AOM-DB3500 SPI CN1&SPI SN2&CN2 I2C——I2C/SPI
From ESS-WIKI
Revision as of 07:52, 9 December 2025 by Xingxing.li (talk | contribs) (Created page with " === '''I2C Pin Header''' === AOM-3821 has two I2C-PIN-Header channels. {| border="1" cellpadding="1" cellspacing="1" style="width: 500px;" |- | colspan="4" | '''I2C-PIN-Hea...")
I2C Pin Header
AOM-3821 has two I2C-PIN-Header channels.
| I2C-PIN-Header | |||
| I2C Number | Bus Number | I2C Address | AOM-DB3500 Number |
| I2C0 | 5 | 0x51 | CN2 |
| I2C1 | 3 | 0x51 | CN4 |
| CN2 CN2 Connector Pin Definition | |||
| Pin | Signal | I/O | Description |
| 1 | GND | Ground | |
| 2 | I2C0_DATA | I/O | I2C0 Data |
| 3 | I2C0_CLK | I | I2C0 clock input from host. |
| 4 | +V1.8 | 1.8V Source | |
| CN4 CN4 Connector Pin Definition | |||
| Pin | Signal | I/O | Description |
| 1 | GND | Ground | |
| 2 | I2C1_DATA | I/O | I2C1 Data |
| 3 | I2C1_CLK | I | I2C0 clock input from host. |
| 4 | +V1.8 | 1.8V Source | |
Using EG70 Test Board to read I2C flash. Using I2C0 as an example:
