqueuelen 1000 (Ethernet)<br/> RX packets 23 bytes 7566 (7.3 KiB)<br/> RX errors 0 dropped 0 overruns 0 frame 0<br/> TX packets 45 bytes 5391 (5.2 KiB)<br/> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0<br/> device interrupt 24 eth1: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500<br/> ether 96:a4:98:8d:52:09 txqueuelen 1000 (Ethernet)<br/> RX packets 0 bytes 0 (0.0 B)<br/> RX errors 0 dropped 0 overruns 0 frame 0<br/> TX packets 0 bytes 0 (0.0 B)<br/> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536<br/> inet 127.0.0.1 netmask 255.0.0.0<br/> inet6 ::1 prefixlen 128 scopeid 0x10<host><br/> loop txqueuelen 1 (Local Loopback)<br/> RX packets 484 bytes 32428 (31.6 KiB)<br/> RX errors 0 dropped 0 overruns 0 frame 0<br/> TX packets 484 bytes 32428 (31.6 KiB)<br/> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0Command : ping 192.168.127.101 root@linaro-alip:~# ping 192.168.127.101<br/> PING 192.168.127.101 (192.168.127.101) 56(84) bytes of data.<br/> 64 bytes from 192.168.127.101: icmp_seq=1 ttl=64 time=0.221 ms<br/> 64 bytes from 192.168.127.101: icmp_seq=2 ttl=64 time=0.135 ms<br/> 64 bytes from 192.168.127.101: icmp_seq=3 ttl=64 time=0.134 ms<br/> 64 bytes from 192.168.127.101: icmp_seq=4 ttl=64 time=0.137 ms<br/> 64 bytes from 192.168.127.101: icmp_seq=5 ttl=64 time=0.137 ms<br/> ^C<br/> --- 192.168.127.101 ping statistics ---<br/> 5 packets transmitted, 5 received, 0% packet loss, time 5ms<br/> rtt min/avg/max/mdev = 0.134/0.152/0.221/0.037 ms<br/> root@linaro-alip:~#<br/>=== 查看CPU温度(Check CPU Temperature) === root@linaro-alip:~# cat /sys/devices/virtual/thermal/thermal_zone0/temp 34444<br/> # 或者直接以度爲單位顯示 echo $[$(cat /sys/class/thermal/thermal_zone0/temp)/1000]° >>> 37°<br/>=== 查看CPU频率(Check CPU Frequency) === root@linaro-alip:~# cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq<br/> 408000<br/> root@linaro-alip:~# cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq<br/> 1416000<br/>=== 查看内存容量(Check Memory Capacity) === root@linaro-alip:~# busybox free -m<br/> total used free shared buff/cache available<br/> Mem: 1961 269 1454 18 237 1696<br/> Swap: 0 0 0<br/>=== 查看存储容量(Check Storage Capacity) === root@linaro-alip:~# df -h<br/> Filesystem Size Used Avail Use% Mounted on<br/> /dev/root 7.9G 2.6G 4.9G 35% /<br/> devtmpfs 973M 8.0K 973M 1% /dev<br/> tmpfs 981M 0 981M 0% /dev/shm<br/> tmpfs 981M 8.9M 972M 1% /run<br/> tmpfs 5.0M 4.0K 5.0M 1% /run/lock<br/> tmpfs 981M 0 981M 0% /sys/fs/cgroup<br/> /dev/mmcblk1p10 6.4G 3.8M 6.4G 1% /userdata<br/> /dev/mmcblk1p7 63M 13M 48M 21% /oem<br/> tmpfs 197M 8.0K 197M 1% /run/user/1000<br/> tmpfs 197M 0 197M 0% /run/user/0<br/> root@linaro-alip:~#<br/> 設置RTC (RTC Setting)
root@linaro-alip:~# date<br/> Wed May 11 01:12:06 UTC 2022<br/> root@linaro-alip:~# date -s "2022-5-11 09:12:00"<br/> Wed May 11 09:12:00 UTC 2022<br/> root@linaro-alip:~# date<br/> Wed May 11 09:12:06 UTC 2022<br/> root@linaro-alip:~# hwclock -w<br/> root@linaro-alip:~# hwclock<br/> 2022-05-11 09:12:17.266424+00:00WiFi使用方法(WIFI Testing Method)1.Click Settings 2.Turn on Wi-Fi 3.Choose ESSID (for example, Advantech for guest) 4.Input the password 5.Wi-Fi connected 4G使用方法(4G Testing Method)蓝牙使用方法(BlueTooth Operating Method)音訊使用方法(BlueTooth Operating Method)I2C 測試( I2C Test method)看門狗測試 (Watch Dog Test method)攝像頭測試(Camera Test method)遠程訪問及文件傳輸(Remote Access and File Transimmion)How to build Android 7 BSP (Android 7 BSP 編譯)http://ess-wiki.advantech.com.tw/view/Android_BSP_User_Guide_for_rk3399_series_7.1.2 How to build Android 10 BSP (Android 10 BSP 編譯)http://ess-wiki.advantech.com.tw/view/Android_BSP_User_Guide_for_rk3399_series_10.0 | |