EPC-R5710 I2C & TPM
From ESS-WIKI
Revision as of 03:17, 4 September 2023 by Xingxing.li (talk | contribs)
I2C
Step 1: Check i2c device( tpm : 1----0x2e)
Step 2: I2c set and get
# i2cset -f -y 1 0x2e 0x00 0x3f # i2cget -f -y 1 0x2e 0x00 0x3f
TPM-Z32H330TC
Execute command (tpm-ST33HTP-Demo). If the following message appears, it is successful.
Note：This device is an i2c communication device, and the testing method is the same as described in section 3.7.4 above.