WISE-1530 RF Continue Tx Manual

From ESS-WIKI
Revision as of 04:40, 22 August 2017 by Erick.huang (talk | contribs)
Jump to: navigation, search

Preparing for Hardware

The user needs to prepare for hardware as following:

  • WISE-1530 and WISE-1500 board.
  • WISE-1500 power cable.
  • WISE-1530 antenna.
  • USB-to-UART cable.
  • 802.11b/g/n (2.4 GHz) Wireless Access Point (AP).
  • PC running the Microsoft® Windows® 7 operating systems

Please refer to the following steps for setup a WISE-1530 boards.

Step01: Please prepare boards as below.

          RTENOTITLE

① WISE-1530

② WISE-1500

③ Power connector

④ Reset button

⑤ UART-2 connector

⑥ RF connector    

Step02: Connect the UART-2 to PC via USB-to-UART cable.

  • Install USB-to-UART driver.
  • The device will be visible in the Device Manager as below, user can use serial port tools (putty, tera term ...etc.). 

          WISE-1530 uart2.png

RF Test Command

Launch serial port tool(TeraTerm, Putty or others), you can see " Console app start, type 'help' " on screen after power on or reset.

Join: Connect to AP

    join <ssid> <open|wpa_aes|wpa_tkip|wpa2|wpa2_tkip|wpa2_aes|wep> [key] [channel] [ip netmask gateway]

    Ex: join RT66 wpa2_aes 987135238

Ping:  

    ping <destination> [-i <interval in ms>] [-n <number> / -t <continuous>] [-l <length>]

    Ex: ping 192.168.1.1 -i 1000 -n 10

Iperf: Test continue Tx

   iperf [-s|-c host ip] [options]

   -u: use UDP mode

   -t: time(second)

   Ex: iperf -c 192.168.1.1 -u -t 30

BT Test Command

Input "bt_wifi" in console to test ble_wifi_introducer function.

You can refer WISE-1530_SDK "Example: BLE WiFi Introducer" section and follow steps.  If the join is successful the BLE will stop advertisements.

Retrieved from "https://ess-wiki.advantech.com.tw/wiki/index.php?title=WISE-1530_RF_Continue_Tx_Manual&oldid=8068"