AIR 030 Development

Flash

Extract image

$ tar -zxvf air030_image_XXXXXX.tar.gz

Flash image

$ cd bootloader
$ sudo -s
# source flashcmd.txt

Flash Mac

Check All Intel-226 Module in PCI bus, The BDF(bus number/device number/function number) value will be first column.

ubuntu@localhost:~$ lspci
0004:00:00.0 PCI bridge: NVIDIA Corporation Device 229c (rev a1)
0004:01:00.0 PCI bridge: ASMedia Technology Inc. Device 2806 (rev 01)
0004:02:00.0 PCI bridge: ASMedia Technology Inc. Device 2806 (rev 01)
0004:02:06.0 PCI bridge: ASMedia Technology Inc. Device 2806 (rev 01)
0004:02:0e.0 PCI bridge: ASMedia Technology Inc. Device 2806 (rev 01)
0004:04:00.0 Ethernet controller: Intel Corporation Device 15f2 (rev 03)
0004:05:00.0 Ethernet controller: Intel Corporation Device 15f2 (rev 03)

Check NIC value with EepromAccessTool tool.

$./EepromAccessTool
Intel(R) EEPROM Access Tool NVM/OTP Programming Example Tool   Version 0.8.0
Provided under the terms of a CNDA.  Do Not Distribute.
Copyright(C) 2017-2020 by Intel(R) Corporation
NIC     BUS     DEV     FUN     Silicon Memory Type Present
===     ===     ===     ===     =====   ======================
Check Command open to write error
 1      4        0       0      I225         FLASH
Check Command open to write error
 2      5        0       0      I225         FLASH

Boot On Off

The boot count message will be printed before log-in.

Reset the boot count please remove bootCount.tt.

$ rm bootCount.tt

Image

The test image is available HERE.

	Image	Release Note
1	air030_image_20221006.tar.gz	The first boot up image verified on AGX-ORIN Devkit.
2	air030_image_20221006_bootonoff.tar.gz	Based on air030_image_20221006.tar.gz added boot on off feature (The system will power off after 40 seconnds)