Using RKTool for ASR-A501.
From ESS-WIKI
Revision as of 04:01, 19 May 2025 by Xingxing.li (talk | contribs)
Contents
- 1 Step 0 ：For example, the PC used is a laptop. The specifications are as follows：
- 2 Step 1：Open the following file, follow the steps and double-click to install the DriverInstall program, as shown in the figure below:
- 3 Step 1_1：Change Tool language in config.ini, please change "Selected: to "2"
- 4 Step 2：Go to the RKDevTool_Release folder and run the RKDevTool.exe program.
- 5 Step 3：The test environment is set up as follows:
- 6 Step 4：Open the putty tool, enter the MASKROM mode through the debug port, then click "Execute" to start burning the OS.
- 7 Step 5：After burning, open putty to check the image version.
Step 0 ：For example, the PC used is a laptop. The specifications are as follows：
Decompress the downloaded image on the PC.
Step 1：Open the following file, follow the steps and double-click to install the DriverInstall program, as shown in the figure below:
Step 1_1：Change Tool language in config.ini, please change "Selected: to "2"
选择工具语言:Selected=1(中文)<--Chinese ;Selected=2(英文)<-- English [Language] Kinds=2 Selected=2 LangPath=Language\
Step 2：Go to the RKDevTool_Release folder and run the RKDevTool.exe program.
Note: Please ensure that the path for burning the file is correct.
Step 3：The test environment is set up as follows:
Step 4：Open the putty tool, enter the MASKROM mode through the debug port, then click "Execute" to start burning the OS.
Method 1: After powering on and starting up, press "Ctrl+C" to enter "u-boot", input the "rbrom" command, and enter the MASKROM mode.
Debian ：
Hit any key to stop autoboot: 0 rkboot # <INTERRUPT> rkboot # rbrom
Method Two: Press the "MASKROM" button, then power on and turn on the device, and it will directly enter the MASKROM mode.
Step 5：After burning, open putty to check the image version.