ROM-6881 How to configurate Static IP

Ethernet

ROM-6881 supports two Ethernet ports : eth0/eth1. Both ports are using “DHCP”mode by default. The following configurations and tests are taking eth0 for example.

1. The LAN signal of the core board ROM-6881 is connected to the SOM-DB2510 interface of the mainboard as LAN0 LAN1.

Configure to Static IP

1. Click “Applications” -> “Settings” -> “Advanced Network Configration”.

 

STEP 1 : 

Right-click network icon, then left-click "Edit Connections..."

STEP 2 : 

Double-click "Wired connection 1"

STEP 3 : 

Left-click "IPv4 Settings"

• Choose "Manual"
• Left-click "Add" Button and input Address 、Netmask and Gateway
• Left-click "Save" Button