2. RSB-4810 Debian SD update image

From ESS-WIKI
Revision as of 01:49, 20 October 2023 by Xingxing.li (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Note: First make sure that the current system of the board is Linux. If the current system of the board is Android, this method cannot be used. Only "Method 1" can be used.

Step 1: Generate update.img , Double-click the mkupdate.bat file in the rockdev\ directory on your PC.

RTENOTITLE

Wait patiently to generate "rockdev\update.img".

RTENOTITLE

RTENOTITLE

Step 2 ：Decompress SDDiskTool v1.69.zip

RTENOTITLE

a ) Take an SD card with more than 8G (small card) Insert the SD card into the card reader, and then insert the device into the PC .

b )  Open SWick Create Upgrade disk tool v1.69, select the function mode as "Firmware upgrade" .

c )  Select the absolute path where the firmware upgrade is update.img .

d )  Ignore Then click on "Start creating"

RTENOTITLERTENOTITLE

Wait patiently for burning success.

RTENOTITLE

Step 3 : Burn system using SD card

a ) Insert the SD card made just now into the SD card slot (it is recommended to connect the debug cable.

RTENOTITLE

b )  Power on and wait for the burning to complete (connect the debug line to see the burning progress.

RTENOTITLE

Retrieved from "https://ess-wiki.advantech.com.tw/wiki/index.php?title=2._RSB-4810_Debian_SD_update_image&oldid=31334"