DeviceOn ePaper Azure Marketplace
From ESS-WIKI
Revision as of 09:27, 10 November 2022 by Fabian.chung (talk | contribs)
Contents
Deploy DeviceOn/ePaper from Azure Marketplace
User Guide
- Step 1: Please enter Azure Marketplace and click “GET IT NOW”
- Step 2. You will enter to Azure portal and please click on Start with pre-set configuration to be quick deployment
- Step 3. This page includes our recommended configuration for DeviceOn/ePaper Server, you can click on Continue to create VM, following the default setting.
- Step 4. On this page, please fill in the following information. Please note that the red-star items are required.
- Step 5. On this page, you can choose the disk type on the virtual machine, or use the default disk Premium SSD instead. Then click Next to move on.
- Step 6. On this page, you can configure the network interface, or use the default setting instead. Then click Next to move on.
- Step 7. On this page, you can schedule the power management of the virtual machine for reducing unnecessary costs, or use the default setting instead. Then click Review + create to move on.
- Step 8. On this page, Azure will validate your virtual machine ( within 5 minutes) and summarize your product details including the prices and legal terms. Please click Create to move on.
- Step 9. A few minutes later, you can see below the picture that your virtual machine has been created.
Set up the firewall on Azure VM
User Guide
- Step 1: Please go to the Networking blade under Settings
- Step 2. Please add the following inbound port rules in the network interface to make DeviceOn/ePaper functional
Port | Inbound rule | Service |
---|---|---|
22 | Disable | SSH* |
80 | Enable | HTTP |
443 | Enable | HTTPS |
8090 | Disable | Service Monitor* |
1883 | Enable | MQTT |
8883 | Enable | TLS/SSL encrypted MQTT |
5672 | Enable | AMQP |
5671 | Enable | TLS/SSL encrypted AMQP |
2121 | Enable | FTP |
60001-60100 | Enable | FTP Passive Mode |
5853 | Enable | EPD_Hub |
5854 | Enable | EPD_Hub |
69 | Enable | EPD_Hub |
30000-30120 | Enable | EPD_Hub |
- Step 2-1. Add an inbound port rule
- Step 2-2. Enter a port in the above table and click Add
Activate DeviceOn/ePaper server
User Guide
- Step 1: Go to Overview blade and find the server IP for your virtual machine
- Step 2. Open a browser and enter the URL with the server IP to access DeviceOn/ePaper server. Please enter your default account and password (Please get in touch with Advantech provider to get one) and click the Sign In button to sign in
- Step 3. If you access the server for the first time, you need to activate the server with a license key (Please get in touch with Advantech provider to get one). Then click submit button to move on
- Step 4. Please assign Server IP to the server configuration for FTP usage (which should be the same as the server IP). Then click submit button to move on.
- Step 5. Server activation is done. Now you can connect your devices to the server