ROM-6881 user guide

產品特性(Features)

• Rockchip RK3588 Arm Quad Cortex-A76 2.4GHz and Quad Cortex-A55 1.8 GHz
• Onboard 4/8 GB LPDDR4 memory and 32/64 GB eMMC
• Supports 8K @ 60 fps H.265/VP9 video decoding and 8K @ 30 fps H.265/H.264 video encoding
• Supports HDMI, DP, eDP and LVDS/DSI
• 4 x PCIe 3.0, dual gigabit LAN, 2 x USB 3.0, USB2.0 OTG, SATA 3.0, 2 x CAN, 4 x MIPI-CSI, 3 x UART
• Supports Linux Debian11 and Android

 

接口佈局和尺寸（Layout and Sizes）

ROM-6881接口佈局图 Board Dimension Layout

Connector List

Position	Description
SW1	AT & ATX Mode Switch
CN1	MIPI-CSI2 Connector
CN2	MIPI-CSI3 Connector

SOM-DB2510 A1 Board Dimension Layout

The figures below indicate the main chips on SOM-DB2510 Development Board for  SMARC 2.1.

SOM-DB2510 Connectors and Jumper Settings（default state）

Connector Locations

Switch Locations

I/O Connctor Locations

Button Locations

LED Locations

Label	Function	Label	Function
ATX1	ATX Connector	FAN1	Smart Fan Connector
SMARC_IN1	Wide Range Input Power Connector (3V~5.25V)	FAN2	System Fan Connector
DCIN1	DCIN connector	CAN0_1	CAN Bus Connector
DP0_HDMI	DP & HDMI Connector	USB0	USB OTG Connector
USB12	USB 2.0 port1~2 & USB 3.0 port0 Connector	COM1_3	COM Port Port1,3 Connector
TYPEC_DP1	Type-C Connector	COM2_4	COM Port Port2,4 Connector
LAN0_LAN1	LAN0 & LAN1 Connector	CN8	I2C connector for I2C_PM
LOUT1	Line Out Connector	CN7	I2C Connector for I2C_GP
MIC1	MIC1 Connector	CN10	eSPI Pin Header
CN1_MXM1	SMARC Connector	SATAP1	SATA Power Connector
PCIEA-X4	PCIe x4 Connector	CSI0_B2B	MIPI B2B Connector for 2M Camera
SATA1	SATA Port0 Connector	CSI1_B2B	MIPI B2B Connector for 8M & 13M Camera
PCIED-X1	PCIe x1 Connector	SPI_BIOS1	Carrier Board BIOS Socket (SOIC)
M2	M.2 Key-E Connector	BAT1	Coin battery holder
MPCIE_C	Mini PCIe Connector	BAT2	Smart battery Connector
SIM	SIM card Connector	LINEOUT_1	I2S Headphone Connector
LVDS1	LVDS1 Connector	MIC_1	I2S MIC In Connector
LVDS0	LVDS0 Connector	CSI1_FPC	MIPI FPC Connector for 8M & 13M Camera
LVDS1_INVERTER	LVDS1 Invertor Connector	CSI0_FPC	MIPI FPC Connector for 2M Camera
LVDS0_INVERTER	LVDS0 Invertor Connector	CN5	I2S2 Connector
SPI_BIOS2	Carrier Board BIOS Socket (QFN)	CN17	I2S0 Connector
SD	SD Card Connector

Jumper Locations

Lable	Function	Lable	Function
BTN3	Sleep Button	J14	EDP1/LVDS1 Hot-Plug Detect Selection Header
BTN1	Power Button	J56	Standby Voltage Control Header
BTN2	Reset Button	J44	Module +3.3V/+5V Power Selection Header
SW4	BOOT SELECT Switch	PSON1	AT/ATX Selection Header
LID1	LID Switch	SPI_CN1	SPI Header
J30	Enable Battery Low# Header	CN14	For CAN Bus port0 Terminal Resistor
M2E_DISABLE_N1	M.2 Wireless Disable	CN15	For CAN Bus port1 Terminal Resistor
J29	SMB Alert Enable Header	J3/J4	DP0 EQ0 Selection
CN9	Header For GPIO Test	J5/J6	DP0 EQ1 Selection
J7/J8	LVDS0 Power Selection Header	J58	PCIE_B_CKREQ# Selection
J11/J12	LVDS1 Power Selection Header	J59	PCIE_A_CKREQ# Selection
J9	LVDS0 Inverter Power Selection Heade	GPIO_0	GPIO0/CAM0_PWR# Selection
J10	EDP0/LVDS0 Hot-Plug Detect Selection Header	GPIO_1	GPIO1/CAM1_PWR# Selection
J26	HDA/I2S Selection Header	GPIO_2	GPIO2/CAM0_RST# Selection
J1	DP1/HDMI1 Select	GPIO_3	GPIO3/CAM1_RST# Selection
J13	LVDS1 Inverter Power Selection Header	GPIO_4	GPIO4/HDA_RST# Selection
J31	Clear CMOS Header	GPIO_5	GPIO5/PWM_OUT Selection
J25	SPI Power Header	GPIO_6	GPIO6/TACHIN Selection
SW1	COM1 mode Select	SATA_ACT_PH1	SATA act# Header
SW2	COM3 mode Select	PWRBTN_PH1	Power button Header
J41	Core Power Voltage Control Header	SYS_RESET_PH1	Reset button Header
J2	DDI1 AUX/DDC Selection

LED Function List 

Location	Function
MODULE_VIN_LED1	WDT_TIME_OUT# Indicate
MODULE_5V_LED	Module 5V Indicate
MODULE_VIN_LED	Module +V_MOD_IN Indicate
RESET_OUT_LED	RESET_OUT Indicate
RESET_OUT_LED	CARRIER_STBY Indicate
CARRIER_PWR_ON_LED	CARRIER_PWR_ON Indicate
MODULE_3P3V_LED	Module 3.3V Indicate
3P3V_LED	Carrier Board +V3.3 Indicate
5V_LED	Carrier Board +V5 Indicate
5V_DUAL_LED	Carrier Board +V5SB Indicate
3P3V_DUAL_LED	Carrier Board +V3.3SB Indicate
5VA_LED	Carrier Board +V5D_MOD Indicate
SATA_LED	SATA Indicate
SOM_LED	SOM BOM Indicate
RISC_LED	RISC BOM Indicate

Switch Settings

ROM-6881 Switch Settings

• SW1（AT & ATX Mode Switch）

SOM-DB2510 Switch Settings 

• SW4 (Boot Select/Force Recovery/Test Switches)
• LID1 (LID Button Enable/Disable Switches)
• SW5 (LAN CONN LED Pull High Switches)
• SW1(COM0 Settings)
• SW2(COM2 Settings)
• SW3 (I2S Clock Settings)
• M2E_DISABLE_N1(M.2 Wireless Disable Switch)

接口引脚定義 (Connector Pin definitions)

ROM-6881 Pin Connector

• CN1 MIPI-CSI2 Connector
• CN2 MIPI-CSI3 Connector

SOM-DB2510  Pin Connector

•  ATX1 Pin Connector
• SMARC_IN1 Pin Connectors
• BAT1 RTC Battery Connectors
• DCIN1 DC-IN Power Connectors
• CAN0_1 CAN Bus Connectors
• CN9 GPIO Headers
• COM2_4 COM Port2&4 Connectors
• COM1_3 COM Port1& 3 Connectors
• CN10 ESPI Headers
• LVDS0 LVDS Connectors
• LVDS0_INVERTER LVDS INVERTER Connectors
• LVDS1 LVDS Connectors
• LVDS1_INVERTER LVDS INVERTER Connectors
• CN7 I2C_GP Connectors
• SPI_CN1 SPI Connectors
• SATAP1 SATA PWR Connectors
• CSI0_FPC Connectors
• CSI1_FPC Connectors
• CN5 I2S2 Connectors
• CN17 I2S0 Connectors
• PWRBTN_PH1 PWRBTN Pin Headers
• SYS_RESET_PH1 SYS RESET Pin Headers
• SATA_ACT_PH1 SATA ACT# Pin Headers
• J32 Power LED Pin Headers
• J30 BATLOW Pin Headers
• J29 SMBUS Alert Pin Headers
• J41 Core Power Controls
• PSON1 ATX/AT Mode Selection
• J56 Standby Power Controls
• J44 Module Power Settings
• J7,J8 LVDS0 Power Selection
• J9 LVDS0 Inverter Power Selection
• J11,J12 LVDS1 Power Selection
• LVDS1 Inverter Power Selection
• EDP0 /LVDS0 HPD Selection
• J14 EDP1/LVDS1 HPD Selection
• CN14 CAN0 Terminal Resistor Selection
• CN15 CAN1 Terminal Resistor Selection
• J2 DDI1 AUX/DDC Selection
• J1 DP1/HDMI1 Selection
• J58 PCIE_B_CKREQ# Selection
• J59 PCIE_A_CKREQ# Selection
• J31 Clear CMOS
• J25 +V1.8M_SPI Power Jumpers
• GPIO_0 GPIO0 Settings
• GPIO_1 GPIO1 Settings
• GPIO_2 GPIO2 Settings
• GPIO_3 GPIO3 Settings
• GPIO_4 GPIO4 Settings
• GPIO_5 GPIO5 Settings
• GPIO_6 GPIO6 Settings
• J26 HDA/I2S Selection

ROM-6881 機械尺寸（Mechanical Characteristics）

SOM-DB2510_A1 机械尺寸 (Mechanical Characteristics)

For more details regarding our 2D/3D models, please visit the Advantech COM support  service website at: http://com.advantech.com.

Board Mechanical Diagram -Front

Board Mechanical Diagram -Side1

Board Mechanical Diagram -Side2

 

Assemblly Diagram

These figures demonstrate the order of assembly needed when attaching the thermal  module and COM module to the carrier board.

快速入门 (Quick Start)

系统下载 (OS Download)

Note：LIV=Yocto Linux , UIV=Ubuntu，DIV=Debain，AIV=Android 

            LBV=BSP，LIV=Image

Platform	Product	Image Version	Release Date	Release Version	Release notes	Image Download	BSP Download Tag	Comment
RK3588	ROM-6881	DIV106011	2023/09/08	RTM	Release_Note	Baidu      Password：a887 Dropbox	RK3588_RISC_DIV106011.xml

• Alpha:  Basic I/O function bring up by RD;

• Beta:  Basic I/O function、performance and middleware verified by RD. Peripherals integrated;

• GA:  Beta version by QE verification;
• RTM:  Beta version by SI/Power/QE verification and pre-loaded;

Debian 燒錄方法 (Debiand Flash eMMC Method)

1. Usering_RKTool.

2. Usering bootup_sd_disk made_by SDDiskTool.

Linux基本使用方法

• Getting start
• MAC_Address
• Qt _Toolchain
• NPU

Linux BSP编译方法（Linux BSP Compile Method）

• Linux_BSP_User_Guide_for ROM-6881_series_Debian11